Рет қаралды 127
The Melt Flow Index Tester (MFI-192) is a measure of the ease of flow of the melt of a thermoplastic polymer. It is defined as the mass of polymer, in grams, flowing in ten minutes through a capillary of a specific diameter and length by a pressure applied via prescribed alternative gravimetric weights for alternative prescribed temperatures.[1][2] Polymer processors usually correlate the value of MFI with the polymer grade that they have to choose for different processes, and most often this value is not accompanied by the units, because it is taken for granted to be g/10min. Similarly, the test conditions of MFI measurement is normally expressed in kilograms rather than any other units. The method is described in the similar standards ASTM D1238[3] and ISO 1133.
SILGA MICRO SYSTEM
MFG.OF MICRO PROCESSOR BASED INDUSTRIAL PROCESS CONTROL INSTRUMENTS.
PLOT NO-263/L-455, L-Type GIDC ,Odhav
Ahmedabad,Gujarat,INDIA-382415
Gst in:24ABOPG8468R1ZO
Contact Us:
www.silga.in
📧info@silga.in, 📧silgamicro@gmail.com
☎️+9179-22974199
📱+91-99099 05224
📱+91-98250 05224