Messerschmitt BF110 Eduard 1/48. Battle of Britain. Building and painting

Рет қаралды 71,953

Күн бұрын

In the chapter IV of The Battle of Britain serie I show you the legendary BF110. During the battle it was used as large range fighter but its poor manoeuvrability in dogfight combat against Britain fighter has as a consequence a high number of casualties. I hope you enjoy watching this video…please, leave you likes and comments!

Пікірлер: 75

@murraykriner9425 2 жыл бұрын

Very well executed model. Now I'm beginning to fully comprehend just how these kits demand so much expense these days with all the cockpit interior pieces they provide for detailing. When I first started in this craft everything extra was fabricated from bits and bobs, or the sprues that were heated, stretched and formed to make all the conduits for controls or wiring. Beautifully done kit.

@stevenpuderbaugh821 3 жыл бұрын

I'm impressed by the artful painting of the cockpit! Wonderful panel line effect. Not too much heavy weathering. Very attractive result.

@falconxlvi 3 жыл бұрын

Nice work- this is a tough one and you did a great job. I liked the epoxy putty for the nacelles. Good idea 👍🏻

@sergeantfloffy1248 4 жыл бұрын

Amazing detail in the cockpit and I love the finish! 😛

@TurbineModels 4 жыл бұрын

Thank you!!!

@realdaneben6512 4 жыл бұрын

all done with the Ultra from Harder Steenbeck... it's a very good airbrush and you can tune it with the infinity needle cap for even smaller detailing.

@makakson 2 жыл бұрын

Thanks for this video. I have this one on the shelf and it was next in the build queue. But after watching your vid I decided to skip it for a while and go for something with a little less putty required ;)

@nohabs 4 жыл бұрын

Good grief... every time I see a beauty like this I want to get one too. Very well done.

@TurbineModels 4 жыл бұрын

thank you very much!

@davidharrington1133 10 ай бұрын

Super detail painiting, I built one of these already but I have asecond one so might try this scheme. Good job

@jackbablin7863 4 жыл бұрын

Magnifique. C’est vraiment du très beau travail. Continuez à nous faire rêver.

@TurbineModels 4 жыл бұрын

Thank you so much!

@allgood6760 3 жыл бұрын

Awesome 👍

@williamcarey8529 4 жыл бұрын

GREAT WORK!! NOTHING SHORT OF EXCELLENT!!

@TurbineModels 4 жыл бұрын

Thank you very much! And happy new year!!!

@williamcarey8529 4 жыл бұрын

@@TurbineModels Happy New Year to you as well!!

@ramonperedo2751 4 жыл бұрын

Ohh great and nice job on this lovely and beautiful aircraft, specially in this version that was clean as a heavy fighter, for one reason it was Goering's favorite airplane. A brief comment and suggestion, in minute 9:36 that gap has to be there because that part was the flap of the wing and had that space including the wheel cover. :)

@TurbineModels 4 жыл бұрын

Thank you Ramon, I will take into account your tip next time. Thank you for your coment!

@ramonperedo2751 4 жыл бұрын

@@TurbineModels ohh you are welcome. Yes I wait with great excitement your next proyect. There are still a lot of great planes from this Battle of Britain series, such as Do-17, Ju-88A-1, Paul Bulton Defiant, also italian fighters like Fiat G50 and CR42. Greetings!!!

@roopeshkrishna34 4 жыл бұрын

Excellent work..!!

@TurbineModels 4 жыл бұрын

Thank you

@-sailboatmodel 4 жыл бұрын

Hello! Good scrupulous work. Beautiful model.

@TurbineModels 4 жыл бұрын

Thank you so much!! :)

@kitbi9368 4 жыл бұрын

Your artistry is excellent, however I feel I should comment on the 'gaps'. The fuselage of the 110, like its stablemate the 109, was built in two halves and then assembled, leaving a very distinctive seam along the spine and belly. The junction of the engine nacelles and the flaps is also quite distinct because the flaps have to be able to move down whilst the nacelle is fixed in place. As depicted they cannot move.

@TurbineModels 4 жыл бұрын

Thank you!. I will take into account next time

@omerashraf9357 4 жыл бұрын

@@TurbineModels Check out my instagram omerdraws.xx

@kevinfredericks3237 4 жыл бұрын

Exactly. Was going to be my only suggestion. Especially liked the idea of stretched sprite as a gap filler. Good option especially for larger gaps.

@sarahrietzbaena9398 4 жыл бұрын

Finally another video!!

@TurbineModels 4 жыл бұрын

😀

@TheRealHawkeye 4 жыл бұрын

Thanks for sharing with us! I have one constructive remark. At 10:00, the seam on the flap should be filled. The seam is right under your left pointer finger's fingernail. The Bf-110 had a slotted flap (meaning the entire flap extended), not a split flap. Nice work on the painting and weathering though! I look forward to building the 1/48 Bf-110D from Eduard soon.

@TurbineModels 4 жыл бұрын

Thank you so much. I know, the flap was wrong :). I promise take into account the next time :)

@fasold2164 3 жыл бұрын

When the aircraft was on the ground, the (spring-operated) slats were always extended. This is a flaw of almost every Bf 110 kit.

@darkknight1340 2 жыл бұрын

A well executed build,what stencils did you use for the shark mouth and Balkan kreutz markings?.

@unclemike3056 4 жыл бұрын

Hello Good job. What do you use to remove excess of white putty with Q-tip ? Bonjour d'en France.

@TurbineModels 4 жыл бұрын

Thank you!!. I remove the excess with acetone

@Mediavidero 4 жыл бұрын

Good job! Would you show the name of music themes used in this video?

@TurbineModels 4 жыл бұрын

Thank you!, this time I used the free youtube library, songs are: listen to the radio Above planets Cats and gats Alaska Sky

@rogerhoward3527 4 жыл бұрын

In one of my favorite books called The Greatest American Fighter Pilots of WW2 I read that Col. Scott flew against German Me-110s in China, I wanted to know if they had German or Japanese markings on them?

@rotvikbenn7137 4 жыл бұрын

This is some bulshit (sry) Germans Luftwaffe don´t fight in China. And Japan have Ki-45 and other. (sorry for me verry bad english) Original CZ : je to nesmysl ,Luftwaffe nebojovala v Číně a Japonci měli své letouny, například Ki-45 .nebyl vůbec žádný důvod pro přítomnost Bf-110 . Americké ,,dokumenty " a bohužel i hodně knih jsou plné podobných nesmyslů.

@mk45316 3 жыл бұрын

What battle was that? I don't remember the Germans fighting in China.

@simonbaker6962 2 жыл бұрын

what brushes do you use?

@marciotavares4 4 жыл бұрын

Excellant, i just would appreciate if you showed the plane a little bit more after finished, in more detail..

@TurbineModels 4 жыл бұрын

good feedback Marcio, I will try to do it in my following videos

@nikkireborn5923 4 жыл бұрын

Interesting post-shading

@HODCHANNEL 3 жыл бұрын

you were the one person that didn't get a reply from turbine models

@Ralle1968 3 жыл бұрын

👍👍👍

@user-fd7hb5zr7k 4 жыл бұрын

Привет ! Хорошая сборка . Ни что так приносит удольствия жизни когда занимаешся любимым увлечением . А что за музыка не можете ли оставить на треки сылку

@TurbineModels 4 жыл бұрын

Спасибо большое! Я не говорю по-русски, я надеюсь, что Google Translator делает это хорошо. Вся музыка доступна на KZfaq бесплатно по этой ссылке: kzfaq.infomusic?nv=1

@wilfredmay5231 3 жыл бұрын

Never, never , never did the Luftaffe go to war in aircraft as dirty as you depict them.

@TurbineModels 3 жыл бұрын

Hahaha...ok Wilfred take it easy, it’s only a kit, not a real airplane 😂

@ronbennett6396 4 жыл бұрын

GREAT model, just one suggestion. The PFD looks too modern. Maybe that's the way the prototype looks, dunno. But it looks out of place.

@TurbineModels 4 жыл бұрын

thank you for your comment! but I dont know what PFD means.. What is out of place?

@ronbennett6396 4 жыл бұрын

Turbine Models PFD=Primary Flight Display. AKA artificial horizon, 8 Ball is what American pilots, especially Astronauts call it.images.app.goo.gl/J3A8nz4ENUbsFu257 In this pic there are two. One primary, one back up. Primary directly in the center, electronic, ( like a computer monitor ), and down and to the left of that, is the backup PFD. Electromechanical, AKA "Steam Guage", looking more like yours. See what I mean, a bit modern ? I'm going to see if I can find a photo, post the link here. I should think aircraft of that era would likely have a simpler PFD. Black background, white lines for the moving = --- v --- = bar, and two thicker white lines for the horizon lines. However, I'm not exactly sure. Here you go. images.app.goo.gl/T6UPYHxLk9AxYBQZA In this pic, the PFD is in the center, directly beneath the turn and bank indicator. ( The guage with the bubble level ) Or this one. images.app.goo.gl/Fd2HZ94N9s8FG6dp8

@davidmealing5457 4 жыл бұрын

Hi Ron... Likewise re PFD?

@K29Loki 4 жыл бұрын

Добрый день! Отличная работа! Airbrush h&s ultra?

@TurbineModels 4 жыл бұрын

спасибо !!! да это H & S ultra

@alfiemarsh1774 3 жыл бұрын

Do you build to sell?

@TurbineModels 3 жыл бұрын

Not usually, are you interested to buy one?

@narce160th 4 жыл бұрын

wow its a shame that the Eduard kit needed so much putty!!

@P4P5 4 жыл бұрын

It really is a shame. I was surprised he needed this much. I built BF109G-10 a month ago and only needed a tiny bit of putty at the nose. Eduard kit as well.

@TurbineModels 4 жыл бұрын

In my KZfaq chanel you can find a video about a BF 109 of Eduard where i didnt need putty...it is more related with model mould sometimes they are better than others

@Killsnapz 4 жыл бұрын

A friend of mine built this kit soon after it was released. He was extremely disappointed with Eduard with the horrible fit of what was a 100% new tooled kit. Its the only kit I ever heard him complain about building ever. Their Fw 190 D kit is similar in the fit of the fuselage halves and wings is horrible. Other kits they make are fantastic so you have to do your research when buying Eduard kits.

@tuberholic 4 жыл бұрын

Red meat for Spits and Mustangs!!

@carlosteran8114 4 жыл бұрын

but at night a real Monster......

@neilhaas Жыл бұрын

That's a turboprop plane

@neilhaas Жыл бұрын

🇩🇪🇩🇪⭐🌟🌠🤔☺️🙂🖌️👍🤗

@jeffleduc1398 4 жыл бұрын

Amazing build sir but I’m so disappointed in the kit.... all them gaps WTH Eduard?

@TurbineModels 4 жыл бұрын

Thank you Jeff!! The detail level is ver good but fitting is not the best in this model...

@brettpeacock9116 2 жыл бұрын

The Bf110 was one of their first kits after they changed from a limited run (cottage industry) to full manufacturer. I have their 110 E on the bench, now. And, from researching the Dragon 1/32 Nf 110C-7 kit, I found that the cockpit could be painted in 3 basic ways. Most C & D models used RLM02 as base, Sone received RLM66 repaints above about elbow level when the change to 66 was formally managed in 1949. The E models, many of which were unfinished Ds, were done in this fashion initially, then changed to overall RLM 66. I chose the two tone for my C, as it was for a North African based Nightfighter.

@plan4u56 2 жыл бұрын

Interesting to see that you Spent GOOD MONEY on a model with LOUSY Fit issues! The Nose, engine cowlings and anywhere else you didn't show us. Using EPOXY was a GOOD MOVE! I use Two part Automotive BONDO... To fill Canyons, Fissures, same as epoxy two parts but BONDO once mixed you have about 20 minutes to shape sand flush. Then it gets harder than a rock. At that stage it's still can be sanded ,though takes a bit more time.. Point of my statement is.... Eduard, Tamiya, ICM, Hasagawa, Great Wall, Trumpeter and many other model companies Charge us BIG BUCKS you would think we'd get Perfect Fitting models but NOPE! I thank you for showing the fit issues with this model. Yes it is a good kit, the truth about it before I buy it is appreciated. Blessings Darrell Killingsworth

@georgeclarke2790 4 жыл бұрын

Yet another good video spoilt by awful, music. Why do you do it??

@TurbineModels 4 жыл бұрын

🙂 what kind of music do you like George?

@jamesjack1384 4 жыл бұрын

George Clarke turn the volume down.

@rossmunro7084 4 жыл бұрын

So much use of filler for a poorly fitted part. Dry fit. then sand to find a better fit. With all the bad fits the final model will not be accurate. sorry

@TurbineModels 4 жыл бұрын

Ross, have you built this model?