One small comment, if I may. I believe that there is even an easier way to find out if the vehicle is equipped with the Lambda (or O2 sensor): On the driver side (on LHD) look for the X11 port, open it and if the number 2 and 3 ports are empty then you don't have a Lambda/O2 sensor. Great video.
@mercedeske5 ай бұрын
👍🏻👍🏻👍🏻
@asineprestanou52215 ай бұрын
Hello, what of my car have cat and lambda, but my lambda is disconected and there is no cable from ecu. I think that somebody swap exhaust for cat version with lambda, but does not connected lambda.
@asineprestanou52215 ай бұрын
And on my x11, i have port 2, but not port 3
@danricci69965 ай бұрын
@@asineprestanou5221 Like the man says, look at the ECU and see if pin 8 is hollow than you don't have a Lambda and your car didn't came with emission control devices (cat + Lambda )
@mercedeske5 ай бұрын
@@asineprestanou5221 No lambda then.
@keremerkan87905 ай бұрын
Hello, where else can we measure the lambda sensor other than the x11 socket. I need to do a carbon adjustment over the voltage. Thank you in advance for your reply.
@mercedeske5 ай бұрын
Hello. X11 port only. There is a more expensive option - exhaust gas analyzer. Anyway, lambda is being replaced, can not be repaired replaced it each 50k km and you will be calm.
@vmlelectronics5 ай бұрын
Hi! I became confused; so to have the lambda you need to have 4 and 8 or only having contact in 8? the # 4 is for what? Thanks!
@mercedeske5 ай бұрын
Hi. Pin4 is always blank, for all of them. Number 8 is blank for those who don't have lambda!
@vmlelectronics5 ай бұрын
Ok, now I understood!!! Thanks so much!!!@@mercedeske