How to change the oil and oil filter on a 2010-2015 Mercedes Benz GLK350. Start the engine and let it warm up for 5 to 10 minutes, as this helps the oil heat up and allows it to drain more easily.
Tools Required:
Oil filter wrench, 8mm socket, 13mm ratchet wrench or 13mm socket and ratchet, 22 mm wrench, small screwdriver.
Procedures:
Remove front engine cover, remove oil filter housing, remove oil filter and seal with small screwdriver, install the new rubber seal and the new oil filter, ( part # A 276 180 00 09), lubricate seals with oil, screw in filter housing, torque oil filter housing to 25 N.m (newton meter).
next step:
Remove plastic shielding (8mm bolts x 8), unbolt oil drain bolt (13mm ratchet wrench), allow the oil to drain until it tapers off to a few drops, place new copper ring on drain bolt, install oil drain plug with crush washer, torque oil drain bolt to 30Nm.
next step:
Fill engine with 6.9 quarts of oil ( Mercedes Benz Genuine Engine Oil, SAE 5W - 40, MB 229,5). Start the engine and check for leaks, install plastic shielding.
Hope you have found this helpful!
Music in this video
Song: Moonlight Sonata (by Beethoven)
Artist: Beetthoven
Album: Moonlight Sonata (by Beethoven)
Licensed to KZfaq by KZfaq Audio Library
DISCLAIMER : The material in this video is provided for entertainment purposes only. Any action you take upon the information on this video is strictly at your own risk, & we will not be liable for any losses or damages.
© Michael Koren, 2023. All rights reserved. Any reproduction or republication of all or part of this video/audio is prohibited.