Mechanically Stable Monowheel

Рет қаралды 305,552

6 ай бұрын

Ad: Thanks to PCBWay for sponsoring this video:www.pcbway.com/
I previously built a small MonoWheel which is a single wheel that runs along with one motor driving it. It balances on its edge like rolling a coin. Monowheels have been built large enough for people to ride in, which looks like a fun project.
My monowheel had some stability control which measured the angle of the internals and modified the motor speed. This meant that the internals always remained at one angle instead of oscillating between driving up the inside of the wheel and falling down again, which is what happens if you just run the motor at a constant speed.
But is there an easier way to make a fun radio controlled vehicle which is inherently stable?
CAD & Code: github.com/XRobots/PedrailMon...
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: / discord
Patreon: / xrobots
Merchandise: teespring.com/stores/james-br...
***************************
Other socials:
***************************
Instagram: / xrobotsuk
Twitter: / xrobotsuk
Facebook: / xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at www.3dfuel.com/XROBOTS - use code XROBOTS at the cart screen.
Music for your KZfaq videos: share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: www.3dfuel.com/
Lulzbot 3D Printers: bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk/
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: bit.ly/2RhArcD
3D Printer Filament: bit.ly/2PdcdUu
Soldering Iron: bit.ly/2DrNWDR
Vectric CNC Software: bit.ly/2zxpZqv

Пікірлер: 730

@akumabito2008 6 ай бұрын

Ahh yes, the famous two-wheeled monowheel... 😂

@Sandux930 6 ай бұрын

You and me Big Wheel, we could rule this city, or just... fight to the death!

@nordishkiel5985 6 ай бұрын

Stereo Wheel would fit, especially with the independent steering and suspension

@Draugo 6 ай бұрын

Yeah not really a monowheel now is it.

@stoatystoat174 6 ай бұрын

Two-wheeled or Twheeled

@janikarkkainen3904 6 ай бұрын

My thoughts exactly. :D

@jaspurr7467 6 ай бұрын

A monowheel with.... two wheels?

@CmdrMartinThompson 6 ай бұрын

Exactly my thoughts 😅, doenst make it any less cool though!

@Eidolon1andOnly 6 ай бұрын

@@CmdrMartinThompsonIt kinda does. It would be much cooler if it had a more accurate name.

@davidaugustofc2574 6 ай бұрын

If you consider the air between both wheels to be a part of the contraption

@Eidolon1andOnly 6 ай бұрын

@@davidaugustofc2574 James' justification for calling this thing a "monowheel" is that the two sections are identical and not mirrored, so therefore the two parts are actually a single part.

@Hunter-ck1zy 6 ай бұрын

@@Eidolon1andOnly yeah but each side is independently driven so it's two separate wheels on a tiltable chassis

@LRBeforeTheInternet 6 ай бұрын

Thats two wheels, James.

@tetronaut88 6 ай бұрын

Aren't these technically two different wheels, making it a bicycle or a Segway type vehicle? Really cool nonetheless!

@TarenGarond 6 ай бұрын

Diwheel is what it's called

@gidi1899 6 ай бұрын

how about a 2-wheel-pendulum (2-pendu)

@XSpamDragonX 6 ай бұрын

@@TarenGarondDicycle

@TarenGarond 6 ай бұрын

@@XSpamDragonX Yeah that is an alternative name, but I think it is usually called Diwheel when the whole contraption is within the borders of the wheel(Especially when not powered by a human).

@AlexandruVoda 5 ай бұрын

they behave more like tank tracks.

@vladimiryan1335 6 ай бұрын

It turned out not to be a monowheel, but a free interpretation of a tracked chassis. Получилось ведь не моноколесо, а вольная интерпритация гусеничного шасси.

@otthh 6 ай бұрын

How is this man able to pump out so many high quality projects? Thank you for all this.

@VEC7ORlt 6 ай бұрын

Ah yes, 'high quality'...

@Zveebo 6 ай бұрын

Having lots of 3D printers!

@shaunstst 6 ай бұрын

Lots of sponsors is how

@computermdms 6 ай бұрын

@@Zveebolots of 3d printers makes is possible but he is still doing a lot of design, coding, integration, and video production for each weekly video

@Zveebo 6 ай бұрын

@@computermdms Sure, but with the huge amount of 3D printing he needs, having multiple fast printers is pretty essential if not to be a bottleneck.

@0hellow797 6 ай бұрын

It’s like a mechanical flat tire, it’s very pretty!

@finndriver1063 6 ай бұрын

Try feet with TPU on the inner edge, and slippery plastic on the outer edge. That way when it leans, it engages extra grip on the driven side but not on the pivot side. That might work, albeit only on slippy floors, and it might slide out of control if you turn without leaning. I do really like the look and function of the pedwheels, they look so steampunky.

@MrSparkefrostie 6 ай бұрын

Had a similar thought, thought thought of TPU on the outer edge

@peterspencer6442 6 ай бұрын

I wonder how it turns if it leans slightly out of the turn, rather than into the turn? It would move the centre of gravity over the faster wheel, I wonder what effect that might have. Awesome work, the jumping motion as it turns looks super cool and gives it a unique Star Wars quirky robot personality :)

@mikosoft 6 ай бұрын

I'd probably tip over more easily

@davydatwood3158 6 ай бұрын

I was wondering this myself. Mikosoft might be right, but the whole point of these projects is to try things and see what happens.

@davidaugustofc2574 6 ай бұрын

The tip over comment might be correct, there's no indication the faster wheel has a lack of grip, so increasing the normal force over it will have no effect. Karts benefit from you leaning to the outside because the inside wheel is always sliding, it contributes nothing to cornering.

@wesleyfilips7052 6 ай бұрын

The legs stuck out spinning on the spot is caused by the legs binding from lateral forces im almost sure. Could be fixed with lubrication of the slot or with rubber bands holding the legs in while theyre coming down so that way the guide pushes them out, rather than relying on its own weight to push the feet back in against the friction of the binding.

@wurstelei1356 6 ай бұрын

I also would have the rods move in a square shape instead of a circle with a tilt. So that each side is similar to the one on the ground. In this case it wouldn't matter if it overdrives on one side. The wheel would just snap to the next square face.

@mrharvest 6 ай бұрын

I think you would get better climbing performance if the center of mass was as low down as possible. Also, the swivel mechanism doesn't work for turning on spot but would help reduce slipping (and therefore wear to road surface) for regular turns as the outside wheel track is longer when turning with two parallel wheels

@MrOliver1312 6 ай бұрын

Almost like a tank.....

@Timestamp_Guy 6 ай бұрын

you should do the maths to make the tilt axis change the speeds of the inner and outer wheel automatically, so you can just steer with the tilt stick and forward. Alternatively, set the tilt amount based on the differential speed of the motors automatically. Either way, it reduces the number of things to adjust independently. Manually controlling both speeds and tilt at the same time seems too much to handle smoothly.

@DigitalJedi 6 ай бұрын

Having it lean out of a turn might also be beneficial, as it puts more of the weight over the faster wheel, hopefully allowing the inner one to slip more easily.

@frogz 6 ай бұрын

now make a vehicle with infinite wheels

@TomS699 6 ай бұрын

And then add one more for good measure

@Alkatross 2 ай бұрын

RIP 3d filament sponsors

@CharlesVanNoland 6 ай бұрын

The left/right leaning should occur automatically via gyro sensor determining if it's falling/leaning one way or the other, to keep it level. Another idea is to have the legged wheels canted, so the tops of the wheels are closer than the bottoms, to make it more stable by default.

@Simple_But_Expensive 6 ай бұрын

What about a guide to force the sliders to lift when in the flat portion of the circle? Bolt it to the center section, and have it reach around the outside of the sliders. Also, to avoid the problem of the feet having too much friction, replace them with bearings. If you can perfect it, I would love to see a ridable full size version. Perhaps a collaboration with Furze or Miranda?

@gearyae 6 ай бұрын

Yeah, I assumed he had those follower bearings riding in a track at first until the stated problem of them not following the cam. That would make a lot more sense.

@nerdlord2288 6 ай бұрын

Always impressed with the mechanical engineering side of your builds,gives me inspiration and ideas for my own hobby builds

@arcotkk 6 ай бұрын

Perhaps adding more weight (that maybe counter-shifts to add friction to the outer wheel as you turn) could help with the leaning, and maybe having the wheels angle toward one another near the top slightly could add some overall balance. Just some theories though.

@vell0cet517 6 ай бұрын

Another clever and fun project! I wish you'd make videos where you live-streamed your design/CAD process and talk through your designs as you create them.

@NerdUndStolzDarauf 6 ай бұрын

That would reveal his dark secret, that he is actually a sentient CAD program in a trench coat.

@lucachacha71 6 ай бұрын

That would be awesome +1

@Eutrofication 6 ай бұрын

it looks surprisingly organic! like it would be a great blueprint for a slime looking robot that has a flat bottom. the move where the flat part goes around in a circle looks like a little emote! the leaning gives it quite a lot of personality too; show this to Adam Savage and his puppeteering mates, and he might just know how to give it life!

@Rockhopper1 6 ай бұрын

to stop the inside wheel mech spinning when stuck have auto ratchet lock into the gear wheel, you can print notches on the spacer, as soon as it detects it will be spinning, a peg shoots out and engages with a notch, stopping the spinning and allowing momentum and inertia to force the carriage forward. If you are clever you do not even need a solenoid or a motor to do this, just a counterweight and lever mech can do this, love this design,

@bluekiwi42nd12 6 ай бұрын

I wonder how it would control if you had the turning command control a mixture of the lean and differential wheel velocity. Probably not useful for sharp low speed turns but could work for smooth higher speed corners. Also I had a wild idea that you could make a large scale version where you are seated in the space in the centre

@willdarling1 6 ай бұрын

+1 ....or just fed from a small acceleromator?

@bluekiwi42nd12 6 ай бұрын

Ya or could use the accelerometer to blend between a low speed tank like turn and high speed lean turn?

@Axolotroll 6 ай бұрын

James just built a biblically accurate angel lol, Im almost expecting that wheel to start saying "be not afraid" randomly

@bowieinc 6 ай бұрын

Super cool. Since the center stays put until it’s stuck, perhaps run a couple bars from the center over the top so if it does get stuck, the top bars would come down and around from the top and give it a push forwards by running it backwards.

@IDisposable 5 ай бұрын

Like a dragster wheelie bar

@JacobPatrick1 5 ай бұрын

I appreciate showing the trial and error. Thank you for showing the real process of development.

@VanillaGorilla7633 2 ай бұрын

This is crazy. Very Impressed with your skills and engineering here! Next level for real.

@RAMII19780529 6 ай бұрын

I'm very impressed by the amount of work, engineering, and time you put into these projects. It's always a pleasure to watch your videos. Thank you for doing what you do!

@SproutyPottedPlant 6 ай бұрын

That colour scheme…the first one with the white feet looks like one of Eggman’s creations! Add a small green and blue part and it would look like E102 Gamma!!

@christophertnugent9100 6 ай бұрын

Can we take a moment to once again marvel at how brilliant James must be to design each of these from top to bottom, plus how diligent he must be in piecing them all together, with a special nod to how great his narration is?

@roguegen5536 6 күн бұрын

I love these quirky little pedrail contraptions

@nevernether3368 6 ай бұрын

Seeing a full sized version would be amazing. Awesome content man

@HolmesHobbies 6 ай бұрын

What delightful projects you make!

@darkhertz7247 5 ай бұрын

Really cool project ! hats off to you man ! Thanks for bringing such things to internet

@rogerdueck9725 6 ай бұрын

That is awesome! Probably the coolest idea on your channel for a while! Would love to see you put a weighted balancing wheel in it so that the middle section doesn't turn around and gets stuck in the grass. And then I would love to see that thing build in real size...plus you can make it a bit wider for more stability

@empmachine 6 ай бұрын

It's really cool when you show us the various fails of the awesome designs you make. Too many makers (well.. I'd call you a "Legit Hard-core Inventor".. but I digress...) only show how the creation works.. and learning from success sucks... Failure, now that's how you really learn, and you totally nail that education (when failure does happen to happen) in a way that resonates with both my inner engineer and artist! Like it was me doing/learning from it with my own hands and brain.. sooo cool! You rock!

@bradwilsey9426 6 ай бұрын

Always fun videos. Thanks for the entertainment. This guys good!

@imacomputer1234 6 ай бұрын

This is awesome! just needs more mass at the bottom. I can see this design functionally becoming a round wheel at high speed.

@abualahadchowdhury2646 6 ай бұрын

A ride in a full size version of that monowheel will definitely give the best merry go round experience ever😁😅😅

@1kreature 6 ай бұрын

The leaning will look awesome you just need to use the same concepts as for cars. Add a bit of mixing from the leaning channel to both motors and steer by only using the leaning stick! It should look awesome and turn much better when you are not trying to do such a small turning circle.

@gregzambo6693 6 ай бұрын

This could have use as a robot vehicle I think, running on roads and paths looks really good. Nice work!

@davydatwood3158 6 ай бұрын

It's worth remembering that most actual tanks can't turn on the spot - the lateral forces cause it to throw a track, so they're mechanically inhibited from even trying. I'd be very curious to see what happened if you took this and put a tall body on top of it, something about 5 foot or so. Kind of along the lines of the waitress droids in Star Wars.

@alexshepherd4469 6 ай бұрын

What do you mean tanks can't turn on the spot? 😂

@davydatwood3158 6 ай бұрын

@@alexshepherd4469 Not sure if you're being serious, but just in case you are: most of the tanks that have existed through the last century would have their tracks come off the wheels if they tried to neutral steer (ie, turn on the spot). So they couldn't. In fact, a lot of tanks didn't even have differential drive - they just braked the track on the side they were trying to turn towards. Now, a *modern* MBT can almost certainly do a neutral steer. But it's mechanically complicated and, if I am remembering The Cheiftain's lessons correctly, still strongly discouraged.

@Abrikosmanden 6 ай бұрын

I really like that one! It's oddly beautiful.

@RupertBruce 6 ай бұрын

About 20 years ago someone asked me to build a self-returning ball. The design was like a spherical version of this but with actuators where you have legs. That is a lot of actuators! Whilst your monowheel legs make it stable, they resist movement. The actuators deform the surface to push the ball along. My ball never returned.

@RupertBruce 6 ай бұрын

@9:40 Mind blown how well that works with passive legs! You make it look easy!

@RupertBruce 6 ай бұрын

Tilting would be good for high speed steering with a small difference in speed for the 2 sides of the monowheel

@JinKee 6 ай бұрын

the wobbly dance would make a wonderful Star Wars astromech

@Madpegasusmax 6 ай бұрын

I really liked this concept , thumbs up

@FranklyPeetoons 6 ай бұрын

This channel routinely awes me for some reason

@GamerWannaB 6 ай бұрын

If you add a tread (similar to a tank) to both of the wheels it might give the friction needed to get out of ditches like you had by gripping the edge of the hole. this would also keep the flat bottom as the tread can be wrapped around and up to make it follow the bearings motion.

@GamerWannaB 6 ай бұрын

im also interested what whould happen if you added more weight to the "drivers seat" and see if that would help with the swivel problem where it tips to far and stops making contact.

@doyouknoedawae 6 ай бұрын

You should make a drivable version of this. Could be some innovation in that

@jamesbruton 6 ай бұрын

I think it might be quite high friction

@doyouknoedawae 6 ай бұрын

@@jamesbruton Oh wow didn't expect you to reply. Nice to meet you, and I want to say that I find you inspiring.♥️ We need more engineers or robotic builders like you 🫡

@MeleeTiger 6 ай бұрын

Would love to see a full size version of the second design, large enough to sit inside of.

@georgeau2523 6 ай бұрын

I have no idea what the application for this could be other than a toy but it looks cool, great work. If you could make the legs a compliant mechanism that is part of the printed wheel you might be able to remove 200 parts

@Huntersky2105 6 ай бұрын

Damn, this got recommended to me quick!

@XxMurvayxX 5 ай бұрын

Each finger should have spring tension inward so that when there’s a divot, the bottom stays flat.

@symply_ajay 5 ай бұрын

My thoughts exactly

@Dendrowen 6 ай бұрын

He looks so happy when he turns on the spot!

@fpvclub7256 6 ай бұрын

Love this thing.. I think the issue is the center of mass. If you could move the center of mass toward the direction you're going and probably bring it lower, I think it would climb and be a bit more stable..

@UbuntuBirdyMovies 6 ай бұрын

A monowheel with two wheels - you're a genius! 🤣 But man, I'm so impressed by your engineering skills! I would even say you're a genius!

@ebonwestbrook5580 6 ай бұрын

This design could be incorporated with hamster ball . Possibly moving outer shell plates

@toordog1753 6 ай бұрын

Where the guide exists in the inner part of the wheel where the point of contact is on the ground, you could add more flexibility by adding an airbag style system to adjust the amount of stiffness or pressure the wheel can absorb on the ground

@liamfay6748 6 ай бұрын

Cool as always!

@UnlimitedScore 5 ай бұрын

Someone took the saying “you can’t reinvent the wheel” to heart…

@jabonet 6 ай бұрын

I have been waiting for a long time to see if you make a robot that can travel thru pipes.

@spbiscotto19r 6 ай бұрын

Really cool! I would switch all the possible weight in a single small point on the bottom part, in order to force it staying stable!

@CollectiveSoftware 6 ай бұрын

This is a good one. It's adorable!

@ImperatorMo 6 ай бұрын

still heckin slick mate, you're the modern da vinci. looking at what you build i can start to imagine the anakin type future garages.

@epicthief 6 ай бұрын

Such a cool concept 😊

@CharveL88 5 ай бұрын

Goes to show that the difference between a cool mechanical oddity and a practical mechanical device is 95% software. Things like the rotation could be fixed by damping the torque when in that mode for example. I love the mechanical ingenuity James puts on display, and it's great stuff! Many, many companies and inventors have come up with similar exercises, but the real hard part is precise algorithmic control, which is why we rarely see concepts like this in many practical applications. I think the next revolution in DIY prototyping ( the last one being able to print and iterate your own parts and plans with a 3D printer) is AI assistance in precision control in the presence of external variables, and the code to implement such algorithms in real time, all at the access of someone who would otherwise not know how to code.

@andreuhlmann8112 6 ай бұрын

Great project!

@Francois_Dupont 6 ай бұрын

i think it is one of your best looking creation yet. it is like an insect.

@KarlLew 6 ай бұрын

When Tron met Segway. Tanks for the vid! ❤

@brennenpatterson7974 6 ай бұрын

You could do some sort of bungie per leg on the wheels that way no matter the speed or orientation they’ll still fit into the gap rather than be gravity based. Love the design! Keep up the good work!

@dylansedillo903 6 ай бұрын

I think if you were to make it ~25% bigger and add a large counterweight to the bottom it would be much better at climbing over obstacles. I wish I had the time and money, you give me so much inspiration to make projects like these

@qazaq25 6 ай бұрын

It probably wouldn't be practical in any way but a mono wheel with a strong enough gyro to allow a driver to be on a seat mounted off the side of it would be kind of cool...

@kurtnelle 6 ай бұрын

This is pertty epic. I think that if you use springs or a cam to pull the feet inwards it might help with getting stuck in a ditch.

@orclev 5 ай бұрын

It might be worth testing out using omni wheel style wheels on the feet. Basically mount rollers on the feet that are aligned perpendicular to wheel (maybe even make them out of flexible TPU). Doing that should still give it good grip when running straight, but would allow slippage when rotating. Another possibility would be Mecanum style wheels, although those are usually mounted in opposing pairs so I'm not sure they'd work out as well in this use case.

@aaro_n 6 ай бұрын

I'd love another video about the controller and how you interface it with so many things.

@bhyre1 5 ай бұрын

It looks like some sort of expansion joint fixed to the flat side of the hub, that applies pressure to the "feet" would help.

@crackedemerald4930 6 ай бұрын

This could make a fun tank design

@SpermanHero 6 ай бұрын

Looks like a quirky Star Wars android, the front cog could be an eye of some sorts. Very cool project!

@getstuk87 6 ай бұрын

as an avid offroader you might be on the cusp of something great. Keep at this one

@ghostAFsky 6 ай бұрын

It's kind of adorable.

@mrwoodandmrtin 6 ай бұрын

Cool! Very interesting idea.

@timvw01 6 ай бұрын

Very cool design

@eelcohoogendoorn8044 6 ай бұрын

I think the leaning would add value at speed with the right control. Ideally youd initiate a turn by leaning, and then as the lean angle ramps up, have it followed by a wheel velocity difference in such a manner to follow an arc with a centrifugal force that keeps equal weight on both wheels, given the lean angle. Just varying the lean angle and wheel speed difference independently from one another certainly isnt going to be ideal. I guess that doesnt solve the problem of zero speed turning though. Its always a bit of a hack with tracked vehicles but it turns out particularly jumpy for a tracked vehicles of these proportions apparently.

@TonyBullard 6 ай бұрын

The best part about it getting stuck and the insides rotating is that the movement of the feet look like it's having a tantrum. Like a dying cockroach on it;s back, or ED-209 falling down the stairs.

@andy_warb 6 ай бұрын

add a couple of glass domes and you have one of those "orb" vehicles from Jurassic World! Another awesome project James!

@piraterubberduck6056 6 ай бұрын

That looks like a lot of fun to play with. Moving the battery weight lower may help a little, or you could give it a wheelie bar.

@SVanHutten 6 ай бұрын

Great concept and build! I may suggest to link all the wheel feet by some sort of rubber tyre (or belt) in a way resembling a tank track (or a flat tyre) . That may reduce the lateral forces acting on the sliding legs when offroading. Or you may get rid of the sliders altogether and drive a belt around a "flat tyre" profile with rollers (by means of a pulley inside a loop on the top).

@meateaw 6 ай бұрын

When you run both engines in opposite directions I suspect the sideways movement of the "feet" get them stuck in their channels. (IE they are pulling horizontally against the track, and get jammed stuck out and then lifts itself up)

@Prophias 6 ай бұрын

for the tilting, you need some sort of actuator to move the center of gravity such that it stays low and in the middle, and doesnt swerve out with the tilt

@christoffkruger 6 ай бұрын

When it gets stuck, the center rotation must extend something to the surface to reengage traction in such scenarios (But that will need some kind of geering to reverse the direction to get traction in the right direction)

@Davedarko 6 ай бұрын

Only James is allowed to call something with two wheels a monowheel :P great project!

@krismanwaring402 6 ай бұрын

I think the spinning on the spot is so cute

@hoppend 6 ай бұрын

I would like to see you put that extra servo to good use in extending an extra wheel at the back. This would greatly help with its offroad capability when needed!

@rocky7gd 6 ай бұрын

What a talented human

@rottenmoonlesbian 5 ай бұрын

lot of ppl commenting on the fact that it has 2 wheels actually gave me an idea for how to make it 1 wheel, make the wheel much wider, and have 2 or 3 rows of feet on that 1 wheel, and then to tilt instead of tilting the sides have a way to tilt the frame inside so that when its tilted to the left the flat section on the bottom makes the left legs go down and the right legs go upand thus using the change in the center of gravity to turn like a normal monowheel but being more stable bc of the flat sections

@mezzanoon 5 ай бұрын

Use angled bearings to get your pivoting idea to work, like the Timken ones often used for truck wheels. Tilting at that moment puts it out of the bearings plane.

@Canoby 5 ай бұрын

Excellent proof of concept- I wonder if you had any ideas for improving performance in grass? And how well this works in something like sand or maybe mud?

@970357ers 6 ай бұрын

Behold, a flat tyre!

@Pystro 6 ай бұрын

For overcoming rough terrain, I think you need both: The ability to swing the center of mass to the forward half of the wheel (that you get in the traditional design), AND the bottom staying flat (that you get with this pedrail design).

@mike-stpr 6 ай бұрын

Вероятно лучшим решением будет полукруглая направляющая -- на ровном покрытии пятно касания будет минимальным, в тоже время на неровном покрытии можно будет двигаться как на гусеницах, сглаживая неровности (не застревая в них). Аналогично для торможения подойдет ровная сторона, в то время как для быстрой езды по асфальту -- полукруглая. Как всегда восхитительно-шикарный ролик! Ваш труд и креатив поразителен! СПАСИБО!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :-)