Mercury Verado 300 V8 I 300 Hour Full Outboard Service How To: DIY at Home

No video

Mercury Verado 300 V8 I 300 Hour Full Outboard Service How To: DIY at Home

Рет қаралды 34,145

Күн бұрын

Hey Everyone! Heres a quick breakdown of a Mercury Verado 300 V8 300 hour service I performed at home on my lift! Getting maintenance done at the marina can be super expensive and even take forever to get an appointment to get it done. Just wanted to show you guys how I did this from home and how its possible. Definitely some learning and things id change for the next service but overall a quick and easy process! Thanks for watching and make sure to comment below with any questions etc you have with the service! Good luck ! mercury v8 | 300 hour service
Tools Needed:
-Needle nose pliers
-1 1/8 socket
-1 1/16 socket
-5/8 in wrench
-14mm deep socket
-8mm socket
-Flathead Screw Driver
-10mm Socket
-1 1/8in socket
-Old knife
-Oil filter wrench
-3/4 in wrench
-Mercury Tools listed below
-3/4 in wrench
-Hose clamp
PARTS USED:
300 Hour Service Kit- www.partsvu.co...
Flywheel Belt Stretch Tool: 91-8M0146862
Flywheel Tool: 91-8M014686
#mercuryverado300 #fullservice #howtomercury300hourservice

Пікірлер: 36

@liquidambition Жыл бұрын

Thanks for watching yall! If youre looking for a 100 hour full totorial check out my other video here! kzfaq.info/get/bejne/h8BdmrmKrLirno0.html

@edroberts5126 7 ай бұрын

You are a brave man to do that over the water. Great job, also love your house.

@liquidambition 7 ай бұрын

It definitely wasn’t easy! lol appreciate it though

@johnethell436 2 жыл бұрын

Can you post a video on resetting the maintenance hrs on the gauges?

@liquidambition 2 жыл бұрын

For sure!

@joshcapecod6098 2 жыл бұрын

good stuff. but you missed the struggle single handed putting LU back up. i was looking forward to seeing that solo. also may want to mention torque specs, some folks w/o experience may think tighter is better - not always the case! personal preference I use a paint pen dealer style. the dealer tech i copy their practice and mark hours/date on therm, water sep, water pump (outside of case) ,oil filter.thanks again!

@liquidambition 2 жыл бұрын

Ya the struggle was real esp doing it on a floating dock lol all in good effort tho

@tristanschaper281 8 ай бұрын

What’s the trick for reinstalling the lower unit and getting the shift linkage to line up? Does it just align on its own? Nothing to do?

@liquidambition 8 ай бұрын

Yes it does. It should just slide right back in.

@rod272727 2 жыл бұрын

is it possible to change the engine oil through the dipstick with a pump like the previous verados?

@liquidambition 2 жыл бұрын

Yes it is with a pump

@francoiskrafft1700 2 жыл бұрын

Fabulous job. Well done. What would you do to decrease the engine noise by 6 Db as my Verado V8 300hp did not pass the noise test here in Switzerland and the Swiss dealer does not want to tell me his trick unless I pay him a fortune :( I was thinking to use special sound damping material from the automotive industry and put it under the top cover. But I read that most of the noise is from the low part… any clue or free space I could insert some noise damping material without altering ventilation?

@liquidambition 2 жыл бұрын

Thank you very much. Are you running in sport mode? If so that will create a higher decibel

@francoiskrafft1700 2 жыл бұрын

@@liquidambition nope in stealth mode…

@mattyfishes_5808 11 ай бұрын

Those verados are fairly quiet already

@MarksApartments 2 жыл бұрын

You should contact Mercury about that flaking paint on your lower units; mine were the same and they replaced all 3 under warranty

@liquidambition 2 жыл бұрын

Ya I actually did the same! Took a few month get them but Mercury replaced both which was awesome! Thanks for the advice! Appreciate it

@panagiotisvlachos-xm2gt Жыл бұрын

Dear Mark , Do you have contact details , email etc?

@liquidambition Жыл бұрын

The local merc service center submits the claim. You have to take it in

@rafaelechemendia7087 2 жыл бұрын

So what are your overall thoughts on the V8 now that you have had them a while?

@liquidambition 2 жыл бұрын

They are solid engines. I have had a good amount of warranty work needed to be done though. It may be the 19s since it was the first year released

@Mike-hs8fq 2 жыл бұрын

Did you use anti seize on all the bolts for the thermostat, and alternator belt?

@liquidambition 2 жыл бұрын

I spray down everything before install typically yes

@robgrundwald 3 жыл бұрын

The belt removal tool is unnecessary. You also don’t need to unbolt anything other than the the alternator (what you called the motor). Once the 4 alternator bolts are off belt slips right off. Saves you $50 for that stupid useless piece of aluminum.

@liquidambition 3 жыл бұрын

Can do it either way. Thanks for the note

@joshcapecod6098 2 жыл бұрын

i should have read this first dam

@jefflundstrom6878 Жыл бұрын

Do you still need the belt tightener tool? Thanks for adding this, saved me $50

@Mike-hs8fq 2 жыл бұрын

Bluewater great video. Do you have the part numbers for the two tools? Why is the paint coming off your motors? They look fairly new.

@liquidambition 2 жыл бұрын

Hey thanks!They should be in the description below. The paint was a factory failure from merc. They are actually replaced the lower units and spacers because of the failing paint

@Mike-hs8fq 2 жыл бұрын

@@liquidambition Thanks so much!. I have the same paint issues including the brackets that mount on the transom.

@liquidambition 2 жыл бұрын

Yes same. If under warranty take it to a dealer they should replace. I’ve been waiting months but they are on order

@jeffsanzone321 2 жыл бұрын

What size socket did you use for the spark plugs? I found that I’ll need a thin wall socket because mine are too think to fit inside the spark plug hole.

@michaelpaul377 3 жыл бұрын

vog.fyi bonzer

@liquidambition 3 жыл бұрын

I don't understand but I hope this helped!

@tim6986 5 ай бұрын

WRONG part #, this kit is for the non verado. obviously it overlaps, we watched you do it. but the correct part # for verados 2B529482 and up is 8M0149932

@liquidambition 26 күн бұрын

Thanks.