This is one of those projects you have to measure, time, and cost vs. buying some clamps. I’ll go with buying clamps. Especially the pipe clamps. They are cheap enough.

Видео нужно назвать как испортить домкрат. Это называется столярные кустарные ваймы. Для этого есть настоящие силовые ваймы, которые жмут боксы и доски, это просто для видео сделано, для мелко кустарного производства.

Great imagination for use of an old car jack. You kept us waiting until the end so see what was the end project. Good job!

As an old grease-monkey, I have a few old scissor jacks just kicking around. I have just built my new woodwork shop, and your video has given me a lot of ideas as to how to put them to use.

С таким набором специального инструмента надо заниматься чем-то полезным, а не снимать саморекламу

Clever! Great use of an old car jack. Mahalo for sharing! : )

Thats impressive. That jack can be used for so many purposes. Its a simple expansion design but can carry a lot of weight and pressure. I do own one and I put it to many uses except for raising my vehicles :-)

malaking tulong po pala itong crocodile jack na ito,by the way maraming salamat po sa pagseshare this video keep safe always God Bless

Штука то может и нужная, для тех кто столярными работами занят, однако это не стоит времени потраченного на просмотр, даже с тем что я тупо включил видео за полминуты до конца.

It would be a good idea to show what you're trying to achieve at the beginning to avoid us wasting time.

Good idea for those who work with wood projects.

Beautiful project . GREAT JOB .

Wow...a lot of camera angles. As much work goes into the filming and editing as the actual work itself. This guy really knows how to make a video! Thanks, Men's Craft

I love saving my time and skipping to the end to see what it's for.

Thank very much. Very creative. Bless you.

Если бы у меня было столько струбцин, то я может быть был добрее. :)

Seen this done it's so easy! Congratulations! Brilliant!

Love the idea and execution

Believe it or not, that's exactly what I had in mind. It's great to see it come to fruition here.

Buenísima herramienta para múltiples tareas en mi taller ahora mismo voy a fabricar la mía 😊

The winters are very long for this guy ............... 8 minutes of life wasted serves as a lesson to us all. At least he doesn't talk or live next door. It makes watching paint dry seem an attractive hobby.

good build thanks for sharing

I like it and I think I will use your design to make one for my own shop. Great job!!!

In stead of 50 hours making that, you can buy clamps already made for $12.00. They work great!

Во первых, нужно с объявления говорить о том что предлагаешь! Во вторых, что такое винтовой пресс и как им пользоваться меня учили ещё на уроках труда в Советской Средней Школе!

A very well made video, as well as a useful project. Thanks

Good idea👍👍👍

Чтобы один разок склеить такой небольшой щит можно его и так домкратом поджать между двумя какими угодно упорами. И домкрат не портить. А для профессиональной работы, видимо, существует профессиональный инструмент.

Thanks, I make a lot of cutting boards so I can use this tool. By the way I find I learn by watching your videos and don't make as much mistakes where I do things out of order, and then have to re-do stuff at times. So thanks for that too.

Gute Sache. Saubere Arbeit.

I like it. Might have made the center block about an 1/8 “ shorter to compensate for the slight bow of the 1X3’s or whatever the width is. Good job!

I hate it when another guy is as good on the tools as myself!!! I have to admit, the Dude has some serious talent!!!

Was wondering where you were going with that right to the end. Nice! 👍👍

Сделано хорошо. Но разве нельзя назвать большие тиски?) А не супер шикарная идея?

Brilliant idea! Nice work! Great video! No time wasted. Thanks for sharing.

who else thought this was going to be about how to improve a car jack? but this person actually found a better use for it. Those jacks are a piece of junk for it's intended use.

I think buying two or three Jorgensen clamps would be much easier. Nice assembly

Клёвая идея! Спасибо что поделился 👍

A clever clamp. A slightly different arrangement might get you a useable bench vice.

Great job 👏👏👏

К авторам: вы бы начинали с готового изделия, люди бы время не теряли. Клянусь , полчаса смотрел, так и не понял, что это и как оно мне в жизни поможет .

Простому человеку это не надо совсем. А профессионалы столяры имеют настоящие струбцины для щитов. Испортил домкрат, надо назвать видос.

i m impressed...good job...

Ideia genial parabéns

I made a shoulder vise with one of those jacks a couple years ago, works great!

I made a chess board a few years ago, and all those clamps were a pain...your idea is awesome!!

Well, I have to admit, it was fun to watch, the suspense was killing me, but then I thought....waitaminute WAITAMINUTE! The same exact thing could be accomplished by using a couple pipe clamps, and the lengths could be even MORE versatile, and accomplish the very same thing. I dunno, that's just my opinion.

Brilliant! I didn't know what you where making but wow you sure think outside the box. WAY outside the box. Good job.

I think the way to evaluate this is to think of the final product as a special jig, to be used where there is a lot of repetitive work producing wide boards. But if it's for casual use, I would agree with a lot of the comments that there are perfectly ordinary ways to accomplish the same thing using conventional general purpose tools. This avoids the need to store a rather bulky jig and avoids having to wreck a perfectly good jack. In particular I agree with BeachSideHank that there is a danger of what I would call buckling, and what he calls cupping ? This happened to me decades ago when building a two piece top in oak for a refectory table in the old style. They did buckle, but for some unknown reason over period of months relaxed and the table top came flat.

You’re brilliant

Innovative, nifty, pretty cool even. But brilliant!

VERY GOOD THINKING. I WILL MAKE THESE JACK CLAMPS FOR MY FUTURE GLUEING. THANKYOU FOR THE VEDEO.

As a pipefitter I take my Jack weld a plate on the top and use it as a flange alignment tool you put the flange on the pipe put the Jack inside jack it out and it perfectly takes the hi-lo out of the flange plus holds it up while you tack it!

I swapped out 2 wheels on my tool cabinet (replaced fixed with swivel), I used my 2 car jacks to elevate the cabinet, worked great. On another occasion I tried to use a car Jack to pull out some deep roots from a stump near a concrete base, but didn’t work. So yes you can use a car Jack for somethings and not for other things lol

Beau travail ! Un grand Like 👍

Прикольно замутил,сначала подумал,что очередной стол для фрезера будет

Great idea, very clever! Top!

It is videos like these that answer the question “how did I waste so many precious hours of my life watching useless videos on KZfaq. I always think it’s going to be some amazing tool and then it ends up being an hour or more worth of work to make a basic custom wood clamp out of a car jack. 😑

Brilliant Idea is a gross overstatement !

Можно просто между стен в узком коридоре прижать... 😁 А инструмент у тебя хороший! 👍

結局、最後にできたの何？

I have accomplished the same by blocking the ends of the table with 2 by 4 and using two long clamps what a waste of time even watching this

Super Clamp! Awesome!

Great idea, Stay Safe !!!.

Amazing...Im using a power drill for that jack now whenever I need to change a tire.

What an awesome idea and great tutorial, thanks

Very. Cool and handy. Great 👍 job. Very impressive.

Bonjour Je trouve votre outil sensationnel. Je pense que je vais me fabriquer le même. Un grand merci Luc de France I find your tool sensational. I think I'm going to make myself the same. A big thank-you Luke of France

Buying long clamps would be a lot easier.

Nice. But in the time to make that, I could have gone out & bought a set of cheap sash cramps.

Simple awesome...brilliant..!!!

All those brilliant carpenters so proud of pointing out the obvious . I'll say...Cant, you appreciate the genius of these inventions?

That has clamping power like no other! It's a very powerful clamp in deed!

That's a good technique. I like it too much!

Superbe travail et l'idée !!!😍🤠

I feared I’d be seeing another router lift video, lol. But that jack-clamp would be super useful. I plan to make one asap. Awesome project 🥇

I suppose it had to happen eventually, an actual, good, practical idea from one of these sort of videos!

Ótima idéia. Vivendo e aprendendo. Valeu!

Ok.. can I say I love you? For your ideas? Subscribed!

Clever idea but what about addressing upwards or bowing of the boards being glued when compressed.

Incredible...to anyone who has never seen a pipe clamp.

А вы молодец очень было полезное видео для меня

good job beautiful idea

Like your tool collection. Nice idea for woodworking. One suggestion: when you first use a glue or teak oil, show the label, so we know what it is.

Здравствуйте, а что у вас за карандаш такой?

Finally! Something actually useful built from stuff lying around.

Cool tool ! 😎👍

I like the idea of using a power driver to tighten the device...

who would have thought 2 wedges used by the Egyptians would work just as good after all this time

Wow i was using that same exact idea when i was 20 years old, i'm now 46. It's the best way to spread weight on a vehicle when jacking it up.

Good idea for adjustable clamps for various projects.👍

WoW! Very nice. That's about a $1500 clamp press with the wood prices as they are these days! 😞

I use my car jack with a piece of flat wood fixed to it to position radiators to a wall 👍

Very intelligent and useful tool

I have used a pair of scissor Jack's to set as many as five upper cabinets at a time. Worked perfect. Have had it many years.

最後に出来上がったものが、何の道具になったのか全くわかりません。

Дааа уж. Сделано красиво, вот только зачем было огород городить. 🤦‍♂️

Possibly the greatest video ever

ANOTHER DAMNED COOL CONTRAPTION!

I used a jack like that to free a child that got his head stuck in some railings.