Mechatronics Design, ME102B, Prof. Kazerooni, Spring 2014
Пікірлер: 941
@neutral14323 жыл бұрын
That mustache myfriend, what you will never forget. She definitely took marketing 101 class.
@mrsnoop18203 жыл бұрын
@Science and technology no
@alexthedreamer85643 жыл бұрын
@@mrsnoop1820 but he/she said please
@ivoryas16963 жыл бұрын
neutral1453 I'll never forget it... -because it made the bot cuter and creepier at the same time-
@ubaid13284 ай бұрын
I want this project report
@jxdigital3 жыл бұрын
This was 6 years ago, and that shows amazingly well. It’s interesting to see how much of this stuff is now very common. Not only in consumer products, but also in electronics as off-the-shelf miniaturized low priced modules. Those can do a lot of the ideas presented here, but in a much more refined way. It’s good to see the progress that has been made for the past 6 years! Still, they were nice and fun projects and the students must have learned a lot by making them! 👍🏼
@kunjupulla2 жыл бұрын
The objective of these projects are so that the students will get a hands on experience of how things should be done.
@MrPlaiedes3 жыл бұрын
Guy: this here tracks the motion with the laser sight. Application: military
@eliasenns49283 жыл бұрын
@Science and technology no
@ifocus12793 жыл бұрын
Lol
@manp10393 жыл бұрын
i thought that was the best project. cud also be used by law enforcement . that device might be useful for tracking high speed small drones.. and perhaps using laser or microwaves or? to disable the drone in flight?
@bluedaylight12433 жыл бұрын
@@manp1039 that one is usefull for military purposes, but i like the girl who make 3d scanning in the last one. Its pretty usefull too
@javazao3 жыл бұрын
Lol, I thought the same
@mannyquinn90313 жыл бұрын
That wheel chair was dope ,common that's worth an ovation
@jatinbatra40453 жыл бұрын
i really like the interface. Instead of a joystick we have traditional controls with less hassle. Plus the normal wheelchair can be converted
@parkerking64103 жыл бұрын
I’ve seen a few people in wheelchairs using something like this. Don’t know if these students were the ones to make them, but it’s become a product.
@pagnag43883 жыл бұрын
unfortunatly not a standing ovation
@allahm-ast3mnlywlatstbdlny1643 жыл бұрын
Mashallah tbark Allah alhamudillah inshallah better astgfrallah
@AtharvP072 жыл бұрын
Genuine question though, once the motors are activated and the chair goes forward with speed, how would you control it if some sudden obstacle comes in the way? Would be difficult to stop the motion with ease I suppose.?
@priyanksisodia58893 жыл бұрын
combining all projects will give us a working ironman
@doraemongaming40103 жыл бұрын
Right bro
@Grevlain3 жыл бұрын
Or a working Terminator.
@jinxproid7753 жыл бұрын
Odading
@alexthedreamer85643 жыл бұрын
@Big One why not ?
@hunl.9193 жыл бұрын
Emergence of Mr. Simpleton
@Maxxplayne4 жыл бұрын
Self leveling tripod is the project that I loved the most. I would love to buy that.
@wanderingmanz3 жыл бұрын
Me too. You R right as this project is pretty much a product for everyone now a days.
@balancingpancakes97563 жыл бұрын
I think that a gimbal in a tripod ?
@gmr2gnr3 жыл бұрын
We have camera gimbal now.
@ScrotN3 жыл бұрын
No you won’t
@genxstar3 жыл бұрын
That's pretty basic use of accelerometer or gyroscope
@acileniomi46753 жыл бұрын
I appreciate how much time and dedication they put into their project. *Mecha Heroes!*
@koalabrows67556 жыл бұрын
Do you also have to wear a mustache to control Fido
@tudorarthur58874 жыл бұрын
Yes, the mustache is passed down from generation to generation to control and contain his powers.
@CSSuccessGamer4 жыл бұрын
yes
@perceptrongaming42903 жыл бұрын
@@tudorarthur5887 omg lol
@highwayoflife39873 жыл бұрын
Dat ws wonderful...nice presenter
@KK-gc5lj3 жыл бұрын
Yeah the sensors are installed in the moustache.
@mightydeathlash28677 жыл бұрын
This looks like the Professional Practice Program aka Senior Design Project that all undergraduate students participate in when most or all engineering curriculum courses are fulfilled. Amazing!!
@DiegoRodriguezNava3 жыл бұрын
I'm a Mechanical Engineer and I love, When I went to school I didn't have this class, but i will take it with online materials. Keep doing a great job
@maccarinaferriro13783 жыл бұрын
i never thought of collage projects would be like this. you guys are amazing
@smailbarkouch8313 жыл бұрын
It's crazy. I've seen this video so many times during middle school and I am already a senior in high school. This video influenced me a lot, and even though I am not going to pursue mechatronics or mechanical (i'm doing cs), this video motivated me to pursue something to do with electronics.
@anapaola72413 жыл бұрын
This video is inspiring me to regain confidence I’m my career choice. I want to feel and BE an engineer. Programming came up as fun and enjoyable, I’m only on the surface tho, hope you like it, keep me updated! ^_^
@ceoofpoonis36683 жыл бұрын
Counter strike
@moisesrodriguez98022 жыл бұрын
i wasnt sure what to study, although i was already thinking about Mechatronics, but i was not sure, i had the feeling that i couldnt do it. Now I see this and I finally realize that if they could, I can too. like, look fido, it's simple but really interesting. ofc, i'm nervous asf lol
@nalediwhite12712 жыл бұрын
4th time watching
@sithrice832 жыл бұрын
I can't believe how amazing all of these ideas and projects were. And this was in 2014 bro. Can you imagine how much those people improved or even just had fun with all this? This is a great video that I wish touched more peoples home page
@aahmadiii7 жыл бұрын
that last idea is amazing!!
@TheCinderDude3 жыл бұрын
It’s crazy for me to think that this was 7 years ago. I was 11. Now I’m coming out of highschool after being on a robotics team and learning to code and finding a million uses for a raspberry pi around my house, realizing how I experienced some of these as they came into the market. The camera gimbal is my favorite, I study film on in my free time and now a lot of gimbals have the ability to do motion tracking very accurately.
@nmg19093 жыл бұрын
I love artificial intelligence and robotic system but have no idea where to start. Love you guys making an impact to improve the face of technology in a different dimension.
@neolightsoul9 жыл бұрын
Mechatronics Rocks!
@userfibonnachi3 жыл бұрын
@Science and technology No
@courageouscuber92782 жыл бұрын
@@userfibonnachi Lol
@oisinbk6003 жыл бұрын
I love this video. Its like the scene in big hero 6 where hero goes to his brother's lab and sees all those crazy inventions
@hansikabagga3 жыл бұрын
Ikr,so awesome
@Shubham_pandey-nk1un3 жыл бұрын
These projects are just amazings. This gives me an inspiration to do Engineering
@wasalrasool47742 жыл бұрын
Watching in 2021, 7 years back these people build these things and I still figuring out how to blink led in arduino. Well done
@Shinyflubba3 жыл бұрын
That 3D scanner/printer at the end was cool, worth the wait
@Sathiyakumar33 жыл бұрын
I completed my engineering degree 8 years ago. Back then I was very much enthusiastic and full of dreams just like these students. Now I have to do sell engineered products, for living. As a guy from a third world country, I guess marketing or ecommerce is what I should have learned. I hope at least these guys have found the best out of these innovations.
@ktv99993 жыл бұрын
What have been invented? To save nature and our planet?
@Sathiyakumar33 жыл бұрын
@@ktv9999 I showcased a energy conservation automation concept for street lamps. Long time back.
@Segmentsoflives3 жыл бұрын
Nice project catalog. You guys did a wonderful ground work for next startup.
@gouthamsh12 жыл бұрын
They all did great jobs!!! This reminded me of my college days when I did something similar.
@uditraj57292 жыл бұрын
Which college bro :)
@SoCalFreelance4 жыл бұрын
Come on! The one guy just repurposed his Iron Man cosplay for his school project.
@TommytheroxTV4 жыл бұрын
It was kinda badass tho ngl
@sumamerican94363 жыл бұрын
Science and technology no
@joannot67063 жыл бұрын
Or he managed to make his cosplay during school time. Either way he got plenty of smart.
@77Avadon772 жыл бұрын
The best lead in for these young students is to find something that they like and try to apply what they've learned to it. You're not going to be very long in this career if you're not doing something that you enjoy
@xToTaLBoReDoMx9 жыл бұрын
What year are these people in? Dam they're well funded.
@ameeny33899 жыл бұрын
xToTaLBoReDoMx 4th year undergrads.
@mytechexplanations69234 жыл бұрын
Final year I think ..
@essaquadry3 жыл бұрын
Most of the times these projects are not funded in undergrad
@zebruhmlz88013 жыл бұрын
Ameen Y are you sure it’s 4th year? It says ME102B, the “1” denoting first year (I thought at least)
@kaiwenhe46773 жыл бұрын
@@zebruhmlz8801 No, classes numbered in the hundreds mean upper division classes. So one would expect these students to have been in their third or fourth year.
@glebbobrakov92383 жыл бұрын
The first one is by far my favorite, lot's of practical use :)
@AhmedSajawal5 жыл бұрын
Enjoyed every single second
@richardswaby29375 жыл бұрын
Having a creative mind and ideas to make your dream into reality
@diegowaahere5 жыл бұрын
someone made a sentry gun lazer lmaooo and they are talking about tracking particles 😂
@malimeefr4 жыл бұрын
when he said it has many uses I was like yeah like tracking people and killing them
@seven42804 жыл бұрын
@@malimeefr there's a video on youtube,the made a super effective mosquito killer with that
@nilaksh0073 жыл бұрын
@@seven4280 that would be a hazard to eyes
@seven42803 жыл бұрын
@@nilaksh007 yeah ,that was the first thing I thought too
@JacobianMatrix93 жыл бұрын
If the purpose wasnt to kill people, then he would have moved a mirror to track objects, he wouldnt move the whole laser assembly. He s def gonna mount a gun on that thing :D Cool project!
@WiseLuck1173 жыл бұрын
I can watch these all day.
@dionbridger59443 жыл бұрын
That power assisted wheelchair is really good.
@parkerking64103 жыл бұрын
They are a real product I’ve seen people in wheelchairs use. Not sure if the students here took their project further or not.
@TheRussianhippie3 жыл бұрын
I'm so jealous of universities like this, when I was in undergrad people usually constructed their projects out of cardboard and were lucky if they worked for the entire length of the demo. 3D printed parts? well thought out design followed through from the initial stages? maybe one or two.
@salman.qureshi3 жыл бұрын
11:42 "The Android phone has an Android App on it..." It's Big Brain time.
@drakoky68943 жыл бұрын
Could be an web app
@lioscar803 жыл бұрын
The floor here is made out of floor
@jerinantony76953 жыл бұрын
Almost killed me
@jerinantony76953 жыл бұрын
@@lioscar80 im dead
@Elgatooo13 жыл бұрын
THE MORE U KNOW
@Meowface.2 жыл бұрын
Fantastic projects everyone ! I had application ideas for nearly every one of them
@DeepakSharma-mb2mj3 жыл бұрын
I liked the auto gear shift! Very useful!
@andrrrrew21xD8 жыл бұрын
The gopro dude project was awesome!! could you imagine that?
@Vambanbro3 жыл бұрын
Now it's mass produced
@ZerofeverOfficial3 жыл бұрын
4:04 Disney Star Wars: "I'll take that"
@johnacts39753 жыл бұрын
Fido was acquired by Disney's Star Wars
@lioscar803 жыл бұрын
Jurassic world pods
@yoshimitsu43 жыл бұрын
That's the droid i'm looking for
@whitebeltforlife3 жыл бұрын
Thanks, you bright young things because now in 2020 these things are easier for us hobbyists to achieve.
@abubakrjajja3 жыл бұрын
Am I the only one who is watching and Enjoying these projects in 2021 ???
@heaven42473 жыл бұрын
I love living in the Loop ! We can do anything !
@vimukthimadhusanka48063 жыл бұрын
That speherical robot is the best. The hardest motion ever that can model
@damny0utoobe3 жыл бұрын
Love these Mecha projects 😍
@ntandodube43503 жыл бұрын
Really cool projects. Well done guys.
@thefbisurveillanceteam21325 жыл бұрын
1:43, that girl looks like Mike from Stranger Things...
@selmankurt3 жыл бұрын
@@clairew1928 thats you 😍
@harishussain7643 жыл бұрын
It is
@timewalker66543 жыл бұрын
Lol thats true
@meharthakur12523 жыл бұрын
But she was cute🤗
@kirati3 жыл бұрын
She is cute.
@dentonfender6492 Жыл бұрын
I like your "Fido" robot. I built something similar in the 90's, but it was less sophisticated. To balance it I built a small gyroscope placed on the four wheeled rover like vehicle that drove within the hamster sphere, and was radio controlled. It wasn't perfect, because my home-made gyroscope needed some kind of speed control to respond to various forward, and backward turns made from the RC operator.
@internetowl88662 жыл бұрын
These students are the coolest 🧡💥
@gecgec34093 жыл бұрын
Wow. I keep coming back to this video
@ahmedelaraby76563 жыл бұрын
Can I transfer to your uni? You guys seem to be having lots of fun, and passionate about your studies
@NvTwist3 жыл бұрын
I already created the “food printer” for Pizza Hut, toss pan with dough on top, 3 grabbers slide to center and grabs pan to secure it and to gather size of pizza, turn table would spin and dispenser will spray the oil & sauce onto the dough evenly from the center out. Pretty proud of the unit.
@Miraclesylva Жыл бұрын
What really ??
@Miraclesylva Жыл бұрын
Can I see
@krioulai Жыл бұрын
I was searching for this video just a week or so ago, Thanks yt recomedations
@odairdomingues59313 жыл бұрын
Gostei da moça de bigode ecrã idéia da bola , ficou irado 👏👏👏👏
@diegowaahere5 жыл бұрын
when it comes to application of these technologies these ideas are "interesting" to say the least
@davidnunez49323 жыл бұрын
6 years later I can buy all this things on Amazon
@Happymorkie7 жыл бұрын
mechanical engineer is my passion , bekeley as well so i hope that you have more video !!
@vanshbharadwaj98293 жыл бұрын
These students are the future of the world.
@Nav05753 жыл бұрын
Projects in our college r like... blinking led, hello word 🤣
@NightVisionOfficial3 жыл бұрын
11:31 : I want to be the girl on the "car" if i had to do a presentation xD
@Shubham_pandey-nk1un3 жыл бұрын
@Science and technology Subscribed your channel
@ifocus12793 жыл бұрын
Lol
@sato4kaiba5 жыл бұрын
Nice innovative work all of you. Good job
@baotran76263 жыл бұрын
Woa! It's amazing I love all projects
@alexanderle16103 жыл бұрын
3:28 The cutest thing ever
@AvantGrade5 жыл бұрын
5:58 the most reliable so far
@yaribrocha16632 жыл бұрын
I loved the robot at the begging, simply awesome !
@selfanalysishari20693 жыл бұрын
Awesome 👍 Projects .... Guys.. I'm too Mechatronics Engineer... Education system is very much important for the development of students... You guys are really blessed because ur not borned in India... All the things are good here Except education system... I'm really happy to see your projects .... But I'm too late ...
@vid_sh_itsme43403 жыл бұрын
True that... education in India sucks unless you are from tier 1 college. We know how we used to make our final year project. And all the projects in this video are not even difficult to make. Just a proper guidance is what is required. Well it's student mistake too. After all ik hath see taali nhi bajti
@pigeondamigion5692 жыл бұрын
"I created a revolutionary 3d printer that has an order of a magnitude higher resolution than anything found today on the market" "uhh so here's my desktop greenhouse"
@kassablaith64312 жыл бұрын
Gold☠️☠️☠️
@dougharriman7 жыл бұрын
Cool mechatronics projects from Prof. Kazerooni's mechatronics class at Cal. Go Bears!
@KJ7JHN3 жыл бұрын
a long time ago, I had one of these (ME102B)ish. It was so neat.
@amitdeshmukh96603 жыл бұрын
Loved all projects....❣️
@thakuratharva25613 жыл бұрын
University kids at California : creating mechanical projects University kids in India : solving hc verma , cengage , N avasthi problems . :((((😒😒
@anupamsaha82753 жыл бұрын
Isn't HC Verma meant for high school kids?
@nimitzzzz20843 жыл бұрын
Lol xddd 😆 ja ke questions solve kar phir inki company me kam mil jaye ga😆
@deepakmecheri46683 жыл бұрын
I don't know man. I've seen pretty cool projects getting done in lots of Indian colleges nowadays. But sure, we do have a lot more room for improvement.
@MahendraPatil-rw3fe3 жыл бұрын
If you think so, Then you have to visit a better Indian project exhibition
@thesidd193 жыл бұрын
Nope
@utsavanand5663 жыл бұрын
5:08 : you can attach it to a quadcopter DJI : ummm, okay!
@brixtervillaruel2 жыл бұрын
10:45 this guys invention as well looked like something from DJI
@JandCanO3 жыл бұрын
I loved the bicycle one!
@tired_brickmason347 жыл бұрын
the guy at 7:20 looks like he plays yu gi yo for a full time job.
@Pogohontas.4 жыл бұрын
But he looks even more like Omar Isuf (look him up on KZfaq to be blown away)
@JaydenLawson3 жыл бұрын
10:16 GoPro Karma Grip right there, which was released a year later
@supreetpradhan66843 жыл бұрын
All the projects are pretty cool.
@carlosim97852 жыл бұрын
God I love the confidence of that distinguished gentleman known as Fido
@11111jaka3 жыл бұрын
1:40 we all know what plant cheers us up :) the micro weed box for dorms student homes and lonly stoners
@tonycui68915 жыл бұрын
I feel that I'm literally stupid after watching this tech exhibition...
@badr68963 жыл бұрын
Maybe we are
@ifigetbannedagainyoutubeis20182 жыл бұрын
It's mostly electronics why do they even call it mechatronics?
@badr68962 жыл бұрын
@@ifigetbannedagainyoutubeis2018 cuz it's a machine that works with electric energy
@martinn.60822 жыл бұрын
Me too, and my final project was a robot arm that played checkers with a webcam on an empty board where users pointed where to move the pieces and saw the virtual board on the screen. So many days at the lab and the software is soooo bad in hindsight. We actually wrote our own TCP server in python that isn’t even asynchronous, lol. It was strictly request-response. I believe you just feel dumb because any sufficiently advanced thing overpowers your brain, but if you break it down into the details, it’s not that hard. And you don’t see all the terrible, hacked together components inside, haha
@badr68962 жыл бұрын
@@martinn.6082 yeah you're right. then that makes us lazy , hmm even worse
@raybison55473 жыл бұрын
Great projects, keep up the efforts
@guru_teja3 жыл бұрын
I wonder and would love to see what kind of projects are being done in 2021 these days
@stevebijujohn51533 жыл бұрын
Only if my university funded my ME department really well! We would have had good projects!
@2024comingforyou3 жыл бұрын
2:13 girl is love
@hasnatsakib72233 жыл бұрын
Just by watching I learned many ideas and bg mixing many more ideas hit me.
@kartheekvajrala24872 жыл бұрын
7 years ago and still amazed
@TDhoedo8 жыл бұрын
Dat growhouse
@garystinten93395 жыл бұрын
Skynet chyeah. be growing crops son.. also she could get into home growers that are controlled by an app.
@stefanpapp42373 жыл бұрын
Why do i feel stupid after watching this.
@jorgelabrador43903 жыл бұрын
That's cool invention.Love it!
@alexispariona74363 жыл бұрын
I've never seen female students in my class. This Is amazing and very interesanting projects
@imstupidbut16034 жыл бұрын
6:08 is iron man helmet
@jay-rathod-013 жыл бұрын
How the heck do they make industry ready models?! 🤩
@chris_louis3 жыл бұрын
It was cool, each one of them, just out of curiosity all of it is great.
@ai.simplified..3 жыл бұрын
Very inspiring & lovely video Make my day
@PUNEETAM203 жыл бұрын
That mustache caught me off guatd
@rapeticharan26033 жыл бұрын
and these projects are 6 years ago!!!
@anti-matter58743 жыл бұрын
All of this have great potential
@sergiocruz30613 жыл бұрын
Great kids with great minds. ☺️👌
@supercobrapro74703 жыл бұрын
1:55 fresh homegrown weed
@stephanieramirez22486 жыл бұрын
Does anyone else think the greenhouse girl looks like the female version of Mike from Stranger things?
@Paul_Walker6 жыл бұрын
Stephanie Ramírez hahaha I'm LoL
@ameliabuns405810 ай бұрын
the mustache caught me of guard. wish my uni was this fun. oh well I pretty much quit anyways!
@masonsebastaincomedy2 жыл бұрын
The guy with the Gyroscope for cameras and phones is a millionaire now guaranteed 👌🏻 and the guy with the "quad-copter" definitely perfected it into drones!