in this video I will share with you how to remove and replace rear brake pads and rotor on a Mercedes E350
Пікірлер: 89
@notsure75543 ай бұрын
Excellent. Best I've seen on YT. Thank you for making this video. Much appreciated.
@KITS_Auto_and_Truck_Repair3 ай бұрын
@notsure7554 Thank you!
@USNMU Жыл бұрын
I sure am glad I found this video... I had no idea the rear caliber bolts were hex bolts!
@KITS_Auto_and_Truck_Repair Жыл бұрын
John Gulyas I'm glad you like the video!
@MutieThePig Жыл бұрын
Great video. Just exactly what I needed to know for my E350 rear brakes that I am tackling tomorrow. Thank you.
@KITS_Auto_and_Truck_Repair Жыл бұрын
MutieThePig My Pleasure!! and Good Luck with your project!
@MrBob4244 Жыл бұрын
Great job explaining the job, very well done. Thanks.
@KITS_Auto_and_Truck_Repair Жыл бұрын
Bob H My Pleasure! Thanks
@nickcordone7046 Жыл бұрын
THANK YOU I JUST DID A REPLACEMENT OF THE REAR BRAKES ON MY 2013 E350 WORKED OUT PERFECTLY AS PER YOUR VIDEO AGAIN THANK YOU KNOWLEDGE IS POWER
@KITS_Auto_and_Truck_Repair Жыл бұрын
Nick Cordone My Pleasure! I'm glad to hear that the video was helpful!
@ynte81149 ай бұрын
Thank you sir. So much detail, thank you again. Greetings from Germany
@KITS_Auto_and_Truck_Repair9 ай бұрын
@ynte8114 My Pleasure! Thanks for letting me know where you are watching from!
@lorenreyes28552 жыл бұрын
Great tutorial on a Mercedes Benz rear brake replacement and repair. 👍👍👍👍👍
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Loren Reyes Thank you!
@dinhas93982 жыл бұрын
Good job, I feel inspired from your hard work and knowledge! 🛠🔧⚙️
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Lidia Santos Thank you!! I appreciate you!!
@joea1746 Жыл бұрын
Awesome video and good followup comments from viewers as well. If that were my vehicle I would do both rear brakes same time.
@KITS_Auto_and_Truck_Repair Жыл бұрын
@joea1746 Thank you!
@PhatSphouthalansy9 ай бұрын
Oh man you so good the mechanic you should make a lot money because the Mercedes they cost bouble money I so proud of you
@KITS_Auto_and_Truck_Repair9 ай бұрын
@PhatSphouthalansy Thank you!
@MrRoyPacheco2 ай бұрын
NICE JOB! THANKS!
@KITS_Auto_and_Truck_Repair2 ай бұрын
@MrRoyPacheco My Pleasure!
@DJ-kb3pl2 жыл бұрын
👍🏾Nice. Clear and precise.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
DJ 7 Thank you!
@BikesAndBrewing6 ай бұрын
Excellent very thorough vid! Thx!
@KITS_Auto_and_Truck_Repair6 ай бұрын
@BikesAndBrewing My Pleasure!
@coolcaiman9640 Жыл бұрын
You are the man. Every step clearly explained.
@KITS_Auto_and_Truck_Repair Жыл бұрын
CoolCaiman Thank you!!
@julie-annquayle3877Ай бұрын
Good job ,and well explained.
@KITS_Auto_and_Truck_RepairАй бұрын
@julie-annquayle3877 Thanks!
@crazypict Жыл бұрын
Very instructive video. It would be good if you mentioned what the tool dimensions you use in the video. You said the tool size one time in the beginning of the video. Otherwise, thanks for a good video!
@KITS_Auto_and_Truck_Repair Жыл бұрын
Erik Thank you!
@a10nmw Жыл бұрын
Very clear video. Thanks
@KITS_Auto_and_Truck_Repair Жыл бұрын
Man10 W My Pleasure! Thank you!
@josueordazlopez29232 жыл бұрын
Saludos desde México🤝
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Josue Ordaz lopez Thank you!!
@MrVrics Жыл бұрын
very well presented thank you
@KITS_Auto_and_Truck_Repair Жыл бұрын
Art K My Pleasure! Thanks
@kevinhill418611 ай бұрын
Thank you buddy🏴
@KITS_Auto_and_Truck_Repair11 ай бұрын
@kevinhill4186 My Pleasure!
@seunfire2 жыл бұрын
Nice work chief
@KITS_Auto_and_Truck_Repair2 жыл бұрын
seun jason Thank you!!
@pteamg4 ай бұрын
good job dude
@KITS_Auto_and_Truck_Repair4 ай бұрын
@pteamg Thank you!
@maxwelllloydpinnock.59302 ай бұрын
Good job my men. I am hoping they Lubricate my brakes pads like you do off Camara. I like the job you do, I am hoping you do it the same off Camara. The greasing part of it I am talking about.
@KITS_Auto_and_Truck_Repair2 ай бұрын
@maxwelllloydpinnock.5930 Thank you!
@dinoferrara7536 Жыл бұрын
Il migliore.
@KITS_Auto_and_Truck_Repair Жыл бұрын
Dino Ferrara Good!
@jeffkezerian4169 Жыл бұрын
Hi Good Video! Nice place and perfect clarity. I am changing my rear brakes today and saw that your clips are not properly installed. The arms in the clip need to be on the opposing face of the mounting bracket which is how my E350 has it on the original brake setup (which is still in my car). I have a picture of it and I will figure out how to upload. I'm not KZfaq savvy but I will do my best to get the picture uploaded. The way you have it in your video does not provide the required preload to the caliper. The clip are can also impede the outer pad motion. Please check other sources. Otherwise excellent video!
@KITS_Auto_and_Truck_Repair Жыл бұрын
Jeff Kezerian Thank you! and thanks for your feedback, the clip on the caliper was corrected but sadly my camera battery was dead when I rearranged it!
@larrykush432 жыл бұрын
Thank you… you save me almost 1100 dollars
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Cox Kush My Pleasure!! I'm glad to hear that the video was helpful!!
@jaybo107 Жыл бұрын
You could have left the caliper bolt in and just took the two bracket bolt out. When you compress the piston back in to remove the brake pads you just can slide the new ones back in. You just added a step you did not have to do.
@KITS_Auto_and_Truck_Repair Жыл бұрын
jaybo107 2019 Oh you meant detaching the caliper from the bracket? what about if your caliper pins are frozen?
@jaybo107 Жыл бұрын
@@KITS_Auto_and_Truck_Repair good question haven’t came across that one yet. Usually get a lot of front rotors being Frozen.
@KITS_Auto_and_Truck_Repair Жыл бұрын
@@jaybo107 ah ok! Sometimes the caliper pins freeze!!
@DrPolarisMD Жыл бұрын
Good video. Changing rotors/pads is much easier on MB than on VW with their stupid tripple-square bolts and next to impossible to reach location for DIYer. EPB is another drama to deal with.
@KITS_Auto_and_Truck_Repair Жыл бұрын
Igor PMR haha yeah VWs can be challenging sometimes!
@NextLevelAutoDiagnostics Жыл бұрын
Great job! Just double check your torque values @ 14:25 as it should it at least twice that number off the top of my head.
@KITS_Auto_and_Truck_Repair Жыл бұрын
Next Level Auto Diagnostics do you mean it's low ?
@ronnash7289Ай бұрын
HI Excellent video. I am having difficulty removing the rotor, hand brake off, but in park mode. Is it the case of just giving the back of the rotor a good old smack to release it? 🙂
@KITS_Auto_and_Truck_RepairАй бұрын
@ronnash7289 Yes!
@richard18352 жыл бұрын
Did that Mercedes have an Electronic Parking Brake? Great Job on the Brake and Rotor Service
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Richard 1 Thank you!! No it didn't have electronic park brake!!
@LilV8 Жыл бұрын
Is it ok to use after market rotors and brake pads from Callahan?
@KITS_Auto_and_Truck_Repair Жыл бұрын
Marilyn Garcia Yes!
@HM-ke1qm Жыл бұрын
why some other videos say you have to deactivate sbc before you change brakes on these mecedes?
@KITS_Auto_and_Truck_Repair Жыл бұрын
@HM-ke1qm you don't have to!
@PhatSphouthalansy9 ай бұрын
My Mercedes glasses 2014 still need two things changing head gasket brake pad and rotor and I can drive so I knew that cost a lot money more than $2000
@KITS_Auto_and_Truck_Repair9 ай бұрын
@PhatSphouthalansy Yeah these vehicles are pretty expensive to maintain!
@himiandvee42516 ай бұрын
Do i have to replace the rotor
@KITS_Auto_and_Truck_Repair6 ай бұрын
@himiandvee4251 Not necessarily!!
@tylertran93nsx Жыл бұрын
I need help, I have a 2012 Mercedes E350 and I can’t turn off my AC button, it’s constantly on. Helpppp.
@KITS_Auto_and_Truck_Repair Жыл бұрын
Tyler Tran disconnect the blower motor and check if your resistor is shorted!
@tylertran93nsx Жыл бұрын
@@KITS_Auto_and_Truck_Repair the AC is blowing cold and it works... I just can’t shut it off with the button.
@KITS_Auto_and_Truck_Repair Жыл бұрын
@@tylertran93nsx Ok, Your button could be defective !
@MrRoyPacheco2 ай бұрын
Forgot to ask, how to reset thebrake wear signal in the dash!
@KITS_Auto_and_Truck_Repair2 ай бұрын
@MrRoyPacheco you have to use a capable scanner to do that!
@ViscoloBest2 жыл бұрын
You got the spring back in wrong LOL min 20:45 :))))))))
@KITS_Auto_and_Truck_Repair2 жыл бұрын
Alex Best That's how that spring goes in!! I'm positive about it!
@ericwalz23442 жыл бұрын
@@KITS_Auto_and_Truck_Repair That spring is definitely in the wrong position. I hope you corrected it before the customer picked up the car. Compare the spring position at 19:56 vs 4:05 and you will see.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
@@ericwalz2344 yes it was corrected! I forgot to show how I corrected it on camera! Thanks!
@DJ-kb3pl2 жыл бұрын
@@KITS_Auto_and_Truck_Repair That spring is a pain in the butt to get back on and I’m not even mad you didn’t show your correction because anyone that’s not a mechanic that has performed this job, already know.
@KITS_Auto_and_Truck_Repair2 жыл бұрын
@@DJ-kb3pl Sounds good!
@BlueCollarClub Жыл бұрын
These are front brakes🤷🏾♂️ what about the rear w electric pbrake
@KITS_Auto_and_Truck_Repair Жыл бұрын
I'll Fix U it's basically the same process but you might need a capable scan tool to retract the caliper pistons!
@1973ggraves11 ай бұрын
On the caliber bracket what size bolts are they mm