0:13 looked so good!!!! THANK YOU FOR THE TUTORIAL!
@MediaWayUKLtd2 жыл бұрын
Thanks Froggo!! I spent an entire day on that part of the video! Glad you liked it!
@Wclipped2 жыл бұрын
1000 times thank you for also explaining the curves in blender
@MediaWayUKLtd2 жыл бұрын
No problem! Glad you found it useful!!
@coolabhinishu2 жыл бұрын
Your tutorials are easy and very helpful keep sharing the good work lots of best wishes from my side, thank you
@MediaWayUKLtd2 жыл бұрын
Thank you Abhishek Verma! I appreciate your comment!
@DJMATRIXVIDEOBLENDZ2 жыл бұрын
This was not only helpful but gave me the motivation I needed I was gonna give up till this. Thank you very much sir subbed!
@MediaWayUKLtd2 жыл бұрын
Thanks for the sub! Keep going! Blender gets easier the more you do!!
@karann_sx2 жыл бұрын
Make a tutorial on how to add some smoke while drifting or dust particles driving driving off-road .
@MediaWayUKLtd2 жыл бұрын
It's on my list of future tutorials! Thanks Karan!
@Solo_Studio_ Жыл бұрын
Just add a smoke simulation to the wheels
@manavjaison2 жыл бұрын
Absolute Class Tutorial !! Will definitely be trying this out !! :)
@MediaWayUKLtd2 жыл бұрын
Thanks so much Manav Jaison! Glad you enjoyed it!!
@petrinio82 жыл бұрын
Hey Nice! If you remember me from the rigacar tutorial i am petrinio8. Cant wait for the Video!!
@MediaWayUKLtd2 жыл бұрын
Hello again Peter! Yes I remember you! This tutorial follows on from the Rigacar tutorial - let me know if you enjoy it?
@petrinio82 жыл бұрын
@@MediaWayUKLtd Yeah i enjoyed!I hope everyone see it! Btw can u make a tutorial in render? because i cant understand the render style.
@AlphaGamer1981 Жыл бұрын
another way to stop your car slowing down without going into graph editor is to select the end frame, right click, select interpolate frame and select linear. However i have found out that in blender 3.3 by setting the ground sensors, it pushes your axies and wheels under the plane
@MediaWayUKLtd Жыл бұрын
Great tip! Alternatively, hover over the timeline and press T.
@turkiabdelatif3932 Жыл бұрын
Great work sir keep going post tutorials like that i appreciate,
@MediaWayUKLtd Жыл бұрын
You're very welcome!!
@peterpmd Жыл бұрын
Thank you very much.
@MediaWayUKLtd Жыл бұрын
You are welcome!
@DragaoNinja2 жыл бұрын
Nice.
@MediaWayUKLtd2 жыл бұрын
Thank you! Cheers!
@ThePascalbriand2 жыл бұрын
Good job once again
@MediaWayUKLtd2 жыл бұрын
Thanks Pascal!! Appreciate that!
@AvengeOn2 жыл бұрын
This looks fabulous.. will definintely try this out! This is just 🔥
@MediaWayUKLtd2 жыл бұрын
Thanks Avenge-On!! Have fun!
@halimseidou46472 жыл бұрын
Can't wait for it.
@MediaWayUKLtd2 жыл бұрын
Thanks Halim! Not long to go!!
@user-qv4du8hj3t Жыл бұрын
keep going the good work sir. Really helpful thanks😇
@MediaWayUKLtd Жыл бұрын
Always welcome! 😀😀
@karthikeyan-bl2yh2 жыл бұрын
Eagerly waiting⏳⏳⏳⏳
@MediaWayUKLtd2 жыл бұрын
Hi Karthi! Great to see you here again! Hope you enjoy this new one!!
@karthikeyan-bl2yh2 жыл бұрын
@@MediaWayUKLtd Great👍
@MediaWayUKLtd2 жыл бұрын
@@karthikeyan-bl2yh Thank you!!
@geffeniz2 жыл бұрын
fantastic...day made
@MediaWayUKLtd2 жыл бұрын
Great to hear Stephen!! Appreciate you leaving a comment!!
@digitaldesigning54822 жыл бұрын
Thank you for the tutorial.But i want to see the camera setup video and light setup video of yours
@MediaWayUKLtd2 жыл бұрын
Check out my greenscreen tutorial - should answer most of your questions!
@manavjaison2 жыл бұрын
Excited !! :D
@MediaWayUKLtd2 жыл бұрын
Hey Manav Jaison! Not long to go now! Hope you enjoy it!!
@laurelhendrix10362 жыл бұрын
That vfx intro was super cool😎😎 Great tutorial as usual🤗🤗 How did you switch cameras in the rendered output? Like render each cam footage separately and combine them or is there an option to do that in a single render Also how did you make that camera shake? That looked so real as if someone had a handheld cam...
@MediaWayUKLtd2 жыл бұрын
Thanks Laurel!! The intro took me a while! The answer to both your questions is in my camera tutorial video! Enjoy! kzfaq.info/get/bejne/q5iUnaR93dOto5s.html
@laurelhendrix10362 жыл бұрын
@@MediaWayUKLtd Thanks a lot!👍👍 I'm checking it out...
@AltayebAmer2 жыл бұрын
just perfect. thanks
@MediaWayUKLtd2 жыл бұрын
You're welcome Alt Amer! Thanks for commenting!!
@linestyydanial43042 жыл бұрын
i can wait for it
@MediaWayUKLtd2 жыл бұрын
Thanks linestyy danial - only 4 hours to go!!
@skyjoanimtion Жыл бұрын
cool
@MediaWayUKLtd Жыл бұрын
Thanks so much!!
@acnimatorstudio74872 жыл бұрын
Good
@MediaWayUKLtd2 жыл бұрын
Thanks ACNIMATOR STUDIO!
@rehan47832 жыл бұрын
so coooooooooooool!!!!!!!
@MediaWayUKLtd2 жыл бұрын
Thanks Rehan!!
@Freefx_072 жыл бұрын
amazing
@MediaWayUKLtd2 жыл бұрын
Thank you MycreativeFx! Cheers!
@dulnethsenuka2 жыл бұрын
You are the best👍👍
@MediaWayUKLtd2 жыл бұрын
Haha! Many thanks! :-)
@anybodyk3524 Жыл бұрын
Can you give a tutorial about how to add smokes while drifting?
@MediaWayUKLtd Жыл бұрын
Great idea! I'll add that to my list of future videos!
@begalooloo2 жыл бұрын
thankyou ....
@MediaWayUKLtd2 жыл бұрын
You're welcome Vicky 😊
@aasthapandey51622 жыл бұрын
Sir , how you changed colour of the car
@MediaWayUKLtd2 жыл бұрын
Go to the materials editor, and change the color in the base color section.
@aasthapandey51622 жыл бұрын
Thank you sir 😊😊
@fantasyzoneproduction7712 жыл бұрын
Can you please do a tutorial , for green screen and how you put your self in the frame with details ?
@MediaWayUKLtd2 жыл бұрын
Check out the green screen tutorial on my channel - it's the same steps on that video.
@majorbangz2 жыл бұрын
Awesome! Tutorial sir. How did I add your self to the scene?
@MediaWayUKLtd2 жыл бұрын
Thanks MajorBangz! Filmed myself on a green screen. Added myself as an image on a plane. Nothing to tricky!
@Erunanethiel Жыл бұрын
Is the "procedural 2 lane road profile" not on blender kit anymore? What can I use instead?
@MediaWayUKLtd Жыл бұрын
Hi! I've just checked, and it's still there. Just search for road, and it's a few results in.
@gogoRetro9142 жыл бұрын
Another great tutorial, but the most important thing missing in my opinion is how did you create the most basic path first, please?
@MediaWayUKLtd2 жыл бұрын
Hi Josie! This is part 2 of a 2 part tutorial! Check out part 1 here: kzfaq.info/get/bejne/oLp4adOkztKtqKM.html
@gogoRetro9142 жыл бұрын
@@MediaWayUKLtd Oops! Oh yes, thankyou so much.
@panchovalenzuela51122 жыл бұрын
Please increase the font size of blender in your next video. I'm shortsighted ...
@MediaWayUKLtd2 жыл бұрын
No problem Pancho!! Thanks!
@TDJ69492 жыл бұрын
Haaa only 34 minutes super iam exiting for this video
@MediaWayUKLtd2 жыл бұрын
Thanks D.S.F. CHANNEL - hope you like it!!
@TDJ69492 жыл бұрын
Yeh yes I like this video so much 👌👌👌👌
@ZuluZizo Жыл бұрын
I have question: I have a rigged car, the "Base" [in Pose Mode] has a "Follow Path" Bone Constraint and is following a BezierCurve. The problem; When I change the vertical elevation of a vertex on the BezierCurve (to add a ramp animation), the car will rotate for unknown reason. How can I fix this issue (unless this is not specific enough?)? Will I need to keyframe the car's rotation to counter the effect? Thanks. Sorry for the bad English.
@MediaWayUKLtd Жыл бұрын
Hi Zulu Zizo. I'm not sure if the Rig a Car add on supports changes in elevation. Make sure you're using the latest version: github.com/digicreatures/rigacar/releases and check out their help videos: digicreatures.net/articles/rigacar.html
@basejumperdx45732 жыл бұрын
Could you do smoke tyre simulation while drifting
@MediaWayUKLtd2 жыл бұрын
Hi m3Dtm Lizard! I looked into this a lot! However, I couldn't find an easy solution that I could teach in a tutorial. All my methods were taking over an hour to teach! So I didn't think it would make a good tutorial. Maybe in the future.
@cutz32 жыл бұрын
My rig a car is not working. Its not showing after i enabled it
@MediaWayUKLtd2 жыл бұрын
Hi Bryxn. I'm not sure about that - are you using the latest versions of Blender and rigacar?
@myandroid32012 жыл бұрын
Hey ...I am have difficulty in laying car curve over the roadshape ...my tires are either digging in or are in the air now and then on the road...plss help ....
@MediaWayUKLtd2 жыл бұрын
Sounds like your motion path is not flat. Go through the points of the curve, and see what the z position is. I think you can select them all, press S to scale, then Z for Z axis, and finally 0 (zero) to reset them all on the Z axis. Hope that helps!
@armedia666 Жыл бұрын
Hai Sir From where did you get the sound effects
@MediaWayUKLtd Жыл бұрын
Hello!! Sound effects are from Artlist.io - should be a link in the description?
@anandhunandhu97202 ай бұрын
Bro can you tell me how to render animations fastly within 2 hr my 15 sec video is taking 1 day of rendering time plzz help me
@MediaWayUKLtdАй бұрын
Render at a lower resolution, and with less samples.
@mohammedakheelali2392 жыл бұрын
hey, it would be helpful if you would show how to set up nodes and explain about it!
@MediaWayUKLtd2 жыл бұрын
Hi Mohammed! Are you talking about material nodes, or geometry nodes?
@mohammedakheelali2392 жыл бұрын
@@MediaWayUKLtd compositing nodes, iam kinda new to blender.
@PriyankaGupta-tu8ms Жыл бұрын
After adding hdri whole world gets pink pink ... Whwt should i do
@MediaWayUKLtd Жыл бұрын
If the world goes pink, that usually means that Blender has not linked to the HDRI properly. Try linking it again? Or go through relinking the file. Hope that helps!
@casuffacommeci2 жыл бұрын
Thank you very much for this tutorial. I'm trying to animate a car with camber. But because of the camber, even tilting the manipulators parallel to the wheels, they continue to rotate along a horizontal axis. Is there a solution to modify the axis of rotation of the manipulators so that the wheels rotate correctly? Thanks
@MediaWayUKLtd2 жыл бұрын
Replied on the other video.
@user-sb9iv4gj7q Жыл бұрын
Can you please make an animation for my car also please in blender because my system doesn't suppport blender please
@MediaWayUKLtd Жыл бұрын
What system do you have? Blender works on PC and Mac?
@user-sb9iv4gj7q Жыл бұрын
I am having laptop@@MediaWayUKLtd
@Kloquewerks2 жыл бұрын
Did anyone actually follow this? When I use to "procedural 2 lane road profile" I can't tab into edit mode. There isn't even option for edit mode when I clickon the road
@MediaWayUKLtd2 жыл бұрын
Hey R S. When you import from BlenderKit, you need to make sure import settings are set to append, and not link. Then you'll be able to edit the model.
@Kloquewerks2 жыл бұрын
@@MediaWayUKLtd Yes sir that's what I did. I just tried again to double check. Still not letting me do anything in edit mode. There is also no HDRI option for me either. So I can't add a background. Maybe I've done something wrong :/
@MediaWayUKLtd2 жыл бұрын
OK... So open a new empty Blender file. Import the road from Blenderkit. Click the road, so it has an orange line around it. Press TAB to go into edit mode. You should see the black dots of the vertices at one end of the road. Click and drag around the vertices on one side of the road, press G to grab and see if you can move them. Does that help?
@pandharinathlahane70382 жыл бұрын
Mediaway please make a video on how to make a car
@MediaWayUKLtd2 жыл бұрын
Hey Pandharinath Lahane! Thanks for your comment! I'll add it to my list of video ideas!
@eazisurvival14902 жыл бұрын
Hi Sir, Please How Did You Get The Front/Taillights? Mine only shows in solid mode But doesn't show in both material/render mode. Help Please 🙏
@MediaWayUKLtd2 жыл бұрын
You'll need to adjust the light material in the shader editor. Increase the emission strength. It will only show in cycles. Hope that helps!
@whoizeh53122 жыл бұрын
🔥🔥🔥
@MediaWayUKLtd2 жыл бұрын
Thanks Izeh Harold! Glad you enjoyed it!
@CG_Pigeon2 жыл бұрын
THANK U LOL
@MediaWayUKLtd2 жыл бұрын
You're welcome!
@transportation-talk2 жыл бұрын
Awesome! Is it possible to use speed/acceleration data to control motion? I heard python can be used with blender, but am not sure if I can provide the data via python.
@MediaWayUKLtd2 жыл бұрын
To be honest, I'm not sure - but I imagine it's possible with enough knowledge of Python.
@dawoodkhan1045 Жыл бұрын
Hey Leo, I love your tutorails, A few months ago i followed your tutorail and i downloaded the rigacar addone, at that time it was working perfectly, but now when i add rigacar addon in my lastest blender version, its not showing in the tab, just like with blender kit, view, item, Why its not visible there, therefore i cant use it or to create some car drifting tutorials.
@MediaWayUKLtd Жыл бұрын
Thanks for the comment Dawood! You might need to download the latest versions. Rigacar 7.1 from here: github.com/digicreatures/rigacar/releases and Blenderkit.com
@dawoodkhan1045 Жыл бұрын
@@MediaWayUKLtd Got it, Thank you!
@moelleunbelievable2 жыл бұрын
Hey man! Thank you for that awesome tutorial, I was actually looking for a car animation like this, so it was great to see this video. I also bought the project file on gumroad, thanks for offering it. I got a little question, though. I am still somewhat of a newbie to render. I tried to replace the skoda with another rigged car, it was easy to retarget the movement via parents etc. But i still wasnt really able to transfer the animation to the new car, so that i would be able to delete the skoda completely. I could animate the new car easily but s the cameras use to follow the camera path and are set up to match the skoda animation, it would be a lot easier to be able to transfer the modifiers. Is there an easy way to copy and paste the folow-path constraint? It would help me a lot!
@MediaWayUKLtd2 жыл бұрын
Hey Moelle! Thanks for your kind feedback!! If you select the model you want to change, and then shift-click the model you want the modifiers from, you then press CTRL+L and hit link modifiers. I think that will work? Good luck!! 👍
@harveyhibbett6267 Жыл бұрын
what i did is got the separated parts of the car and I parented the parts of the new car o the parts of the old car, but I then hid the old parts so you could only see my new car. Also, brilliant video
@brickie7412 Жыл бұрын
How do i make the path?
@MediaWayUKLtd Жыл бұрын
Which part of the tutorial are you stuck on? Time?
@salazar6652 жыл бұрын
If the ground isnt flat but with bumps like a muddy or terrain., can rig a car work with dynamics.? will it sense the gutters and bumps
@MediaWayUKLtd2 жыл бұрын
Hi Salazar! Yes it will - the ground sensors will make the suspension move up and down in a realistic way. Try adding some displacement to the road to see.
@salazar6652 жыл бұрын
@@MediaWayUKLtd thankyou... Will try this
@ic3d-structuraldetailing6952 жыл бұрын
I'm curious regarding the Editorial License of Traffiq. Did you need to obtain permission to use for your videos or is making videos for YT acceptable without required permission and possibly any additional fees if one was to make money from the video? Thanks
@MediaWayUKLtd2 жыл бұрын
I'm not a lawyer, but you can use these models for editorial use, as far as I know, without additional permission.
@sohailwazir76802 жыл бұрын
pls, teach us how to set up cameras. pls pls.
@MediaWayUKLtd2 жыл бұрын
Hi Sohail! I've done a tutorial on setting up the camera in Blender. Have a look at: kzfaq.info/get/bejne/q5iUnaR93dOto5s.html
@sohailwazir76802 жыл бұрын
@@MediaWayUKLtd thank you so much going to watch it now. thanks again.
@traenobivision62472 жыл бұрын
I have tried installing the rigacar addon to my blender but to no avail. My version of blender is 3.2.0. Any advice what to do or how to install the rigacar would be very appreciated. Great tutorial! Unfortunately I can't follow along without the rigacar.
@MediaWayUKLtd2 жыл бұрын
Are you using the latest version of Rigacar? I've just googled and it's 7.1. Download link here: github.com/digicreatures/rigacar/releases/tag/v7.1
@traenobivision6247 Жыл бұрын
@@MediaWayUKLtd thanks Mate!! I got it in order now.
@sttriffe Жыл бұрын
How do configure the render settings ? Can you help please ?
@MediaWayUKLtd Жыл бұрын
Cycles. GPU rendering. 32 samples. Denoising on. Output as MPEG video.
@jaredouru64662 жыл бұрын
Kindly if you don't mind , what type of computer are you using?
@MediaWayUKLtd2 жыл бұрын
Desktop PC - i5 - 16GB RAM - 3080
@nevyinnincymedia60322 жыл бұрын
anything free rigged car is there
@MediaWayUKLtd2 жыл бұрын
Yes - you can download in the description link.
@nevyinnincymedia60322 жыл бұрын
@@MediaWayUKLtd Ya thank you
@shekiba.6462 жыл бұрын
where did you get path follow from ?
@MediaWayUKLtd2 жыл бұрын
Make sure the armature is selected, and you can find it under the Bone Constraint menu on the right.
@soydulalom78942 жыл бұрын
Like 87
@MediaWayUKLtd2 жыл бұрын
Thank you! Cheers!
@naazeanimationstudio62782 жыл бұрын
Will you be again going to give a rigged car for free 😋
@MediaWayUKLtd2 жыл бұрын
Yes - the rigged car is already in the description if you want to download it!