In general there are two types of bike tires used in motorcycle (bike), one is radial tyre and the other one is normal tyre. The classifications are based on a tire's construction and its features. A radial tyre features transverse radial plies that run perpendicular to the direction of travel. This assures less heat buildup and a softer ride. Moreover, radial tyres are manufactured with the plies laid radially which results in a more flexible tire wall. Bias ply tires are manufactured with the plies laid out diagonally, which causes the walls to not be as flexible.
Tube Vs Tubeless Tyres | Which Tyre Is Better : • Tube Vs Tubeless Tyres...
Why are tires always black : • टायर का रंग हमेशा काला...
STEEL WHEELS vs ALLOY WHEELS : • STEEL WHEELS vs ALLOY ...
Wide Tyres VS Skinny Tyres | Which are best for motorcycle : • Wide Tyres VS Skinny T...
#motorcycle #bike #tyres
Radial Tyres:
In radial tyres the steel belts run at a 90-degree angle with the tread line. It allows the sidewall and the tread of the tyre to function independently. Thus, there is low sidewall flex and more contact with the ground.
Bias Ply Tyres:
In bias ply tyres the nylon belts run at 30 to 45-degree angle with the tread line. The multiple, over lapping rubber plies in these tyres connect the sidewall and tread. The stiff internal construction causes less contact with the ground and may result in overheating.
Pros of Radial Tyres:
1. Runs cooler at highway speeds and under load
2. Steel belts provide tougher construction and higher puncture resistance
3. Uniform contact with the ground provides uniform tread wear
4. Wider footprint of these tyres keeps the vehicle stable
Cons of Radial Tyres:
1. Steel belt construction affects the ride quality adversely
2. Curb impacts can cause sidewall damage
3. Harder tread increases tyre noise
Pros of Bias Ply Tyres:
1. Tougher side walls due to the crosshatch construction
2. Smoother ride on rough surfaces
3. Less expensive than radial tyres
Cons of Bias Ply Tyres:
1. Tread wears faster due to higher traction
2. High rolling resistance can affect fuel economy
3. Roll-over effect causes loss of traction while cornering