Great video Neil! Spot on about the right to repair and how manufacturers can actually make those screens to help owners, not limit them!

If I ever won a lottery I'd buy one in a heart beat. I'm just starting a small business . I build my own tools!

That is the best review I have seen on one. I want one so bad.

Can't wait to get one out on my rental fleet. Kubota definitely sets themself apart with Hydraulic over Hydraulic controls and a fold up door. Hopefully they never get away from that. But I can say if they would, they should consider building extra models Like a Deluxe models with those electric controls to meet that demand. Kubota really doesn't many skid steers in there line up compared to other Brands. They build a ton of different models of tractors.

I love the fact that because it's under 75hp it's DEF-free, but is there a forestry mulcher that pairs well with the SVL75-3 without being underpowered?

Machines are built, but over time it is being a long-term development. A verry nice machine.

Great demo Neil!

Kubota did a fabulous job on the new 75's.There's a reason all other manufacture's compare there loaders to KUBOTA.There the gold standard.Takeuchi is not far behind.Just say'in.

Loved my 75-2

I have very little need for one of these, but I’ve wanted one for years. 🤷🏻‍♂️

Very nice kubota. Just wish I could afford them.

I shouldn't have watched this video, Neil. Now I want one! :)

Really appreciate pilot controls. I run them all day most days in wheel loaders, but my employer has an E/H CTL, and it's just a nightmare to operate. I've operated a few, from a few different manufacturers, but of those, the E/H (Cat and Wacker) were far and away the worst. Even Gehl, which has a steep learning curve and most people I've talked to find too jumpy I found VERY preferable.

Don't forget kabota insurance is fuckin amazing

Ummmm.....Neill....your music selection????? We need to talk😂😂😂

Sign me up Neil!!

Coming off a 323e, I noticed the drive power is definitely less on the 2023 75-2, like sometimes its just not going to make it, but auxiliary hydraulics is noticeably greater. The clunking front idlers can get annoying, hope they figured that out. Controller is noticeably better than my older deere, can move a quarter inch easily, deere isnt even close. Wish It had auto idle, would think any modern machine would have it. And the auto level needs a turn off switch, don't always want it, but I'm happy with the 23 75-2 overall, personally not interested in the touch screens on equipment, simple is best!

The roll up door not sure why everyone else went away from it but then I don’t mind it rattling away all day

I have the new svl75-3 its a smooth operating machine. Half the noise of the svl75-2. Mine had a issue with rear door leaking they put a new door on it and i can still see light through the seal.

I want one. Just need to convince the wife I need one (probably not going to happen). Careless Whisper

Great video with good information. You are a great interviewer and speaker. Who writes your script and how much do you practice. Do you have a blooper video, that would be fun to watch. Again, you do an awesome job and you have influenced my purchase of a SVL62-2. I love Kubota, and have three other machines.

Radio is standard on the enclosed cab option

I still don't understand why why Kubota won't make a small track loader like ASV and Bobcat or a small articulated loader like Bobcat. Its not like Kubota doesn't have the engines for them.

Too bad they won't produce a larger forest mulching machine to compete with ASV with 135 hp and 50gph high flow along with the components to protect the operator and machine in that environment. Kubota could make alot of money since ASV is "6000" units behind with a year of wait time. If Kubota had 3000 such machines sitting on the lots they would sell them IMMEDIATELY especially if they made them $15,000 cheaper than As which they should be at least anyway. How much is $110,000x 3000 for instance ??? 3 + billion I think without getting out some paper. I think they have dropped the ball . They could then also make whatever profit is on the mulchers , cutters and other attachments. Oh well.

Now that’s sweet

Kubota recommends kicking up the rpm on their DPF machines - will that make your controls more responsive?

Question what’s the price $new and any used ones

There’s a spot in the video where you say there’s no adjustment for response speed on the lift arm hydraulics. I just want to clarify that you don’t mean that you cannot gently lift or lower (or tilt) when the situation requires?

can you turn this like a z-turn mower. one stick forward and the other back ?? And you are right about DB's for a 3 DB change the volume is doubled

Neil another video said the SVL75-3 had open center hydraulics just like the SVL97. I think they meant closed center. But either way does the 75-3 have closed center hydraulics like it’s big brother (SVL97)?

Great review Neil, does it have an hour timer that you can reset manually like a trip odometer? Does it have any antithetical systems and or gos locator? Lost if them get stole in my area. Does Kubota plan on offering longer 0 percent apr than 36 months? Thank you

Little white tank under the fuel tank? How do I access the refill

Hey Neil, any idea how soon we might be seeing the -3 treatment on the SVL 65?

With the pressurized cab, can it be made hepa tight, like a sprayer tractor ?

Also what is control over control hydraulics? And is it low and high flow? Thanks

Be nice if you give out the actual numbers of everything that has been increased not just the %

Did they fix Dirt Perfects dirt funnel around the rear hydraulic rams?

Why doesn’t Kubota use the KSR from the wheel models?

What's the deal with the gating on the left stick? It looks like an EH gate. Pilot controls would, by default be rotated 45 degrees from square because in order to turn, you are slowing down one side, so moving straight sideways from full forward or reverse doesn't mechanically make sense. EH sticks handle this with software mixing that effectively creates semi-dead corner, where movement across the corner affects track speed, but the last 50% of movement in or out of the corner does nothing because at 50% stroke, one track is already calculated to be going full speed by the mixing program.

dose it have multiples job clocks what ground clearance

I own a svl75 2016 model which is absolutely fantastic but I'm wondering if the new models seal better than the old models as the cab leaks extremely bad dust and in turn the air conditioner does not work. Will Kubota be putting out a 97-3 and if so will it be a sealed One Piece cab

Curious how much costs over the last years model

What price range is that skid loader in? Great video Neil.

Messick's I know you're a Kubota dealer but what do you thank of the new CASE MINOTAUR™ DL550

I'm not sure if i like the fuel tank on the rear door.

How much does the reversible fan add to the cost?

Id have one if they didn’t fade 2 months after purchase

What is the current lead time from the time you order one?

how much ? 60,000 ?

How much does this unit cost?

Hernandez Karen Thompson Anna Hall Nancy

Who else now has careless whisper stuck in their heads?