If you are replacing your rear brake pads then you will need to use this function in order to release the electronic handbrake mechanism so that you can access the brake pads and then if required removed the disc
Пікірлер: 41
@alektanno6802 жыл бұрын
Thank you big help. first advice released the handbrake.
@PGM11122 жыл бұрын
Thanks you very much !!!!!
@dantube4202 жыл бұрын
Brilliant, this quick video just saved me about 300 quid!
@mercedes_and_more2 жыл бұрын
Looking forward to the “cheque in the post!” 😂😂
@jasminesmith6115 Жыл бұрын
Thank you 😊
@sonlee49616 ай бұрын
Thank you! Your video worked for my American model. Cheer!
@mercedes_and_more6 ай бұрын
Glad to have been of help👍
@hrautosportgarage8362 жыл бұрын
Helpful thanks
@mercedes_and_more2 жыл бұрын
Great to hear. Thanks for the positive feedback 👍
@ssenyongasaul5368 Жыл бұрын
Does this E.213 share front brake pads with the GLC 2017 model ?
@mercedes_and_more Жыл бұрын
The GLC shares its under pinnings with the C which shares virtually all of its floorplan with the E, so i suspect it will. Even if the sizes were different then the methods of changing would be the same.
@WizzRacing2 жыл бұрын
This is way faster then booting up my scanner to put the brakes in service mode...
@johnathancox58938 ай бұрын
Hey if I am trying this and the car tells me fitting position not met what should I do?. I took the caliper pistion off and changed the breaks like you would on a normal car not knowing of this process. Now i cant get the piston to retract in.
@mercedes_and_more8 ай бұрын
I’m sorry, i don’t know the answer. Maybe refit the old parts and see if the replacement mode works then refit the new parts?
@Ljtaz11226 ай бұрын
I had that problem and had to twist the caliper piston inward then Compress it With a c clamp…
@armanr40258 ай бұрын
Just want to ask after doing the brake pad release in the dask board do you need to switch off the engine while replacing the pad?
@mercedes_and_more8 ай бұрын
Yes. The engine should not be on anyway. Think this is done in the Ignition position (but you’d have to check the video).
@armanr40257 ай бұрын
Thanks 👏👏👏
@donien3113 Жыл бұрын
Any idea of method for the model without the wide screen? 2016 W213
@mercedes_and_more Жыл бұрын
This might help? kzfaq.info/get/bejne/i9iFedOll6-xZ5c.html
@bluewatersign7 ай бұрын
Is this for the rear pads? Do you need to do it for the fronts as well?
@mercedes_and_more7 ай бұрын
Only for the rears 👍
@demirunlusoy27959 ай бұрын
Does this method work on newest 2023 C series ?
@mercedes_and_more9 ай бұрын
It is very likely as the MBux system that was put in the 213 after the 2020 facelift has the same “hidden menu”.
@user-yo7uc3ny8l5 ай бұрын
Does this remove the need for a wind back tool
@mercedes_and_more5 ай бұрын
No. You use this to release the “handbrake” (it clamps the pads on to the disc) and then you proceed as normal to repair the pads/discs like another car. There is a video on how to do the rear brakes on my channel aswell 👍
@AMGTOUGEX Жыл бұрын
Thank you!! All these other videos are dumb!
@mercedes_and_more Жыл бұрын
I think that’s a compliment? (assuming you don’t mean all of the other ones on my channel🤔)
@lamoorproduction55011 ай бұрын
Do you need to set a gear to Neutral (N) Position?
@mercedes_and_more11 ай бұрын
No you do not need to put it in neutral and can stay in park
@lamoorproduction55011 ай бұрын
@@mercedes_and_more thank you. I’ve seen some videos on KZfaq, that said that you always need to set a gear in N, because you can’t get out of break pad replacement mode if you don’t do it. But you have already done it, that’s why I asked you. Thank you for helping
@mercedes_and_more11 ай бұрын
@@lamoorproduction550 I’ll check tomorrow but I’m 99% sure you don’t leave park! You’ve got me wondering now 😳
@mercedes_and_more11 ай бұрын
So i said i would Check. Car in park and handbrake on it said conditions not met. So pressed the key again to get all lights on and then released the handbrake. Pressed key start again to go back to ignition and went into fitting mode when asked (car in park). Clearly doing this in N would not be good as the car is free to roll if not on level ground👍
@lamoorproduction55011 ай бұрын
@@mercedes_and_more thanks for helping
@yomnR Жыл бұрын
Top.. 😎
@mercedes_and_more Жыл бұрын
Thanks 👍👍
@DYAMG Жыл бұрын
If we dont do this we wont be able to replace rear brake pad?
@mercedes_and_more Жыл бұрын
Correct. This frees the pads for the discs, although you still need to wind them back in (as per the video). In reality, this is releasing the electronic handbrake in a way that will not allow it to be reapplied during the brake pad change 👍
@DYAMG Жыл бұрын
@@mercedes_and_more thank you
@thomasmercier3760 Жыл бұрын
Do you realize that knowing the goshdarn YEAR would HELP!!!!!
@mercedes_and_more Жыл бұрын
??? Not quite sure what you mean by your comment? Think it’s good but…