Mazworx SRVQ Bell Housing Swap

Рет қаралды 27,619

8 жыл бұрын

This video shows how to cut off the stock bell housing and install the new one. It also covers the shortening of the striker rod.

Пікірлер: 28

@angelluis356 6 жыл бұрын

Do you guys offer this bell housing for the KA24de ?

@180sxdeano 3 жыл бұрын

how dose it drive in a s13? feel like a stock shift/noise level?

@PalomarJunkie Жыл бұрын

Does it require any transmission tunnel hammering to fit in to a 240sx s14?

@PeterHatch-mx7zc 4 жыл бұрын

Do go with a sikky or a collins adapter ??

@arnaldograceski6185 7 жыл бұрын

Does the adaper plat fits both 05-06 and 07-08 CD009? And what you guys offer for the clutch?

@bransonfleischman2233 4 жыл бұрын

Arnaldo Graceski this uses any normal sr20 flywheel and clutch according to their website.

@jason79812 4 жыл бұрын

CAN THIS ADAPER USING ON A FF BASE TRANSMISSION?

@britneyshaw8191 7 жыл бұрын

I want this so bad for my sr20 s13 but curious what year is the 350/370z trans I know there are about 4 different reversions depending on years and do I need computers for the rev match versions

@mazworxracingengines 7 жыл бұрын

This kit works with all versions of the CD009 and no computers are required for any of them to function.

@Joseph-ex9kh 3 жыл бұрын

What to do with the sr20 speed sensor to still work the oem gauge cluster?

@180sxdeano 3 жыл бұрын

i think you need to get a ABS diff, and run the speedo wiring through that sensor in the diff, via a dakoda digital speedo corrector

@Kuidmaster 7 жыл бұрын

What about adapter plates ? Is it just a matter of cutting the plate's thickness from the bellhousing lip and bolt everything up ? Bought a plate for the CAVG swap.

@mazworxracingengines 7 жыл бұрын

Hey man, If you bought our adapter plate is basically that, however; you need to machine the dowel pin locations as well. If you'd like a machining blueprint email sales@mazworx.com

@Kuidmaster 7 жыл бұрын

Will do, thank you !

@arnaldograceski6185 7 жыл бұрын

What do you guys need to make the s2000 bell housing happen? I have and extra s2000 trans If you guys could find a block to make this happen

@mazworxracingengines 7 жыл бұрын

We would need a stock chassis with an engine and trans in it for a couple of months to develop the kit. As per your transmission question the adapter plate we currently offer only fits CD009's off of the VQ35de engine. We only sell the adapter plate, Competition Clutch sells the clutch components you will need.

@JohnSmith-qj4cf 3 жыл бұрын

Do you have to a ls1

@khaldrogo9451 Жыл бұрын

This is such a hack. You can get adapters that don’t require you to cut things out that much.

@FordSierraIS 5 жыл бұрын

i can keep my s14 sr20 clutch and flywheel right?

@mazworxracingengines 5 жыл бұрын

Yes!

@arnaldograceski6185 7 жыл бұрын

Can you guys make something like this for s2000 engine and how much?

@mazworxracingengines 7 жыл бұрын

Hello Arnaldo, We would love to produce a kit like this for the S2k community, unfortunately we have just never been able to get a car in the shop for development. We currently only offer the adapter plate listed on our website.