check out my new welcome lights if your interested in your own set get them at the link below Link: www.amazon.com/Projector-Cour...
Пікірлер: 73
@-smp-scientificmethodpersp8384 жыл бұрын
Nice display with it not being so dark out. It shows how bright it is, unlike the people who show it in Pitch black and when you buy the product, it doesn't show unless your in total darkness
@mikaylavery6 жыл бұрын
Thanks! Works perfectly
@fatalambitions55976 жыл бұрын
Your welcome hope you enjoy them as much as i do
@vraja3203 Жыл бұрын
Man it must have been a good creeper. However, it was a good video showing not a hard job. I thought i had to take out the door panels since they like to make it difficult
@mrbennymiah6 жыл бұрын
Hi I've got the same lights as yours. Now the problem I'm having is the clip which is exposed once the bulb is taking out does not fit in the attachment. I've noticed the same on yours. The clips has the 2 ports in the middle of the clip but the attachment has the input holes in the bottom. So it doesn't line up. How did you tackle this issue?
@fatalambitions55976 жыл бұрын
are u talking about the end of the wiring harness
@mrbennymiah6 жыл бұрын
FatalAmbitions the clip that is exposed once you take the bulb off has the ports which the pins on the new product goes into. But they dont line up. I'm scared to force it incase it breaks.
@moonmc10473 жыл бұрын
@@fatalambitions5597 ผมรีบไปถึง
@ScooterBoyQ6 жыл бұрын
Are you high bro
@fatalambitions55976 жыл бұрын
no i do not do drugs lol
@ScooterBoyQ5 жыл бұрын
Lol all good. You just look real stoned.
@fatalambitions55975 жыл бұрын
lol yea i did this video after working 12 hour work shift
@Wintertoocold4 жыл бұрын
Yunho Kim why are you so damn interested
@user-cw6ld9oj9i4 жыл бұрын
I bought me 2 sets of those for front and rear..i only put in the fronts and never got around to putting in rear ones..they looked good for a year or so..but no they look brownish..the blue wore off it seems....others on amazon have said the same thing in the reviews. The only other thing I don't care about these, they not as red looking as the originals when you look at them from a distance when you open the door..bit towards the muddle red..like a burnt orange maybe is the color for them.
@daffa69154 жыл бұрын
where can i get the money to buy for the mercedes?
@Ddadon2x5 жыл бұрын
Do u think they will fit in my 2017 Mercdedes E300?
@fatalambitions55974 жыл бұрын
they sell a set for that car you just have to google it
@gustavoaragon41942 жыл бұрын
I have a hard time putting the new ones
@fatalambitions55972 жыл бұрын
what was your issue
@bwneyecuttie265 жыл бұрын
Can u do this to all mercedes?
@fatalambitions55975 жыл бұрын
your should be able to do this to any mercedes that have lights in the door panels you would just need to buy the lights that work with what ever type of Mercedes you have
@zachperry3936 жыл бұрын
Was planning on doing this tomorrow for my 2014 c300. I couldn't really tell what was going on because of the lighting but do you pry the entire light off? And how exactly do you pull the rest out to get to where it plugs in?
@fatalambitions55976 жыл бұрын
u take the red part off should pop off if u put a screw driver or something behind it there there is 2 clips in side u want to pull outwards on easier if u can pull both at the same time then u just pull it out
@kimranahmed6 жыл бұрын
what year is your c300 is? I got a 2012 wonder if would work
hmm..i checked mine, there isnt any running wire coming to the door light! Wonder if I can buy the wire separately then how difficult it is to install and run from fuse box outlets?
@fatalambitions55976 жыл бұрын
i am not sure i know yours is after the face lift not sure how much different it is from the ones i installed
@CR-yd9ud5 жыл бұрын
Is there any oem projectors for 2017 MB C300. These look so ugly with that big lump sticking out (so unattractive) specially for a MB.
@fatalambitions55975 жыл бұрын
i dont think they make them oem but not sure for something that new i mean even if they did i dont see how you could project the image on the ground with out it sticking away from the door panel unless your light is on the bottom of the door
@MrKDawg294 жыл бұрын
They make them oem just ask your local mb dealer
@wailfaridi20704 жыл бұрын
This guy is so out of breath lmao. Also flying with the birds
@garrettdodson61105 жыл бұрын
Interesting upgrade. Oh and at about 32 seconds in it’s “specifically” not “pacifically”
@fatalambitions55975 жыл бұрын
we got a speech teacher here
@garrettdodson61105 жыл бұрын
Yes and I didn’t mean that to mean or anything lol that’s just almost as bad as people who think “irregardless” is a word. It just makes people sound uneducated.
@fatalambitions55975 жыл бұрын
@@garrettdodson6110 Your fine I didnt mean to say it that way when i filmed this video was after I got done with a 12 hour work day so parts didn't come out the way i would have liked and i just rolled with it humans make mistakes so i never cared to fix it
@fatalambitions55975 жыл бұрын
But this is one of the only upgrades i have done that is more for you the owner of the car then anyone else because its a things strangers never get to see but people that get in my car has always liked it
@xaviersmith9575 жыл бұрын
Will this work on an 06 C230?
@fatalambitions55975 жыл бұрын
well that is a second generation car so it would be a little different both cars dont have the same door panels you would just have to buy the right light made for that car and then locate where it is on the door panel after that then install will be the same all models just click in depending on what brand lights you buy some wire may not be as easy not all plug in the factory harness
@RETOXLP5 жыл бұрын
Do i loose young Stars Warranty if i do this??
@fatalambitions55975 жыл бұрын
not really sure my car dont have a warranty
@gameplayer2226 жыл бұрын
Is your Mercedes-Benz c300 the pre facelift or facelift model?
@fatalambitions55976 жыл бұрын
it is the pre facelift
@1vonvon4 жыл бұрын
How about a 2016 c300 4matic
@fatalambitions55974 жыл бұрын
they do sell a set for that car the install is just a little different