Thank you for the kind words man very much appreciated! 🙏🏼

Male sure you press (SET) on each filter and then just hit the back button on the center command by the gear lever

Yes it works , the values are a bit different but you can adjust them to your liking, and thank you for the love brotha i appreciate it!

On the lowpass filter drop it all the way to 40 with steepness at 06 and thats full bass ! 😎👍🏼 thank you for the support!

@@BC2FITTY when i use the lowpass filter i destroy all the excellent adjustments you made by my opinion. I tested that today. Which Filter in the EQ is vor Bass, Middle and High Tone? Do you know that maybe? Than i try to play here very softly. Thanks for the effort in advance!!

@@DerBitfluesterer on low pass/ high pass filter make sure you tune them and hit RET at the top right corner because if you press tune/flat again it will result in resetting all the other filter settings and have to redo everything ive done the same thing even by accident

@@BC2FITTY thx, yes - that i know.

Just copy my settings and i have it a great balance where it doesnt sound distorted

With these current settings i keep treble +10 and bass +2 to +6 depending on music genre it really has enough room to play with

Bluetooth and iPhone thru a app called EverMusic bro , and I just download my songs for free thru a yt to mp3 app and download the song straight to my phone , ima cheapskate bro lol 🤷🏻‍♂️

Yeah these settings exactly , check them out and let me know what you think ! 🤙🏼

@@BC2FITTY Cool, Suree I'll try it out and have a listen to it later...Thanks man!👍🏻

@@BC2FITTY yeahh it sounds awesome now.. much clearer compared with the stock settings.. Just curious if I would like to add slightly more bass to it on the fronts must I increase the Filter 4's Frequency (Octave) settings?

@@qifersalle on the low pass filter lower it to 40 and steepness to 06 for the front and youll unlock full bass

@@BC2FITTY yeahh I just tried it, it really adds the bass but it's a little boomy for my liking haha... but thanks for sharing it... I ended up sticking with your settings they are just right it has a really balanced sound! Thanks again brother, and please keep up with the awesome W204 Tips n Tricks/Vids !🤘👍

on stock amps from factory , no , because the stock amp controls the highs , lows, and subwoofer of it came with it on the mercedes (UNLESS) , the stock amp and system happens to be a great brand like on the Porsche panamera it has a separate amp for the sub that you can adjust from the head unit , but if you swap out stock amp for a aftermarket one just know you might need two amps , 1 for highs and 1 for the lows/bass.

Sorry for the late response if as soon as you adjust the setting you have to hit set at the bottem of each filter , after your done setting all filter click the (ret) on the top right of the screen and you have to do it to each speaker on every side . Hope this helps 👍🏼

Again same problem not setting the new values,please help🙏

@@xhorxhigurma5886did you found a fix? I can’t set it up aswell it was on tuned already and I try to change the settings

Oh ok I think you’d have to check which NTG interface you have , and you also have to have audio20 sound system

@@BC2FITTY it does work but on samsung phone's the car tells me that it is paused

Depending on what your using , as in third party app to play music , that mostly has to do with the particular settings in your phone or app , check to make sure you go to Bluetooth setting and tap on the ⚙️ next to MBBluetooth and see if you have media audio turned on

It’s best if you run Hi-Res music. Tidal and Qobuz are both incredible hi quality streaming platforms

Did you change the low/high pass filter too and (set) that as well ?

Same problem the values dont change😕

Same problem but they are on tuned, do you have any tips how to solve?

you have to press set on the bottom of each filter and then hit the 🔙 (Ret) on the screen using the center command knob and u have to turn on the high/low pass filters from (FLAT) -> (TUNE) and set each one of those as well then you should be good from there bro

@@BC2FITTY I have logic 7 maybe that’s the problem? Is that important to start from the top left then go down and then do the next step by step?

If you see the bar on the top right that says "TUNE" which normally says "FLAT" its next to "RET" so you have to click on the "FLAT" icon so you can tune each filter and once you have it dialed press set for each individual filter , after that just press return thats it and you have to do this for every individual filter and low/pass filter settings if not it wont store . (((dont press the tune/flat after tuning your settings because it will reset back to FLAT)))

@@BC2FITTY each time I do that it automatically returns it back to flat…very frustrating lol

@@SampDeLeon is the key switch in the on position / engine off when your doing this ?

Again the problem not Fixed please help

@@xhorxhigurma5886did you found a solution?