Thanks for watching! Glad it brought back some good memories

I like the '80s. Giorgio Moroder...

Don't screw with my disco Nadine!

Thanks, Curtis! Always glad to be able to share my builds/process. Thank you for the comment and for watching!

Thank you and thanks for watching!

I feel the same way about how it still looks cool today! Thanks for watching!

Thanks! Thank you for the kind words and for watching :)!

Thanks, Gary! And thanks for watching. Glad to hear you won many races with it! One my favorite kits and build. You should get one before they stop producing it.

Thanks, Aro800! Not sure if it’s easy! Maybe it’s doing a lot of it and practice. Thanks for watching.

Thank you! And thanks for watching. Really appreciate it :).

Thank you

Haha! Apparently, the other half doesn't like calloused hands. Thanks for making me laugh and thank you for watching.

These gloves are all I can look at..

smokengreen, thanks for watching. I used to work on cars but I actually have nerve damage so it hurts touching with bare hands sometimes.

@@MechanicAfterHours Sorry to hear that, I took few precautions in my younger days but now that I feel the effects I know better. It's mostly the chemicals I worry about. My SO sure prefers when my hands aren't all dry and cut up also.

Thanks and no problem. Yeah, it's something no one tells you about hehe. So now I have to be more careful. I even use disposable gloves when I clean cars because of the chemicals. My dad has it worse and his hands feels like a tree bark.

Hi David. Thank you and thanks for watching! Appreciate the comment!

Thanks, funkchild75! I appreciate the feedback and thanks for watching.

Thanks for watching and glad it brought back some good memories! That was a nice RC for a 12 year old! And I feel the same way about those straps. Wish the mechanism was better.

@@MechanicAfterHours well my first was a lunch box my brother bought for me when I was 11. I built it ran the crap out of it every day for months. Tower had a special on it cause the optima mid was just out... I payed 129.99 for an original Javelin kit lol using money from my paper route to buy it. I took the radio from the worn out Tamiya and dropped it in. The original mech speed control was junk. My brother bought me a futaba 112b esc and a trinity 16t single 427 motor. I had a 30mph rc in the 80s lol. Those are the memories you brought with your vid. Remember better than yesterday lol. Thank you😭 I'm still in the hobby. Have a trx6, an arma felony, and sold my xMaxx last year. Now subscribed...

Thanks for sharing your memory and I love the story. Those were the days, and when I reminisce, for me it was the golden age of RC buggies, or just RC cars in general. I still have a pristine 427 :) but the second version (0002) that's a 16x2. Can't believe that Javelin price back then--but adjusted for inflation it's almost the same price as a re-re in today. Like there's no change in price. No wonder manufacturing has to move out of the origin country. Anyway, thanks for sharing and subscribing!

@@MechanicAfterHours I'm assuming it was discontinued. The mid was on the front of the tower catalogue back then. Well anyways, don't mean to take your time up... Keep building👍

Thank you and thanks for watching!

Thanks, Raw Bot! I appreciate it! And thanks for watching.

Thanks, Dan Walker! I appreciate the feedback and thank you for watching.

Thanks hehe! And thank you for watching!

Thanks Jeroen! And thank you for watching!

Thanks for watching!

Hi Jon. Thank you and thanks for watching! Appreciate it. Although I'm aware of Monk I've never watched it. I feel like a hermit. Haha! Gotta check it out

LoL. Monk. You're not wrong though.

@@MechanicAfterHours Definitely check out Monk. I think most R/C builders have a little, somewhere inside. Thanks for the video!

Hi Brian. Thanks for watching! Ok, I think I really need to check Monk out now hehe

ok, I did check Monk! haha! I haven't gone that far yet, at least I haven't put every pair of socks in individual zip lock bags. Hehe

Although I've seen the Javelin when I was young I never had the original and I'm surprised they came pre assembled and diffs... !

Thanks, Douglas! And thank you for watching.

Thanks for watching, SlumKnot! Axials and Traxxas are pretty cool! Would like to build one at some point.

Thank you and thanks for watching!

Thanks, Martin! Yes, quite similar! The Optima is great too

Hi Rob, thanks for watching! I wish I had an Optima Mid. That's a beautiful one too.

You want to buy any i have 5 original Optima mid SE 's, Javelin's, Optima Pro's, Salute's, all fully factory sealed from the 1980's

Thanks for watching, blimey oreily! You should get one or any Kyosho kit ;). As for the chain part, there is an acrylic cover that goes on top so it's enclosed. But if you're worried about it, the kit also comes with an optional belt. You can also use that with more powerful motors. Good luck! By the way, I think the Grasshopper is a really fun buggy.

Thanks, bfmvdu28! And thank you for watching.

Thanks! And thank you for watching.

Thanks, Andrew Magro! Good luck with the build, should be a fun one. And thanks for watching!

Thanks!

Hi frankymal, thanks for watching the video. So far mine hasn't leaked at all, I've ran the Javelin a few times and the shocks seems good so far. As a side note, I can see why it can be an issue. During the build I spent a little more time than I'm used to putting on the shock gaskets (plastic/polycarbonate-like material) onto the seal cartridges. Regarding the gasket, I'm used to seeing rubber o-rings on other kits/brands. So if the plastic gasket isn't put on carefully, they can rip or overstretch. The kit does come with a few spares, just in case. There are also o-rings inside that go over the shaft and I added some o-ring grease that's supposed to provide some sealing. But if the shocks on this Javelin starts to leak I'll figure out some solution for the gasket (maybe very thin o-rings and shock sealant for the seal cartridge).

Enrico DC, Thanks! And thanks for watching. It's not a silly question :). They are Ansell gloves. I believe you have to buy a set. I might be wrong but I've had them for a while and I think they were purchased from Uline in the US.

Hi Steven. Thank you and thanks for watching! Appreciate it. Not sure I understand all the science behind negative earth, not an expert on those but perhaps noise or static needs to be considered--affects the transmitters/receivers, etc.

Every ground attachment point would be a weak spot and a potential current increase. It works on full-sized cars because the surface areas are MUCH bigger. It wouldn't be a great plan on RC cars. And with an RC car you are more likely to have a positive short to the chassis due to the dynamic nature. So you would have to build a fusebox too. There simply isn't enough room.

Thanks, Alexandru Covaliov! And thank you for watching. Glad you found the gloves! I probably will make a video series on tools but not the workplace :). Too private and not much to see--and the other half wouldn't find it entertaining ;)

Hi Eddie, thank you and thanks for subscribing! The easel is just some generic brand that I've had for some time. It's labeled as a book stand and most likely Amazon will have it (if you have access to Amazon).

@@MechanicAfterHours Thank you for the information. I actually found one I really like on Amazon!

Cool! Glad you found what you’re looking for

Definitely agree!

Thanks again! And thanks for watching. It's one my favorites and you also get a belt drive with it but I think the chain is more fun and nostalgic.

Thanks, keithrx3c. I use a Gforce torque driver.

@@MechanicAfterHours Thanks, where would I find the stand you have for the manual?

Not sure where you are but you can get it from Amazon. I can't remember the specific brand because it's been a while since I had it but it's a book holder. I hope that helps.

Thanks for watching! I hope I understand what part you're referring to-if so it is plastic and I replaced it with the optional 7075 aluminum Hard Front Support Part Number OTW112 seen here: kzfaq.info/get/bejne/id6cmrmr39mqhKM.html

@@MechanicAfterHours Yes that is the part I just now saw that you wrote it in the video. I am glad you are using the aluminum one. Also, I was bewildered seeing some guys on youtube driving these pretty hard and fast because I do know that the chain can stretch and that over powering can wear out the sprocket. I wonder if kyosho made improvements for more power.

I try to limit the motor power on these re release cars. But I believe Kyosho has updated some of the parts (metal and stronger nylon pieces) to work with modern electronics like brushless motors and LiPo. In addition, if you want to go further, there’s an optional precision machined nylon spur gear (it’s bluish in color) designed for brushless motors. Included in the kit is a belt drive if you prefer to not use chain-and that also comes with a diff pulley designed for belt. Then there’s the slipper clutch and metal final gear case that’s included. As an option, you can use the Scorpion’s HD slipper pad to replace the stock ones and that’s what I did. Some indirect parts like the stock beefier shocks, newer aluminum parts, and optional universal shafts could help. Not sure what the power limit is with this Legendary series car but I personally would limit it and run the car for nostalgia over high speed.

@@MechanicAfterHours Hey thanks man for all the info. I recognize some of those hop up parts as they were mentioned on a custom ultima rebuild video and used with the 1987 IMFR champion. You almost need two kits one for driving one for shelf queen haha. Keep up the great content 🙂

Thanks, Adam! Sorry for the late response, the book holder is just from Amazon. Sorry no link as it was a purchase from a long time ago

Hi Tim, I'm glad you're enjoying the video. Congrats on getting a Turbo Optima! And yes, they're quite identical. I would say these re-release Kyoshos are truly beautiful kits with great quality. I sincerely enjoyed building this one. As for the tool, it's an RC shock pliers. It's really helpful and I would never go back without one. You can also use it for certain metal pivot balls that need to be set into tie rod ends, etc. as long as the size is right. You can also use it remove them. At the same time, they keep damper shafts from getting scratched when you need to tighten them. There are many brands but the one I use is a ProTek RC TruTorque Shock Shaft Pliers. It has slot placements for different shaft sizes. Good luck with the build!

@@MechanicAfterHours : Thanks for the reply and the info regarding the specialty tool. I'll look into that. Being back into RC after 35 years, I was so excited to see all the re-released models I so badly wanted, but couldn't afford back then. Now I'm able to and I'm enjoying being back in the hobby.

@@toolman8269 No problem at all. Same here- couldn't afford it back then and I would just daydream and watch races. Time flies!

Hi Marc, I used a stock Kyosho G2X 20T single brushed motor and the ESC is a Reedy SC550. But I would've preferred spending more and just getting a Kyosho Le Mans 240S 15.5T brushless motor (#37032) paired with a Le Mans 240S ESC (#37051). It's quite more expensive but probably worth it for this Legendary series. They're also listed as the optional parts in the manual.

@@MechanicAfterHours thank you for taking the time to reply. I looked at the Le Mans but too pricey for me. Thanks again.

Marc, I updated the info. I actually used a Reedy SC550 ESC.

Thanks, nerk23! I'll see what I can do (just don't have much room in my little space). But thank you for watching!

@@MechanicAfterHours ..😉

Thanks for watching. If you want something newer with some upgraded parts the Optima Gold is a good choice. I believe Kyosho still makes 1/8 cars but probably it'll modern ones and some are nitro.

Thanks, Nic! Although I haven’t built that many kits yet, I enjoyed working on the Kyosho Scorpion the most. Even if it’s simple, almost everything fit quite well, assembly was quite smooth/intuitive, and I didn’t have to think much during the build-not because it was simple but because everything fell into place and made sense. The Javelin is up there too but the room for all the electronics isn’t enough. Some of the Scorpion’s parts are quite impressive especially for the price you pay-compared to a Tamiya of the same level. I think if I had another go building a Scorpion it can be done in an hour or less. Minus the body. Thank you for watching!

@@MechanicAfterHours when I was a kid I built a Frog, Hornet and a Toyota Celica but never a Kyosho. Always fancied one, I'll have a watch if your Scorpion video. Thanks for the reply =) PS. Love how neat you are, I'm the same.

Thanks. Nic! I would like to have a Frog and do some custom work on it! Maybe one day.

@@MechanicAfterHours looking forward to seeing that.

Hi wheejee_rc. Thank you and thanks for watching! If you do want one I'd say you should get it if you come across one. The Javelin has been low on supply lately. I still have to upload a run video but it's relatively fast especially for buggies around that era. It shares the same chassis as the Optima. With the right motor and gearing you'll be able to get it up there. And perhaps using the supplied belt drive instead of chain. Although some of the components are updated (vs the original), you still have to consider that the chassis design was from 35 years ago. The motor I have in it is a brushed 16T double with about 30k rpm and so far it's not a problem. But it's very capable and solid, you just need to know what parts to upgrade. Good luck!

@@MechanicAfterHours I think the chain adds to the charm of this rig.

Definitely! Agree with you on that. I went with chain for nostalgia. But I think if you want to push it in terms of speed, belt might be more efficient/safer as it won't stretch the chain links. Me, I just put a reasonable motor to enjoy.

Hi there. Thank you and thanks for watching! The driver is a Muchmore racing driver and if you look it up there should be various vendors selling it. It's ideal because the torque settings are limited vs other kinds of drivers so it helps a bit when you want to prevent threads from getting damaged. I didn't go with chrome wheels, on my part 2 video I ended up using black. Thanks!

@@MechanicAfterHours thank you for the info, and good choice sticking with the black.

Thank you and thanks for watching! The manual stand I was from Amazon, it’s just a generic book stand and is not branded. Had it for quite some time. I don’t know if I’ve used a drill here but I’m going to assume you’re asking about the electric driver, it’s a Muchmore driver.

@@MechanicAfterHours Yep I ment the electric driver :-) I'll try to find the book stand or one similar. Great for save some working space it seems :-)

@@MrCaprinut Good luck with the search!

Thanks, you might be able to find a pen with a very, very fine tip if the standard isn’t up to par. And it takes a little while, I try not to rush it

Thanks. Am trying 0.8mm and it’s a little cumbersome - not as neat as you make it look. I need to find my groove!

What?!! Haha! Made me laugh. Thanks for watching.

Still on the toilet

Thanks, Bert! Electronics: Ko Propo PDS-2514 Power servo, KO Propo KR-211FH receiver, Reedy SC550 ESC. I got the white body kit from Kyosho online (www.kyoshoamerica.com).

Hi and thanks for watching. Bought it in the fall of last year. And depends where you are I guess. Supply has been low

Thanks! Too many tools to list but maybe one day I can make a website to showcase the tools

@@MechanicAfterHours great, that sounds good:-)

Thanks, Nicolas! The orange roll cage comes with the kit. It's standard. The white one is aftermarket from Kyosho that I bought separately.

@@MechanicAfterHours thanks to you i bought it!! But... can't find the white body... maybe because of your video too!! 😉

Hi Lucas Geniar. Thank you and thanks for watching. The gloves are from Ansell under Mechanical Gloves. Check their site as they have different kinds. Good luck.

@@MechanicAfterHours Thanks, found them at a local supplier and ordered a set, they look really good for hobby projects. For anyone else, it's the Ansell HyFlex® 11-618 www.ansell.com/eu/en/products/hyflex-11-618

Hi Lucas Geniar. Glad you found them! They are one of my favorites. I used to use them when I worked on my 1:1 cars. Had a stock of them so I still use them. I do have some nerve issues on my fingers and sometimes it bothers me, so the gloves help.

Thanks for watching, Onni Hynninen! I do use brushless, but for some like this vintage car I like to use period correct motors just for character and nostalgia.

Thanks for watching, MisterBrown! It also comes with an optional belt drive if one prefers. Not sure what Kyosho's deciding factor was back in the day. If I think of motorcycles that use chain, belt, or shaft, I think that chain was a choice probably for a smoother drive and also helps with turns especially on rough terrain, less shock to the drivetrain during acceleration/braking, and less slipping. Seem like it's in between belt and shaft-and serious RC race kits nowadays are belt.

Thanks, Blender Forever! Thanks for watching

Thanks, Vladimir! I guess it depends where you are but online might be the best place or your local rc/hobby store. Got mine that way.

@@MechanicAfterHours ok, i foun one for 44k Yuanes, its about 400 USD!

Not sure if that’s the going rate for the Javelin in your country. They’re not as easy to find now but when it came out it was about $319 USD. But not sure how much they are now.

Hi there. Thanks for watching. Let me get back to you on this. I'd have to go back and check, and list everything. However, if you're really sold on the kit you should try to get it because the supply has been quite low.

@@MechanicAfterHours Thanks for your help! Actually I bought this kit two days ago. I couldn't wait to see the complete car, so I finished building the kit not adding the options. Wow, it's just... beautiful.

@EndlessBattery Wow! Congrats. Glad you were able to find one! You can also buy an Optima body shell if you want to switch things up when you get bored-just need to get some of the attachment parts. Sorry I haven't had a chance to go over the exact parts because the car was stored for the winter and I just pulled it out. However, on my other video where it's complete you might get an idea on what parts are in there. But, the motor was updated to a brushed Kyosho Hi Torque 16x2 motor (30k rpm), Reedy SC550 ESC, and some hard alloy parts like front support, servo area, and them gold kyosho optima turbo underbody-all Kyosho optional parts. Even the wheels and tires are Kyosho. The servo is a Ko Propo PDS-2514 paired with Ko Propo KR-211FH receiver. The wing is a Pargu wing and some pvc I cut to cover up some of the lower areas. I think that's pretty much it-aside from the decals. Anyway, glad you have one and I hope you enjoy it! Take good care of it!

Thanks, Midas touch and thank you for watching. You can use brushless but I wanted to pair the kit with brushed since the car came out in 1987.

@@MechanicAfterHours I thought it came out 2020 sorry

No problem at all! The original came out in 87 and this is a 2017 re-issue of that model (but Kyosho did a few component upgrades).

Thanks for watching! Unfortunately, it's not easy to find new in box ones nowadays. I don't know it they still make them or if it was a limited run. Aside from eBay, depends where you are, you can check RC hobby shops online in your country. Or you can check www.kyoshoamerica.com Good luck!

Yes it does

I'm unsure about how long it will hold up for bashing purposes but I use a generic "acrylic white pen" with a smaller tip--about .6 to .7mm. It's water-based.

@@MechanicAfterHours thank you

Hi Matt Luszczak, they are Ansell Mechanical Hyflex Gloves.

@@MechanicAfterHours thanks bud

No problem and thanks for watching!

Thanks for watching, GroMyke H. The kit doesn't come with a motor or any electronics. However, you can install a brushless motor.

Suchender W, it’s a Husky drawer liner.

@@MechanicAfterHours thx

Hi there and thanks for watching. The re-issue is made in Taiwan. I'm not sure if there are some components in the kit that are from Japan. However, most of the Taiwan stuff is quite excellent since they've been producing RC parts and electronics for quite some time-and I'm sure the molds are the same from the original for most parts.

@@MechanicAfterHours hi M A H... ' thank explain... wish american made R/C kyosho models

No problem. Unfortunately, there probably are far fewer made in the US rc related products-MIP still is. But even the American RC car brands are rarely made in the US and some have already been bought by other international companies-like Team Associated is now owned by Thunder Tiger (Taiwan) or HPI owned by Vestergaard (Denmark). I would prefer Kyosho to stay Japanese! I think the brand benefits from being a Japanese rc engineering company because they’re still making some exciting things. HPI used to do so much in the early days and after each acquisition not much has been going on.

@@MechanicAfterHours hi M A H... ' 2 different kyosho models are both countrys makes... kyosho blizzard is a china... kyosho car is a taiwan... mixs kyoshos are china / japan / taiwan... traxxas is a taiwan... tamiya is a big mix asia

It's not! He's that fast!

Thanks!

Paul, thanks for watching! Haha ;)

Hi redfish6. Thanks for watching. Sorry the music isn't good. I'll try better next time.

@@MechanicAfterHours it's nothing, it is not serious. keep making us dream !!! ✌️

Thanks! Will do!