MCD Installiation of Grip and Lever Covers for Indian Motorcycles
Рет қаралды 79,421
6 жыл бұрынThis is our instructional video for installing our
Grip and Lever covers custom made for Indian Motorcycles.
The process is the same for both Grips, and Levers.
You can purchase our custom grips and levers, at
www.markscustomdesigns.com/
Amazon and eBay as well.
Thanks for your support!
Ride Safe.
Mark & Josh
@rudolfbuchcar7092 3 ай бұрын
Nejlepší video o šití kůže👍
@fredkeller3813 Жыл бұрын
Nicely done, thank you!!
@A.C.E409 2 жыл бұрын
Very nice
@vjdab 2 жыл бұрын
Great 👍
@lgen626 4 жыл бұрын
Beautiful. Thank you.
@casemaker 9 ай бұрын
As soon as one stitch breaks the whole seam will open. Better to do a real 2 thread baseball type seam than cheap out like this.
@bmfilmnut 5 жыл бұрын
Very nice. The only problem I can see is that you'll be working on the bottom of the clutch side grip which would be very awkward. At least on the throttle grip, you could turn the throttle and hold it in place while working with a throttle stop or some other rigged setup.
@mcd6767 3 жыл бұрын
Bob, While you can install them with the stitch line facing down, 99% of our customers ask to have them installed with the stitch line facing straight back.
@teslamotor8501 4 жыл бұрын
Needle choice false, you must Leather needle
@mcd6767 3 жыл бұрын
The needle being used is a leather hand stitching needle.
Oakmoon Life // Leathercrafting & more
Рет қаралды 37 М.
Sergio Outdoors
Рет қаралды 64 МЛН
Merry Craft
Рет қаралды 1,9 МЛН
nels_canada
Рет қаралды 3,5 М.