That's all it was intended to be at that time.

The air cleaner mount is a brand new Mercedes part and the rubber mounts are new as well. The engine was running pretty rough because the fuel system was not fully primed yet. I will say this however: After replacing the breather mount just recently (I did not video it), I've noticed that it jiggles around a little more than it did before. Suspect a difference in the quality of the rubber.

Dude you were right. LMAO.... I just went out to check and two of those brand new rubber mounts were broken. I had spares and I replaced them. The spares are Meyle and the ones that broke are CRP. Lesson learned. Breather running smooth again !

😂😂 Yeah I had to buy a new bracket.

Mine has been shaking pretty bad. Found that it had either fatigue cracked off the bracket or the last owner may have intentionally broke it when he was rebuilding the injection pump and couldn't get the bracket past the oil line to the turbo. I just welded the bracket back together and bent the oil line out of the way to get it back together.

This old car is too much fun to drive. :)

I believe it. I own an 85 300D euro non turbo. I look for reasons to drive it. We ll if you decide just please give me first refusal ! 😁

Let go of some of that money Werner! 😀

@@ImpalamansGarage What are you talking about?! Even if I had any money I just don't think I want to do that kind of work on a car any more. Besides I have a MB I have to spend money on constantly just to keep it going. Your car is practically a tank but mine is made from plastic tinker toys. I just ordered a salvaged dome light for about $60. I checked with the dealer once. They wanted $600! $1200 for the rear sun shade. Luckily I don't have to commute to work and put a lot of miles on it. It's already at 150k.

@@wernerdanler2742 car-part.com is a good place to look for salvage parts.

@@ImpalamansGarage thanks. I'll mark them in my favorites.

www.idparts.com/firad-injector-nozzle-314-an0sd314-p-3085.html

I calibrate them in a later video.

No. To be perfectly honest it was not until just recently that I found out that old/bad engine shocks will make you think the engine is missing. Makes a lot of sense really. I plan to replace them very soon. I had the engine mounts off a while back and thoroughly examined them. They looked fine but no way to tell when they were replaced so I will do them too.

Not at that time. I did so in a later video.

I disabled EGR valve a while back. Can you elaborate on the boost valve?

The link is in the description.

So far no leaks. Got lucky maybe.

If you saw a rattily breather you would be correct!! I had to replace the breather bracket later on.😁

@@ImpalamansGarage Did it crack from vibration? It looks like mine cracked at 1 of the three connections. Not sure if that is a common failure or indicative of bad engine mounts. Engine mounts is not something I want to mess with unless absolutely necessary.