Mechine Technology III lesson 13 Using a Steady Rest and Follower rest to Machine on the Lathe
Рет қаралды 67,470
Күн бұрын
@danl.4743 6 жыл бұрын
These are the best videos out there.
@joewhitney4097 2 жыл бұрын
Great educational video. Thanks for sharing.
@millomweb 4 жыл бұрын
What did I learn ? - 1. that steadies (either fixed steady or travelling steady) can come with roller tips, and 2. 'cat's head' - not seen or heard of those before despite being aware of 'cat's paws' for boring operations. As for putting paper between fixed steady and the bed, I'd disagree with. Apart from cleaning the bed (& lubing) before placing the fixed steady on it, I'd slide the fixed steady back and forth to ensure it was cleanly down to the bed and not resting on anything in between. Paper can only add sponginess to the mounting although only slight !
@dizzolve Жыл бұрын
doesn't matter much because the jaws can be adjusted to the work piece with or without paper. I was taken aback myself when I saw him doing that though. Never knew that was procedure. This would protect the ways from any wear in addition to ........ what he said -slipping. I have some trouble seeing a steady rest 'slipping' but I'm certainly no authority
@WeldNotes 3 жыл бұрын
That rag though! 😳
@janvisser2223 Жыл бұрын
As they used to say: the world turns on Colchester lathes.
@temmycandrawijaya 3 жыл бұрын
Very good tutorial video
@mdmforever5021 6 жыл бұрын
அருமை
@markl1604 2 жыл бұрын
Always looks better if machine is spelt right. Otherwise the first lot of information looks bad.
@smiller509 6 жыл бұрын
mechine is spelled machine
@steveh8724 5 жыл бұрын
No, mechine is spelled mechine. However machine is indeed spelled machine.
Topper Machine LLC
Рет қаралды 43 М.
College Machinist
Рет қаралды 27 М.
Museum of Our Industrial Heritage
Рет қаралды 424 М.
College Machinist
Рет қаралды 10 М.
College Machinist
Рет қаралды 15 М.