Mega Project TRAP That NO ONE Shows You in Satisfactory Update 8

Рет қаралды 95,491

Күн бұрын

Mega Project TRAP That NO ONE Shows You in Satisfactory Update 8
In this thrilling episode of Satisfactory Update 8, join me as I tackle the colossal task of catching up on a multitude of neglected projects that have piled up around my factory. Get ready for an epic mega-build like never before!
First on the agenda is constructing a state-of-the-art (i wish, lul) monorail system, enabling efficient transportation of aluminum from a distant extraction site.
But that's not all! I also embarked on building a small tower adjacent to the monorail to optimize aluminum production, along with creating other essential items that will propel my factory to new heights.
During my quest, I unlock the highly coveted hoverpack, a game-changing item that grants me unparalleled freedom of movement. Prepare to witness its incredible capabilities and its impact on my efficiency.
As the excitement builds, I tackle the ultimate challenge - a skyscraper mega factory tower. This behemoth structure becomes the heart of my operations, producing radio control units, computers, and other vital components. Witness the birth of an engineering marvel!
But wait, there's more! To streamline resource collection, I constructed a centralized storage vault. Brace yourself for the bizarre and "haunted" conveyor system that links all the towers together. It's an eccentric sight you won't soon forget!
Join me on this epic journey as I lay the foundation for the next colossal mega project, which promises to surpass everything I've built thus far.
Don't forget to leave your thoughts and ideas in the comments below. And if you're a fan of ImKibitz, and TotalXclipse, or love watching mega factory builds, this video is a must-see! Get ready for an unforgettable experience in the world of Satisfactory. Let's dive in and conquer the challenges together!
⭐ Become a Member & Enjoy Perks!
kzfaq.infojoin
👽 Watch The Previous Episode: • It Took a While But it...
🤖 Join Discord Server: / discord
👉 See the Entire Playlist
• SATISFACTORY Season 1
Also check out my other videos:
• ALL VIDEOS
Check the timestamps below!
If you are here, you should probably SUBSCRIBE 🔔
Just saying…
SEGMENTS
00:00 Real Value!
00:12 Where It Starts
10:15 Where It Ends
SATISFACTORY
Satisfactory is a first-person open-world factory-building game with a dash of exploration and combat. Play alone or with friends, explore an alien planet, create multi-story factories, and enter conveyor belt heaven!
SOCIAL MEDIA LINKS
Twitter: / aproxplays
Personal Instagram: / aproxplays
S01E011
HASHTAGS
#satisfactory #letsplay #gameplay #sandbox #aproxplays

Пікірлер: 68

@approximatelybored 11 ай бұрын

⭐ Join as a member and enjoy exclusive benefits! kzfaq.infojoin See how we got here: kzfaq.info/get/bejne/iLyDktiC2dLPgWg.html 🤖Join The Discord Community: discord.gg/nSAWH58hDM

@12okeiman 11 ай бұрын

Drones flying up and down the middle to drop off items from the top of your towers would look nice.

@approximatelybored 11 ай бұрын

Ooooh, thats goooood... you're good at this!

@jonathanmabardy 10 ай бұрын

would take a billion batteries tho

@Shywer 7 ай бұрын

Its not about the cost ... its about style at this point.@@jonathanmabardy

@herlanggaizul6965 11 ай бұрын

8:08 there is a quick swap for that thing, its called "1" so you could just press tab - 1 - tab when fall from hoverpack

@Tactricit4N 11 ай бұрын

Yeo! But it also depends on the order of items under "Equipment shortcuts". If it was in a different slot you need to press the corresponding number for the item you want to quickswap or equip.

@approximatelybored 11 ай бұрын

Will definitely check it out! Thanks!

@herlanggaizul6965 11 ай бұрын

@@Tactricit4N I forgot to mention the condition is in tier 7/8 and have both jetpack and hoverpack. Both of them always be priority shortcut

@giedrel1s 11 ай бұрын

This saved my life!

@JandCanO 9 ай бұрын

Double clicking works too. Not as fast as keyboard, but faster than click and drag

@MrHaggyy 10 ай бұрын

You could make the storage area a cool-looking tower as well, and maybe sort the items by tiers. That way you gain height and can build some neat bridges. But the drone idea mentioned here sounds awesome as well.

@GospelBearer 7 ай бұрын

double click the jet pack when you're falling with the hoverpack on... that's faster than dragging.

@filthyfantasist3880 7 ай бұрын

If you run yourself out of power in the hoverpack, you can hold space for a reduced descent, so you don't bounce off the planet.

@thebeast8022 11 ай бұрын

great my man i love your work too much really

@raggarstickan5045 Ай бұрын

I really liked the name Skoevde C, it kinda reminds me of the swedish town Skövde.

@approximatelybored Ай бұрын

Haha, are tou spying on me? 🧐 I've actually went to Skövde multiple times as a shopping trip when I lived in Oslo 😅😅😅

@raggarstickan5045 Ай бұрын

@@approximatelybored Haha dont worry, I moved to Mariestad in 2007 wich is about 3 miles from Skövde 😅

@skittlezz6088 11 ай бұрын

Thought you had like 100k, great video quality man

@approximatelybored 11 ай бұрын

Wow, Thanks! 🙏

@piotrmartyniuk125 6 ай бұрын

You could also make a tower for conveyor belts with the connection floors as they do for some buildings in a real life. :)

@Fredabawls 8 ай бұрын

Don't worry my laptop runs satisfactory at the same fps u had during that power draining blueprint build. Yes it runs at 14-15 fps on a fresh world save with no other apps open. But on my 500 hr save I run at 2-5fps XD 4:06

@piotrmartyniuk125 6 ай бұрын

8:10 There is a quick swap mod "Hotswap Equipment", but not updated yet for the Unreal 5 engine.

@thebeast8022 11 ай бұрын

i enjoy it thanks you for that vedio brotherrrrrrrrrrrrrrrrrr

@scottfelt513 6 ай бұрын

Wish I was creative enough to make sexy looking sky scrapers lol

@Disorrder 10 ай бұрын

Can’t find any secret here

@tonydotson8541 11 ай бұрын

HOW the heck did you get the conveyor lift to extend so far? I havent been that lucky yet.

@JordanMetroidManiac 11 ай бұрын

You attach between two floor holes. From bottom to top or top to bottom, there is no limit on distance.

@approximatelybored 11 ай бұрын

I found that ~ 200m is the limit, but only sometimes 😅

@MrHaggyy 10 ай бұрын

@@JordanMetroidManiac bottom to top can be buggy / not work as intended. top to bottom worked perfectly fine for me.

@Psoewish 7 ай бұрын

Your elevator gives me anxiety, even if it does look cool in an imposing sort of way lol

@F1v30h1 8 ай бұрын

For Aluminum I dump all water into a buffer then run the water from buffer to the refineries. Put a valve on the inlet water pipe to reduce to the amount that is being made. I think it is easier this way.

@approximatelybored 8 ай бұрын

If used water and pump water goes to the same reservoir, doesn't the production cycle stall when pumps overfill the buffer so the refinery output water has nowhere to evacuate?

@F1v30h1 8 ай бұрын

@@approximatelybored that’s why you use a valve and limit the flow from the pump into the buffer. Then the system always has the exact amount of water needed to run the factory.

@thegardenofeatin5965 4 ай бұрын

@@approximatelybored Here is what I have found: There are two ways to build an aluminum factory that doesn't eventually jam on water: 1. Make absolutely sure that every step in the process runs at 100% duty cycle. You must have a perfectly reliable and perfectly adequate source of bauxite, silica, coke/coal, and whatever consumes ingots down the line NEVER backs up. Design it perfectly so that reclaiming wastewater plus water extractors is exactly correct, and never fail to run the entire line at 100% duty cycle, NO yellow lights allowed, because if even one water extractor is allowed to run while the alumina solution machines are idle, water will accumulate, and it will eventually jam. 2. Design the system with stages that will clear a jam. As many alumina solution foundries as possible should run purely on wastewater with no possible way of getting fresh water from water extractors. These machines should get first pick of bauxite, ie they should be at the feed end of the bauxite manifold so that they fill with bauxite first. As few alumina solution foundries as possible should run on fresh water from extractors. If absolutely necessary these can also consume wastewater through a valve, but there should be no way for fresh water from extractors to get into the wastewater plumbing. The freshwater machines should be at the slack end of the feed manifold and fill with bauxite last. The alumina solution outfeed pipes should also be separate between these two communities, so that one refinery running on fresh water can't pump the entire alumina solution plumbing full. This way, it should not be possible for any stoppage in bauxite, coal/coke, silica, or aluminum ingot outfeed to cause both the alumina solution and the waste water lines to back up and jam; one of the two spaces should have enough room that when the shortage/backup is resolved there's room for some step of the process to resume, clearing any jam. A coal/coke shortage will stop the wastewater line from filling, a silica shortage/ingot backup will stop the wastewater line from filling, a bauxite shortage will stop the alumina solution lines from filling, and when bauxite does arrive the machines that feed on wastewater should start before the freshwater one(s) do, which will free room in the wastewater lines. It may not be 100% jam proof but it's more rugged than "everything has to be perfect 100% of the time or it eventually fails."

@TheGreatSteve 8 ай бұрын

My trains kept crashing into each other today for some inexplicable reason..... in Openttd.

@Diogocb 7 ай бұрын

😂😂😂 very funny

@illiakuznietsov4162 7 ай бұрын

4:30 Was it supposed to be al dente? Because it is way to raw even for that. Spagetti should be weavy) By the way, just randomly stumbled on your channel and you are doing amazing, my man

@approximatelybored 7 ай бұрын

Haha, al dente he says 😂

@Ata5ll 7 күн бұрын

How'd you do all these corners :D

@approximatelybored 5 күн бұрын

What corners?🤔

@henrysinclair5914 11 ай бұрын

i gave up on update 8, performance hit is just far too severe

@approximatelybored 11 ай бұрын

Shameless plug, but I think this could help you: kzfaq.info/get/bejne/qtyoiq2auZPcgJ8.html Involves a bit of tinkering, but the payoff might be worth it 🫡

@MrHaggyy 10 ай бұрын

Might take a look at your setting. It`s running smoothly for me.

@henrysinclair5914 10 ай бұрын

@@MrHaggyynah it was defiantly an engine thing, but has since been fixed

@Mist3rWILD 11 ай бұрын

🤗

@approximatelybored 11 ай бұрын

@dewetskywalker 10 ай бұрын

You're insanely underrated

@approximatelybored 10 ай бұрын

I appreciate that ❤️

@Directx11cool 6 ай бұрын

4:16 looks like you ran out of VRAM. UE5 needs more VRAM than UE4 :)

@approximatelybored 6 ай бұрын

Lucky it's not an issue anymore

@MrGrovestand 5 ай бұрын

I’m curious as to why you transported aluminum scrap via train instead of smelting it on site.

@approximatelybored 5 ай бұрын

Because it needs silica in the mix

@MrGrovestand 5 ай бұрын

@@approximatelybored Oh, right. Haven't made aluminum without using the pure ingot recipe in forever.

@TheKevlar 2 ай бұрын

ROFL! Nice commentary. Why not play Satisfactory Plus MOD! Its a grand challenge...

@approximatelybored 2 ай бұрын

Well, I use some mods, but nothing that changes the core gameplay like new machines or recipes. Only build tools, time/weather control, camera stuff, etc. It can be fun (ex. Powersuit mod) but at that point you're playing a mod, not the game 💁‍♂️

@epicwarding 8 ай бұрын

at 06:25 Bruh , i would never be able to live seeing that floating thing there, bruh.... more time to design to make it better looking and fit in the world and less time making it "compact and efficient" Beaty over efficiency, allways

@approximatelybored 8 ай бұрын

Its not floating... its a mushroom 🍄

@Eatongee 4 ай бұрын

You couldn't justify running a belt, but running a train line is better? lol A belt is no frills and easy. A train needs power, 2 train stations, freight platforms, etc. A belt would be reliable. Set it and forget it.

@approximatelybored 4 ай бұрын

Yeah, but belt also sucks for performance, over that distance would take ages to reach production, cant be used as transport, is lazy and boring. Also, with your logic why even bother doing anything at all? It is easiest to just not build anything, because "you can't fail if you don't try" 😅 100% reliable

@Eatongee 4 ай бұрын

@@approximatelybored All great ideas. Thanks for your input.