Replacing my oem front grill with new black diamond 2018 and black led front emblem.
Пікірлер: 88
@fairjordan3 жыл бұрын
Had this video saved for a year. Finally order my new grill and will be installing in a week or two
@fairjordan3 жыл бұрын
Took a few hands to help but just completed my install. Looks great. Was a little tough getting the new grill in under the bumper clips but got it done. Thanks for making this video and showing that it’s possible
@joea17465 жыл бұрын
Those three upper tabs determine the proper distance spacing top bumper to hood. Recommend before pulling them out mark current position of those three tabs. That way when installing new grille you'll know how far insert those tabs. I replaced those rivets with automotive screws held in place with clips. Looks really nice OEM. Better than those pain in the ass rivets. This way in the future need to remove front bumper it will make things a bit easier. Thanks Chase for sharing.
@akosilakas5 жыл бұрын
It looks like the new grill does not have those 3 tabs. Can you pull them off the old grill?
@joea17465 жыл бұрын
@@akosilakas That's a good question. I'm having my old grille swab with the new diamond grille in a few weeks. A custom detail shop will help me removing the bumper to do the swab. I'll see if those three tabs can be used.
@akosilakas5 жыл бұрын
@@joea1746 can you please put it on video and share it? I've been wanting to change mine for a while now.
@joea17465 жыл бұрын
@@akosilakas Going to have a custom shop help me with the grille swap end of Jun. They will remove the bumper since they do this all the time with other high end vehicles. Unfortunately I won't be able to make a video of the process. However, I will try to provide video after the install with some comments how they did the install. I will post it on my youtube channel Joe A.
@nesscog22873 жыл бұрын
Dude, i did the same on my 2016, no chance in Hxxx to do it without taking of the bumber. So many rivits have to be drilled out, than you have to take of or out other plastic peaces that hold the grill in the bottom + remove the foam peace that goes across the inside of the bumber. What is needed here is just to take out few plastic clips in the wheal housing and some screws and the bumber is of. Never done it before, and it took me 3,5-4 hours in total, to figure out each detail by looking in the manuel etc. And you have to rivit the grill back on, it will not work with any kind of screws. Lot of work i would say.
@northwestfive4443 жыл бұрын
Thank you for this vid bro. Was searching everywhere for this. 👍🏼
@MB2124 жыл бұрын
That’s nice W212 mate 👍
@danielward346910 ай бұрын
Just did this today, a bit fiddly but definitely possible, thanks for the video mate!
@georgemedina37125 жыл бұрын
Wow finnaly a video for the facelift 212 ... I have a 2015 e400 sedan and been dying to change that ugly 2 slab grill but been hesitant....I wish u shot a actual video of the removal 😪. But thanks for the heads up about the non removal of the bumper cover ... Thanks ..I'll subscribe and once I get the grill I'll b emailing you lol
@stekkensdnbhd3 жыл бұрын
Thanks much. I manage to dismantle the same way, without the hard bumper.
@hervio25863 жыл бұрын
Wow thanks man, I’ve been searching for this for weeks.
@5daycars3 жыл бұрын
Glad you found me👍
@bulmear2531 Жыл бұрын
this is amazing been looking for a way to do it like this
@macnificentproductions54882 жыл бұрын
Wooing was the most cutting my hand an pulling an pushing a task but was free thanks my friend
@paulburnett45882 жыл бұрын
Nice video! Can you show how you removed the front grill because I want to do the same type of project on my 2013 E550?
@Manbeast2225 жыл бұрын
Can the luxury style grill be installed after the sport one you have is removed? I can't find any videos on anyone doing that for this particular model
@vira11503 жыл бұрын
There is absolutely no point whatsoever to change the grill without removing the bumper. The complete bumper removal took me as an amateur about 1 hour, the rebuild was the same. Changing the grill itself, about 1,5-2 hours. And I saw right away that it could be done a lot faster with the complete bumper on the floor. Thanks for the video though, it was sorta helpful..
@MOB_AMG6 ай бұрын
I'm half way through this job. I've got the bumper off, GTR/panamerica grill in (with a bit of a gap at the bottom of the chrome). The Mercedes star badge does not fit the GTR grill. I've tried for hours, spun it every direction. The clips on the back are nowhere near touching and the star doesn't even want to fit in. Car is 2013 e400 with the "amg" 2 horizontal line factory grill. Did you have to get a new star badge (mine has distronic, so just plastic badge), or did you modify the original? Any tips greatly appreciated and I will attack it again and hopefully finish it tomorrow. What a nightmare of a job!!
@christianbarajas60942 жыл бұрын
So it’s just the rivets up top and clips down below? Just received mine but a little hesitant. I wanted to know if that’s the only things holding the grill in place?
@MercedesE63S-AMG4 ай бұрын
@5daycars where did you get the carbon inserts on the sides from?
@plouffe.2 жыл бұрын
Great video! Where’d you get the kit?!
@Azaad19563 жыл бұрын
Hello can you tell me where you bought the rocker panel insert. Thanks
@AmirHamza-kf9lh2 жыл бұрын
Hey man whats the part number for the rubber strip you removed before removing the screws?
@macnificentproductions54882 жыл бұрын
I need to see the bumper go back on lol 😆
@nesscog22874 жыл бұрын
If you take off the bumber, is it realy neccesary to take of the chrome/steel trim if you have full access to a grill from the inside and only want to replace it with a same new one? Why removing steel rivets?
@daniellacampbell46722 жыл бұрын
Someone just hit my grill while I was in my house. And now I need to replace it myself. Can I send you a pic of what it looks like and you can tell me what grill I need and if it's more then a grill I need to replace
@richardking9720 Жыл бұрын
Hello can you show me how to wire the lighted emblem I already did the grill install but can’t figure out how to wire the lighted emblem.please?
@valentinocruz4453 Жыл бұрын
Bro, you are the man I appreciate the video
@valentinocruz4453 Жыл бұрын
Question, I have a W213. Would it be the same procedure?
@5daycars Жыл бұрын
I'm not as familiar with the W213. It surely is similar only one model apart. Happy to help if you get stuck. 👍
@maccityaus5 жыл бұрын
Do you have the part number for the original diamond grille?
@tobiasgermany93694 жыл бұрын
Is it poseble to replace a Mercedes e Class 280 with a e 350 Grill?
@carloshereaud54634 жыл бұрын
That one also got the m276 engine?
@AlvinShen4 жыл бұрын
How did you remove the old lip?
@meatdaddy13992 жыл бұрын
Will this work for a 2013 E350 coup?
@tony-qh8km10 ай бұрын
how do you remove the sea saw things at 3:03 it’s really tough
@SRC123ish3 жыл бұрын
How did you make it to the first step lol?
@i123456789ify4 жыл бұрын
Where did I get the grill from
@yegor13r Жыл бұрын
thanks it was useful
@robertmatthews75275 жыл бұрын
great ! thanks - looks like a bunch of wiggling and sweat - I have to decide which new one I want to replace it with
@joea17465 жыл бұрын
Recently installed my diamond grille on my 2016 E400 W212 and yes removing the bumper is the correct way doing this. That chrome ring trim around the ground does have 4 tiny screws located behind the grille. Yeah you can prey lose the chrome ring trim with a plastic trim tool but you'll be breaking off the tiny screws. I posted a video in my channel of the end result of installation.
@firered03snake5 жыл бұрын
Hey brother nice vid! I’m having difficulties removing the chrome trim of the grill..how did you remove those screws ? Thanks
@5daycars5 жыл бұрын
So if you are talking about the chrome frame bezel that goes around the outside perimeter of the grill just take a plastic tool like shown and start at the top. Wedge the tool between the chrome frame and the car and it will start coming off. There are no screws. Just about 20 small clips.
@j.gamble22365 жыл бұрын
@@5daycars yes there are 4 screws bro. 4 tiny ones. You obviously missed the..
@MOB_AMG6 ай бұрын
There are 4 torx T10 across the inside of the grill holding on the chrome outer ring. You can probably snap them and remove the grill without removing the bumper as this guy has.
@fps1972 жыл бұрын
Where did you get the side skirt inserts? I literally cannot find them anywhere on the market. A little help would be greatly appreciated :)!
@5daycars2 жыл бұрын
A carbon fiber online store...AirWing.com
@jorangel874 жыл бұрын
Are you in Chicago?
@tyrellakin Жыл бұрын
Can you do this with the 2014 cls model?
@5daycars Жыл бұрын
Only if you don't have the distronic system and or the sensors up front 👍
@mauricebankhead70843 жыл бұрын
How do you get your mirrors to fold in I have the same vehicle and I don't know how to do it please help
@simonwalker24603 жыл бұрын
Its in the car settings
@OkeechobeeFlorida3 жыл бұрын
Where did you get the grill? I have a 2014 E350 Cabriolet 2 Door and My Front grill got smashed up
@TeamJordanXclusive232 жыл бұрын
You ever get a new grill… I need 1 I have2016
@georgemedina37125 жыл бұрын
So with the steel rivets . You basically just drill them out and I'm assuming they get replaced with the new rivets that come with the new grill ?.. also my OEM grill has the OEM illuminated star .. any info on removal of that? Is is jut a simple harness connection? Thanks
@tonykoboci40515 жыл бұрын
George Medina did you get the steel rivets with the new grill
@j.gamble22365 жыл бұрын
I received new rivets with my grill and the plastic pieces needed. It should include everything.
@j.gamble22365 жыл бұрын
Also, dont do this method. Even if you get all this stuff off, there is not enough space to pull the grill out. The grill has a lip that is under the bumper cover and the foam behind bumper prevents any extra room. I tried this method and ended up having to remove the full bumper to finish the job.
@georgemedina37125 жыл бұрын
@@tonykoboci4051 not yet . Maybe in a few weeks
@g.a.mendoza10642 жыл бұрын
Where did you get that front grille emblem logo?
@5daycars2 жыл бұрын
Amazon 👍
@benjaminstonecipher193 жыл бұрын
Do you have a link to the carbon fiber front lip you have?
@5daycars2 жыл бұрын
Hi Ben, yeah, it was on AirWing. com
@ko53955 жыл бұрын
nice. where did you get this grill from
@5daycars5 жыл бұрын
Amazon has them now. Just search for your year and model specifically and then "black diamond AMG grille"
@Azaad19563 жыл бұрын
Chase Kisling hello where did you buy the rocker panel insert. Thanks
@ronaldosabbagh8992 жыл бұрын
where did you get your carbon fiber front lip ?
@5daycars2 жыл бұрын
Hi Ronaldo. Got it on AirWing. com
@stevenr52803 жыл бұрын
Hey bro could use some more advise if you can help me.
@5daycars3 жыл бұрын
Sure man what's the issue?
@user-zg2kj4fq6v3 жыл бұрын
Do i have to remove bumper to remove headlights??
@5daycars3 жыл бұрын
Yes, in order to remove the front headlights, the front bumper must come out. There are screws/bolts behind the bumper. Thanks!
@sadiqaja39752 ай бұрын
Please is this 18inc rim or 19??
@5daycars2 ай бұрын
18 👍
@EnthusiastCarHangar2 жыл бұрын
Do you still own the W212?
@5daycars2 жыл бұрын
It's in the family still but not at my garage, which is why the lack of content on it.
@richardsmith39193 жыл бұрын
Will this work on cls w218?
@5daycars3 жыл бұрын
Not sure but it should be very similar. I didn't know it would work until I did it 🤣
@richardsmith39193 жыл бұрын
@@5daycars I gave brought the grill but very nervous to change it as I've just resprayed the bumper and don't want to scratch or damage anything.
@scott43254 жыл бұрын
Do you still have this
@5daycars4 жыл бұрын
Yes I do.
@simonwalker24603 жыл бұрын
This guy does not show you him taking the grill out with the bumper on😂😂i wonder why
@5daycars3 жыл бұрын
You think I took the bumper off... Removed the grille... Re-installed the bumper... Shot the video... Then installed the bumper... Put the new grille in and then re-installed the bumper for a second time?! Genius. You just be a genius.
@simonwalker24603 жыл бұрын
@@5daycars yep😂😂😂😂
@tonymontana84473 жыл бұрын
I wouldn’t recommend this unless you I want to break your clips on the original bumper