Mercedes W212 | Brake Fluid Replace / Flush Complete

Рет қаралды 3,899

MB212

13 күн бұрын

How to replace brake fluid for Mercedes-Benz E-Class W212 models

Пікірлер: 31

@therthondaniel372 11 күн бұрын

The puppy should be the channel mascot!

@manualgarage 6 күн бұрын

Great video, looking forward to the reverse camera retrofit

@lipar94 2 күн бұрын

Truly enjoy your approach. Wish more cars were maintained the same way. However, it worth mentioning that the brake fluid level now should be adjusted on next break pads change since the max level is for a new set of pads. Otherwise after change the fluid will exceed the max level.

@MB212 3 сағат бұрын

Thanks, is interesting to learn all the right procedures and repairs. Good tip I need to check it when I replace the pads!

@ynte8114 11 күн бұрын

Thanks for the video, keep up the good work man 🫶🏻

@MB212 11 күн бұрын

Tools used in the video. Brake Bleeder - amzn.to/3KSZv7G Fluid Extractor - amzn.to/4bdfCYG Wrench 11mm - amzn.to/3VNUnYT Floor Jack - amzn.to/3VPdh1t Impact Socket - amzn.to/3z7l7uy Brake Fluid - amzn.to/4csgw4n Wheel Stopper - amzn.to/4cq0doQ Impact Wrench - amzn.to/4c2MXGS Torque Limiter - amzn.to/4enb2d0

@yotambien2664 11 күн бұрын

I have to do the same in my w212 this sumer. But with the opposite system: applying vaccum in the calipers. Thanks for tutorial.

@MB212 11 күн бұрын

Should work good also that way, you have car lift? I did thinking about it with car lift this is a 15 min work kinda ☺️

@ZakiGarage 10 күн бұрын

Just got one of these bleeder tools recently makes the job a lot easier. Great vid

@MB212 10 күн бұрын

I checked your video before I did this, and it seemed to work good also with suction, but I guess this bleeder tool is bit more convenient.

@BionicRusty 11 күн бұрын

Great timing. 😁 Only got this to do to complete the service. Your cabin filter video was perfect. 👍

@MB212 11 күн бұрын

Glad video come to use 👌

@cjlomax2156 11 күн бұрын

Love seeing the puppy - My Labrador would do the same hoping we'd go to the dog park when I was working on the car. Excellent Vid Bro!

@MB212 11 күн бұрын

Yess that’s for sure ☺️ thanks.

@TheTurbinator 9 күн бұрын

What about bleading the fluid from the ABS pump too? This would have been a perfect plug for that new car scaner sponsorship.

@amatsiuk 11 күн бұрын

Nice job

@frankbuick65 9 күн бұрын

Gör dom så noga på orginalservice tror du? Eller byter dom bara i behållaren? Vilka små framskivor du har btw 😁

@paulwalsh4236 9 күн бұрын

Where did you buy the kit from

@AlexAndreiZAR 11 күн бұрын

good video! why did you work outside if you have a garage? it's not safe to raise a car on a jack that is on wet ground/mud...

@MB212 11 күн бұрын

Good observation. Garage is narrow so is hard to make such kind of videos, therefore I like to make them outside. But is true is not totally safe jacking car up at such ground.

@AlexAndreiZAR 11 күн бұрын

@@MB212 get yourself a sheet of 5mm metal and have the jack go on top. That will apply even pressure on a big enough surface. Try and bring some gravel and pour over it some concrete. It should cost that much for a 4x10 meter surface.