Mercedes Sprinter camper van window install

Рет қаралды 114,370

7 жыл бұрын

Mercedes-Benz Sprinter camper van window install. First step in DIY conversion to a camper van. See the complete write-up at: ourkaravan.com/windows/
Mercedes Sprinter CR Laurence Windows:
Driver Side Forward T-Vent Window (144 or 170): goaff.pro/acfrzb
Passenger Side Sliding Door T-Vent Window (144 or 170): goaff.pro/vpvdrv
170-Only Driver Side FIXED Middle Window: goaff.pro/fwmfem
170-Only Passenger Side FIXED Middle Window: goaff.pro/ekiyce
170-only Driver Side Rear T-Vent Window: goaff.pro/cviogb
170-Only Passenger Side Rear T-Vent Window: goaff.pro/swkmwq
144-Only Driver Side Rear T-Vent Window: goaff.pro/zxpimj
144-Only Passenger Side FIXED Window*: goaff.pro/txyjtr
*T-Vent not available for 144 passenger side REAR due to conflict with sliding door
Ram ProMaster CR Laurence Windows:
Driver Side Forward T-Vent Window: goaff.pro/crikeh
Passenger Side Sliding Door T-Vent Window: goaff.pro/wtkdim
Ford Transit CR Laurence Windows:
Driver Side Forward T-Vent Window: goaff.pro/tybqqz
Passenger Side Sliding Door T-Vent Window: goaff.pro/swcrae
Tools used:
Bosch jigsaw (newer version of mine): amzn.to/2ks4006
Fine tooth jigsaw blades: amzn.to/2krNEV8
Website: ourkaravan.com
Instagram: our.karavan
MUSIC:
Soul by Dj Quads / aka-dj-quads
Note: This video contains affiliate links for which I may be compensated. Please know we only promote products we actually use and believe in.

Пікірлер: 77

@TresMamboMusicSchool 7 жыл бұрын

Well done, this and your other fit outs. It's great to see someone calm, relaxed and leaving no detail overlooked. So rare these days to find a "do it once, do it right" attitude. Your finished Sprinter will be pure joy I'm sure. Keep up the great work !

@grahamerobinson9463 7 жыл бұрын

Following from the UK - thanks for the updates

@Doggonewood 7 жыл бұрын

Your videos are awesome. I just got a 170wb sprinter and it's all factory. The ideas are coming. Thanks!

@far574 7 жыл бұрын

Looks incredible! I don't like after market windows but these I would do. I'm possibly looking into getting a sprinter and converting it. I'm a new follower and can't. Wait for updates!

@alexk.6530 7 жыл бұрын

You made it look so easy and fast oh it was a fast forwarding 😜 Thanks for the video it was informative

@dalesnale 7 жыл бұрын

Looks great. Lover the lower flip outs for ventilation. That's courageous with only 46 miles. Haha. More holes to come now that you've broken the 'ice' . Looking forward to following the build. Dale

@L4WNY.. Жыл бұрын

Aww, I remember when mine had 46 miles........281,000 miles later I'm now adding windows 🥳

@ourkaravan Жыл бұрын

Nice!!

@ryanbecky4457 7 жыл бұрын

The window looks great! We'd love to swap one of ours out with something similar for better ventilation.

@ampload 6 жыл бұрын

Oh yeah Ken and his Van is the BEST Build that I have seen... I have seen a thousand builds.. But Kens is the best 1# by far.. only thing I would do different is maybe a aluminum frame bed with a hinge so it can go into ( couch mode ) during the day.. Talk about a Perfectionist Kens all that and more.

@thelolguy007 7 жыл бұрын

great job

@croberto9096 7 жыл бұрын

Great job. I started the planning phase for a 4x4 with flares (pop-out) on the back for better positioning of the bed. Curious what you have planned for the roof (rack, solar panels, etc.)

@Tophr_MCOC 7 жыл бұрын

Hi Ken. I'll be following along with your build. I'm in the process of planning a build myself. Good luck! Looks good so far.

@markmcdonald8973 7 жыл бұрын

Hi Ken, I'm looking at starting a Sprinter conversation now that 4wd is available. I'm interested to know what options you found were best for doing a conversion. I'm specifically interested in how you attach seats and if they're "legal" for highway purposes. My inclination is to go with a Cargo van, however I'd like to add four additional seats for our kids. Are you using a Webasto for heat, and if so, are you installing it yourself (I've heard some people say they'll void the warranty unless you use one of their installers).

@markmcdonald8973 7 жыл бұрын

I'm concerned about the heater warranty. Mind if I ask where you're getting the seat? That's one of my issues. On a sprinter forum a few months ago, people were going back and forth as to whether it was "highway legal" and if the driver could be ticketed for it since it's not factory seats. I'm in the same boat as you though, factory seats won't work for mine and I'd like to do something a bit more custom.

@colleenmendoza1344 5 жыл бұрын

Cool music!!!!

@nickwhitbread4010 7 жыл бұрын

Hello, I just got my window and am trying to figure out the clamp ring ? Do you have to drill holes in the small recess to clamp it together? No one talks about this step. Any info would help. Thank you

@TheHollyDaisy 6 жыл бұрын

Great video Kenetube! I have been following your build and you are an invaluable resource. Question, when you used the jigsaw from the outside, did it just cut straight through the vertical supporting bars on the inside? I was unsure when those got trimmed.

@adamrodriguez8431 7 жыл бұрын

Where did you get the window?

@Josh-wj2jm 7 жыл бұрын

Enjoying all the videos of your build so far and taking notes for a future build. What is the name of the van color? Its beautiful!

@andyericksonAKAjobo 7 жыл бұрын

you guys glossed over the actual fitting/install of the window.

@scottmead8419 6 жыл бұрын

When you initially drilled the holes before you cut, did you just drill based on the inside lip of extra steel or was there a template you used to determine where to drill the holes? Very nice work!

@atomicsmith 7 жыл бұрын

Did you mention where you ordered your window from?

@nickwhitbread4010 7 жыл бұрын

Great video. Were you using a scissor tool or a jig saw ? and where did you buy the window ? Thank You

@johnnolcox8768 7 жыл бұрын

Can you link to the window you found so I can source one as well please?

@dbarnell5930 7 жыл бұрын

Hey Ken, great video's so far. Keep up the good work. What was your purpose in selecting the short body van. Why not the longer version?. Your thoughts on that would be great, thank you. Dwight

@dbarnell5930 7 жыл бұрын

Ken, Thanks for all of that. I am looking forward to riding along with your you-tube progress. Thank you again.

@neoyum9699 6 жыл бұрын

I need to buy a jigsaw. Do you think the corded is better than the cordless? Is there more power & less weight on the corded for easier of cutting curves into car metal?... Would cordless do the job? - I am on the road & can more easily get power to a cordless tool. But, I’m happy to buy corded if necessary. 🙂

@neoyum9699 6 жыл бұрын

Thank you SO much for this - and other - quick & helpful replies. ☀️👏🌻

@jimdearborn2539 6 жыл бұрын

Hi Ken, Wow, great content. I think I have viewed all of your Sprinter videos. Well worth purchasing all of my parts from your site store. My daughter and I are about to begin a conversion. We just ordered a new 4x4 and couldn't find OEM installed swivel seats. Do you have the order code you used? Production starts in two weeks, maybe they will accept the change order. Thanks, Jim

@jimdearborn2539 6 жыл бұрын

Thanks Ken. One more question. I like your electrical setup but would like to have a shore power option. Have you figured out the wiring option for that? Please share if you have.

@mtforger 6 жыл бұрын

Hello Ken - great videos! Say, I know its been a while, but regarding your CR Laurence T Vent window behind driver - do you have a number? Reason I ask is, I see a few listed and it looks like yours is a DUAL T Vent. I have a 2011 144 and would like to add that exact window, but I don't see it listed for my model year. Thanks!

@mtforger 6 жыл бұрын

Thanks Ken...appreciate the quick response!

@AdrienRenaud 7 жыл бұрын

Great job! Where did you purchase the window, specifically? I've been looking at Amazon, but there are no model numbers or specs, so I'm hesitant to buy.

@mgmatiasek 6 жыл бұрын

I just picked my window up there! Small world!

@ducaclaus 7 жыл бұрын

very good video, i will buy the same van.. i m looking your video from idea and suggest!!!when the new video?

@joestone8094 7 жыл бұрын

looks fab I have just purchased a sprinter van 2013 and going to convert it.

@wanderlibre4434 4 жыл бұрын

Hi Ken. Stumbled onto you KZfaq channel / website a couple of months ago and have found your blog and vlog posts very helpful. I noticed you mentioned in a later post that you had some problems with CRL customer service (I believe relating to a fitment issue with your T-Vent. Correct?). That said, I'm trying to decide between the CRL T-Vent and AMA screened Half Slider and wanted to get your feedback on the CRL T-Vent now that you've been using it for quite some time. Any issues with the vent opening / closing? Any other quality or fitment issues worth pointing out? Would you purchase the T-Vent again or go with a different mode / manufacturer? Any feedback you can provide on CRL and the T-Vent in particularly would be very helpful. Thanks!

@ourkaravan 4 жыл бұрын

Hi, the quality of the window is not great. The two panes in mine don’t align perfectly and it really bugged me at first. But that said, I’m in Colorado right now in a thunder storm with them open and no bugs or rain can get in. While the AMA are likely better quality, I don’t believe they are screened and would let rain in. For those reasons I would go crl again despite the so-so quality. Something to think about. Take care!

@wanderlibre4434 4 жыл бұрын

ourkaravan Thanks! Helpful to know. We were having a tough time deciding between CRL and AMA for the front. Ended up going with CRL. Because of your comments about their customer service, we went through Van Windows Direct as we were impressed with the help they gave us before even ordering the windows. Thanks again!

@ourkaravan 4 жыл бұрын

That’s great, good customer service is key!

@wql1 7 жыл бұрын

Ok ... definitely gonna follow your build!!!

@picflight 5 жыл бұрын

You cut two supports, did you have to add any reinforcements?

@ourkaravan 5 жыл бұрын

Nope, this is exactly where the factory glass goes as well. The window has a clamp ring that provides some support.

@dingbatjack1234 7 жыл бұрын

Where did you buy the window from? Subd. Request. Post the prices and retailers you used. Cheers

@mgmatiasek 6 жыл бұрын

couple posts up, VanCo in Sacramento, CA

@12vwiz15 7 жыл бұрын

What an excellent build you have! New subscriber :-) I was curious if the aftermarket window you're using can have the glass panels replaced from exterior, or when finishing interior will access to frame be necessary If you have broken glass? Thank you!

@2009yale 4 жыл бұрын

Where can you buy the window?

@ourkaravan 4 жыл бұрын

Hi, here is our complete how-to article: ourkaravan.com/windows/ and the sources are all linked. Good luck and enjoy!

@donnahague8983 6 жыл бұрын

How scary is that to cut out for a window LOL...we are getting ready to do this also...

@MLA.. Жыл бұрын

End up with a pretty jagged edge drilling 100 pilot holes. Lol

@ourkaravan Жыл бұрын

It's an easy way to transcribe the interior template to the outside for cutting.

@taylorlinkfield4556 6 жыл бұрын

I love your videos! You're so cute and smart! Was there any adhesive used? How does the window stick in place? Cheers!

@NicholasLittlejohn 5 жыл бұрын

no replies, wow

@ourkaravan 5 жыл бұрын

All of my replies were deleted when the channel was renamed a while back. I wasn't aware that would happen.

@zwiedzamyespana_mmbus1587 6 жыл бұрын

Mega filmik 😀👍 Like Zapraszamy do nas 🌹👍

@engchoontan8483 Жыл бұрын

That is what panels of panel-vans are for - hack-mod

@ourkaravan Жыл бұрын

agreed. :)

@bitcanics6892 5 жыл бұрын

is that the grey blue color?

@ourkaravan 5 жыл бұрын

It is graphite gray

@BAHRAMCR 5 жыл бұрын

Oh my, you are cutting a brand new van !

@ourkaravan 5 жыл бұрын

Indeed, but 2 yrs later and I haven't ruined it yet!

@shellducker7078 3 жыл бұрын

Music annoying but good install

@mirafelizav.hernandez8341 3 жыл бұрын

That was way too fast wasnt help full. Didnt say how they mount it and what silicone for sealer to used.

@ourkaravan 3 жыл бұрын

No silicone was used, and in fact you should never use silicone on a vehicle. The acid in silicone will etch paint and eventually cause rust. The CRL window has a rubber gasket on the back and once the hole is cut the only thing left to do is use the provided screws and screw it down. There isn’t any more to it.

@JakeRuby 7 жыл бұрын

Why didn't you just get a van with windows? Obviously you have $$$ Seems a bit odd...

@spongebobsquaretits 7 жыл бұрын

shows about 8 seconds on the actual install !!!!

@azamatsmith 7 жыл бұрын

Did you add any weather stripping

@mgmatiasek 6 жыл бұрын

How much did you tighten the screws? Was that an impact driver? thanks for the great vid!

@mgmatiasek 6 жыл бұрын

kenetube thanks again!

@DARKMATTERTIME 5 жыл бұрын

That's why dislike

@ourkaravan 5 жыл бұрын

It was my first video guys, they are more detailed now.

@kevbrackley8445 5 жыл бұрын

That is definitely not how to cut a hole in a van! All those metal cuttings aagggh

@ourkaravan 5 жыл бұрын

This was my first project on the van and I learned first-hand that those metal shavings go everywhere. I was able to pick them all up with a magnet, but in my later videos I become a strong advocate of putting sheets over the wall cavities and controlling where the metal scharf goes!

@emmcey 4 жыл бұрын

Ever heard of a vacuum?