WELDING IN DUMPSTERS - MAKING EASY CASH MONEY

WELDING IN DUMPSTERS - MAKING EASY CASH MONEY - PRIMEWELD

Рет қаралды 28,135

5 ай бұрын

Adding some D-rings to this dumpster. Came out great. another side job done with a nice chunk of cash in my pocket
Wanna send me something?
MCF WELDING
95 WEST MAIN ST
STE 5, BOX 167
Chester NJ 07930
OLIGHT POCKET LIGHTS -
www.olightstore.com/s/Q8ZHMZ
coupon code-MFWG10
WELDING LENS I USE -
www.rod-shield.com/s/shop
SAVE 5% PROMO CODE - MCFWELD
Hibana Welding-
hibana-welding.com/
To get in contact with me - mcfwelding@gmail.com
:
INSTAGRAM - / mcf.welding
Check out some of my other videos!
Subscribe and like for more welding
#welding #weldrepair #snowplow #migwelding #stickwelding #landscape #contractor #fabshop #rustrepair #plowing #newjersey #dumptruck #cummins #diy #cuttingtools #plasmacutting #trailer #truck #dodgeram #grinder #sidehustle #sidework #primeweld #mig180

Пікірлер: 105

@scrapperstacker8629 5 ай бұрын

He said Stripper! lol. Reminded me of a Go Go bar off exit 7a on the Jersey turn pike right outside Ft Dix. Probably not there anymore.

@americathefree3708 5 ай бұрын

Since I have hauled equipment for years, i would have set the corners at 45 degrees. Thank you for the video!

@mcfwelding 5 ай бұрын

I did think about that, will most likely do that for the next one do

@DonnyBwelding1 5 ай бұрын

Love your stuff brotha, respect.

@jacobsutherland774 5 ай бұрын

Good work man🤙 I work for a waste company down in Florida and gotta weld on these all the time. It ain’t glamorous but it pays good 🤷‍♂️

@mcfwelding 5 ай бұрын

Right on

@yourotherlefthand 4 ай бұрын

Love your videos. Informative as well as entertaining!

@gillihansmobilewelding 5 ай бұрын

Those d-rings will be there when he scraps that thing. Great looking/strong welds brother. You were right about the Primeweld too. I was just using it for aluminum but I'm glad you talked me into using it. I've been blasting .045 flux core like butter. It is a beast! Believe it or not, I'm allergic to miller lite. It breaks me out in big welts.😮

@mcfwelding 5 ай бұрын

told ya, them prime welds can eat

@freebirdwelds 5 ай бұрын

Nice Job!

@scottjune3554 5 ай бұрын

Oh man, halfway through, and I gotta go back to work. We'll catch up to ya later. Good video so far.

@scottjune3554 5 ай бұрын

Be looking forward to the next one

@mcfwelding 5 ай бұрын

Thanks scott

@ozzyfranf 5 ай бұрын

You seem like a very hard worker. I have one of those Arkfeld lights that laser is incredible.

@BMGProjects 5 ай бұрын

I’ll have to get one of those Olights.

@mcfwelding 5 ай бұрын

yea check out the arkfield one that's what I use

@cowboy915100 5 ай бұрын

When you are welding with 7018 and your coming off your weld flick the rod. It will get rid of that hat ball on the end. Then pinch the tip of the rod with two fingers and pull the flux off the tip. It will restart better.

@harambeneeds50subs20 4 ай бұрын

Grab the pulling it off not bad?

@Richard-pz6ci 5 ай бұрын

I found when using a stripper disk, it works better and lasts longer using a variable speed angle grinder. They last longer running at a slower RPM.

@mcfwelding 5 ай бұрын

I do want to get a variable speed grinder

@tntltl 5 ай бұрын

I have an old twist Jackson's stinger an I think it's the best. If the rod get's stuck I just turn and pull out in less than a second. I twist it to any angle.

@viking8781 5 ай бұрын

I think the scotch brite cleaning wheels for the grinder work better than anything else ive tried for millscale

@evansaxonindustrial6109 5 ай бұрын

I need to start YouTubing cause I have 28 40yrd roll offs and five dump trucks at my shop to rebuild and repair……… keep rocking buddy there is a lot of this kind of work out there!!

@mcfwelding 5 ай бұрын

do it up, cant hurt to try

@MrSprintcat 5 ай бұрын

I talked my buddy into getting that same welder, hey prime weld send me some swag😅should have named the video dumpster diving 😅. Thank you for the video

@mcfwelding 5 ай бұрын

Thanks for watching

@toddcaskey9984 5 ай бұрын

Keep the vid's coming 🤪

@mcfwelding 5 ай бұрын

will do!

@deanl2427 5 ай бұрын

I always have a file handy. I will do a quick drag on it with my 7018 rod and restrikes are really easy. That stinger was most popularly made by Bernard called a Shortstub. I had one and personally did not like it at all. I just like to squeeze and drop the stub. I love my V Stinger, but I mostly use a compact Lenco AF-2, 200A. It's all personal preference.

@mcfwelding 5 ай бұрын

File is a good idea, I sometimes tap in on the garage floor also

@deanl2427 5 ай бұрын

When I tap, it sometimes chips off the flux. That's why the file works well. Anyway, stay safe!@@mcfwelding

@nickestnickthereis 5 ай бұрын

I got an o-light before i came across your channel, but i agree they are awesome lights

@mcfwelding 5 ай бұрын

That they are!

@charliehuntsman9827 5 ай бұрын

I restart 7018 on RR crossing all the time ( Boss calls, Chuck why did it take you 3 hours to weld to crossing pads together ) 🤔 damn 7018 rod SOB lol 🤣 love your videos man really hoping I can get a little weld shop setup this year with all prime weld looking into the 285 and for tig the new 325 .

@mcfwelding 5 ай бұрын

you wont be disappointed with primeweld

@thebruteforce1 5 ай бұрын

I love the twist stingers. Much easier to handle for me.

@mcfwelding 5 ай бұрын

my favorite

@jensensynthetics 4 ай бұрын

I love the stripper disc's. Won't use anything else for mill scale.

@hezakiahcooper-smith4060 4 ай бұрын

Man I flinched when he started chipping with the camera close up😂

@mcfwelding 4 ай бұрын

Haha sorry

@dj1143 5 ай бұрын

I think those stingers are cool but I like the battery clamp style

@imnohble5214 4 ай бұрын

Stinger V II is the best electrode holder ive used. good for 300amps.

@mcfwelding 3 ай бұрын

tats one I've never used yet

@harrold901 5 ай бұрын

Any stinger to get the job done is the best stinger for the job.

@ajsironworks3937 5 ай бұрын

Hobart 7018 if I had a guess. Dude that’s a nice welder. I have two everlast welders and a Hobart mig. What happened to your everlast mig? Like the side hustle videos. And….. no painting it hot???

@mcfwelding 5 ай бұрын

I think it was the murex i had or older lincoln. Nah this didnt get deamed worthy enough to even paint lol

@sibosifraiscompagny 5 ай бұрын

It's really funny to see you using stick welder inside the shop and flux core outside!! Stick and flux core weld inside for me it's a nono except if my mig welder cant push the amp I need to get enough penetration. Do you think that you regret not buying the 285?

@mcfwelding 5 ай бұрын

I mig welded outside? Do you know the difference between mig and flux core? Guess not

@sibosifraiscompagny 5 ай бұрын

@@mcfwelding I should have type, why you dont mig weld your part inside and if you have the mig285 from primeweld instead of the 180 you would mig weld the part instead of stick weld inside the shop?

@mcfwelding 5 ай бұрын

The mig 180 was perfect for this job. I like to stick weld more then any other process so ill stick weld alot of things if i can

@jakemccann2790 4 ай бұрын

Just wondering if you have any combustible products under your bench , that pail ? Great video great work, nice you are looking out for customers interest by calling them

@mcfwelding 4 ай бұрын

bench has a piece of ply wood as a shelf lol... there is a lot of flammable things in my garage so I always keep an eye out after I weld

@user-if6ce3lp9i 5 ай бұрын

Whats your thoughts on a miller matic 211 for Mobile i only run flux core with it

@mcfwelding 5 ай бұрын

i had one i liked it but plenty of less expensive options for the same result

@scottjune3554 5 ай бұрын

I haven't reached the end of the video yet so you might answer my question in it but did the mig gun hold up?

@mcfwelding 5 ай бұрын

She held in there

@Luke3420 5 ай бұрын

Did you ever try 35 duel shield fluxcore in you mig welder?

@mcfwelding 5 ай бұрын

Not yet, would like to

@mdmwelding3189 5 ай бұрын

Good job ❤ the videos

@myroost2urface431 5 ай бұрын

Not sure where that mask fits onto your face but facial hair should be freshly shaven to create a sufficient seal against the face? Maybe throw a fan on you while welding? Love the vids can't wait for the aluminum videos 👍

@gillihansmobilewelding 5 ай бұрын

He was mig welding so a fan wouldn't be a good idea. Those masks work great though, even with some facial hair. 👍🏻

@mcfwelding 5 ай бұрын

The respirator helps even with a beard but I agree a clean shaven face is better.

@JRsVsO 5 ай бұрын

I know a guy that owns his own dumpster/hauling company and he's asked if I could do something similar to one or more of his dumpsters. Wondering what you charged. I'd be doing the plates in the dumpsters using .035 flux core.

@mcfwelding 5 ай бұрын

depending on material and what you charge an hour will reflect your price. I charged hourly for this and took me about 5-6 hours total

@JRsVsO 5 ай бұрын

@mcfwelding thanks for the reply. That's about what I was thinking. I always charge for materials, including consumables, depending on the job, then labor per hour with a 1 hr minimum. I appreciate you telling us that you order your steel parts on eBay also. Never done that since I have a good steel supply near me.

@luisgarcia6739 5 ай бұрын

What brand paint stripper disc is it?

@mcfwelding 5 ай бұрын

benchmark I believe

@FinesseCreates Ай бұрын

Just here learning. What kind of welding is this considered? MIG?

@mcfwelding 10 күн бұрын

yes

@Osiris0925 5 ай бұрын

What head gear are you using on your lid there? It doesn't look like the stock fiber metal one

@mcfwelding 5 ай бұрын

retro-fitted jackson head gear on it

@Osiris0925 5 ай бұрын

@@mcfwelding do you have a link to the one your have used?

@mcfwelding 5 ай бұрын

Google jackson head gear, most weld supply sites will have it

@Osiris0925 5 ай бұрын

@@mcfwelding awesome thank you sir. Keep up the great content

@hubertrobinson8825 5 ай бұрын

It might be 14gauge if it's less than 1/8 in same thickness as the 3/32 rod

@mcfwelding 5 ай бұрын

I think it as less then 1/8" after i looked at it for sure

@zenteno5p 5 ай бұрын

i got a Q? how much do you charge for that kind of job

@mcfwelding 5 ай бұрын

charged by the hour, 5 hours total plus material.

@subpoenacontrol3799 5 ай бұрын

Ever thought about teaching? I’m in

@mcfwelding 5 ай бұрын

No, I wouldn't be a great teacher lol

@bayoutrapper3782 21 күн бұрын

I do not envy you. I've done dumpster s one (1) time. Ill have to be starving before I do that again

@wdsracer 5 ай бұрын

Una fukin dilla!

@mcfwelding 5 ай бұрын

fuckk yea

@lilbfrom614 5 ай бұрын

To do these side jobs would i need a license?? 🤔

@mcfwelding 5 ай бұрын

Im not sure

@zenteno5p 5 ай бұрын

i git my own rig welder i do the same am just got all my welding certs and that's it i never have problems greetings from Phoenix Az

@lilbfrom614 5 ай бұрын

@@zenteno5p how hard is it to get work bro? I'm from Cali so I assume our job market is similar

@scrapmanindustries 5 ай бұрын

@@lilbfrom614 it depends how good you are at talking to people. If your not afraid to walk up to every landscaper, quarry, or construction crew you pass you’ll find tons of work. If you make excuses as to why you shouldn’t approach potential customers then you’ll be kinda struggling.

@lilbfrom614 5 ай бұрын

@@scrapmanindustries where are you from?

@1osmosiss Сағат бұрын

Get a MIG welder

@sparkywelder5893 4 ай бұрын

That’s 14 gauge

@user-xu6sr2tv1m 5 ай бұрын

😂

@mcfwelding 5 ай бұрын

@francisca7547 3 ай бұрын

*Promo SM* 🤪

@MrBigtom06 5 ай бұрын

You should get a fan to keep the fumes out of your face. Not good breathing those fumes

@mcfwelding 5 ай бұрын

I was wearing a respirator

@MrBigtom06 5 ай бұрын

@mcfwelding yea I saw it later on in the video.

@user-xu6sr2tv1m 5 ай бұрын

Why don’t you buy a real migraine welder ?

@mcfwelding 5 ай бұрын

Because I don't want a migraine? Who would that

@exwldr6945 10 күн бұрын

Complete Waste of Time & Materials Trying to Weld to That Junk Floor!!

@mcfwelding 10 күн бұрын

Good thing YOU didnt do it then!

@1osmosiss Сағат бұрын

Dirty stinky no thanks

@1osmosiss Сағат бұрын

Stop breathing that shit in, I’ve got copd from welding

@andrewrobertson9771 4 ай бұрын

I can not stand twist stingers. For doing XRay welds those are horrible If you stick the rod you have to twist to let go. Stand a chance of arc strike , and welding inspector do not like that !!!!!!! maybe structural steel would be great. Thank you for all your videos.

@mcfwelding 4 ай бұрын

thanks for watching