Metal Buildings are NOT cheap!

Рет қаралды 16,286

Күн бұрын

Here is a breakdown of the actual cost of a 30x40 metal building.
This was up-optioned to 3 Garage doors, one man door, two small windows, 6 inch roof overhangs, 10 foot roof, and a 5-12 roof slope. We are still looking to add power, water, and insulation as time goes on. Subscribe and I'll keep this channel as updated as I can.

Пікірлер: 65

@canyonrunner331 2 ай бұрын

Straight to the point. No messing around! Thank you.

@MultiShopMatt 2 ай бұрын

No need to hide and make y'all wait

@hjandisuryani6181 Ай бұрын

jsislamsksdjsksjsjsansknmkkksjissjsjsinkjswskk

@hjandisuryani6181 Ай бұрын

mjz 1:43

@rodneymontgomerytv2276 2 ай бұрын

Thanks For Giving The Cost Off The Top 👍🏿👌🏿

@MultiShopMatt 2 ай бұрын

No problem 👍

@user-mm6xi3er5u Ай бұрын

Built a 24x30 pole barn shop, steel roof trusses at 10’oc. 6x6 posts with 2x4 infill framing. All in at $18,000. Includes 2 - 10x8 overhead doors R10 insulated, 1 3’ door, concrete slab, whole building has 7/16 osb on roof and walls. Also has 12’ side walls, 4/12 pitch roof. In addition, it has a 10’x24’ loft in the rear that is 8’ aff. I did all the work myself except grading the pad and concrete finishing. I did form and prep for the slab, finisher placed and finished concrete. Not bad for $25 a square foot.

@MultiShopMatt Ай бұрын

Not bad at all. I still want to do a "stick" walled building one day for more hand working stuff and a red iron one for bigger deep storage

@BigBuckGetter 21 күн бұрын

Make a video about it. Let’s see how it came out.

@jacobsalsbury2918 2 ай бұрын

Guys will see this and say “hell yeah”

@MultiShopMatt 2 ай бұрын

Hell yeah

@BradyMcCloud 2 ай бұрын

Hell yeah

@chumps7974 2 ай бұрын

Hellzyeah!

@branch_ranch Ай бұрын

Hell yeah! 30 x 40 is a great size and the bigger doors and taller walls is money well spent. Add Spray foam and a mini split and you'll be pimpin.

@JesusIsOneOfOne Ай бұрын

That's a house for way under 100k

@MultiShopMatt Ай бұрын

Yup. Especially if you find a place that doesn't need this much grading and tree clearing. But toss in plumbing in the concrete, some insulation and electrical and you can have the framing done in your own time.

@user-mm6xi3er5u Ай бұрын

Definitely not a house, a hot box. Only spray form insulation will keep this building reasonably comfortable. The black metal doesn’t help either.

@RearviewMirror-ij2pr 9 күн бұрын

There are couple of different effective ways to insulate. A friend of mine used panels with an airspace between the panels and the exterior. This added R-Value. When you walk inside you would never know you were in a metal bldg. He finished it and it is unreal.

@MultiShopMatt 9 күн бұрын

We got some basic panels up now for tool shelf holding, but GA summer isn't playing nice this year, haha.

@chumps7974 2 ай бұрын

Pretty cool. I would love to do something like this

@MultiShopMatt 2 ай бұрын

Only thing stopping you is a lot more money that you expected, lol.

@scott6809 26 күн бұрын

I'm in New England and needed a frost wall so my foundation was $15,600 and that incudes site work and prepped for a 2post car lift in 1 bay. It's a 26'x30 metal building like yours with a 10'x20' lean fully insulated $21,400. I needed it engineered for higher wind and snow load per local building code so engineer plan cost $1550. My driveway is millings/hard pack and came out to $5000.

@MultiShopMatt 25 күн бұрын

That seems to be about inline with what I would expect, especially with the extra steps you have to take in that climate.

@Trevrob303 2 ай бұрын

I want this shop

@MultiShopMatt 2 ай бұрын

For the low low price (not low) you can have your own.

@vlamberty6351 28 күн бұрын

Me too

@DD-uf2uo 2 ай бұрын

I think your dad (SECRETLY) built that for YOU. ✔️ Great Video too. .

@MultiShopMatt 2 ай бұрын

It'll hand-me-down eventually, but I want him to enjoy it for a long time before then!

@DD-uf2uo 2 ай бұрын

@@MultiShopMatt Great 👍. Enjoy your time with him and everyone else in your family.

@danielgonsalves5302 11 күн бұрын

What is the height of the side wall?

@MultiShopMatt 11 күн бұрын

10' walls, ~16' on the tall sides.

@rwind656 Ай бұрын

Thanks for the video and cost break down plus the other build vid. I'm just now looking at metal buildings. So far I understand there's tubular steel or red iron (and the latter can be welded on site or bolted together from a kit.) Questions, if you can spare the time, please? 1. Assuming you've built on a slab the way you have, what is the lifespan of this tubular steel construction, please? 2. And btw, did the concrete cost and any site work include labor? 3. Plus, were there other details we need to be sure and look at when comparing bids for the metal? Colored screw heads, for instance... What else in the world do we need to watch for that might be included as default in some companies but omitted and marked up in others? [ The reason I ask is that my friend just showed me a quote and had not noticed that there was a note at the bottom saying the purchaser would be responsible for renting or providing a LIFT! That is heavy equipment and should not be required for this type building, surely? ( I was told not until you get taller, 14ft walls, on tubular steel.) Your 10ft sidewall building was put up by a 3man crew and ladders! Plus it should be included in the installation which was supposed to be part of the quote! ] Thank you for the videos! [ And the dog petting video was a lovely break. Kudo's. :) ]

@MultiShopMatt Ай бұрын

So the slab was built the way that the building engineers from the building company told us to. I need to do another video this week where I point out the things they did on that and the building we liked over other companies, like the trusses and how they were different. They have a 20y warranty for rust on frame and walls. and we will be keeping it up, So we are not particularly worried about lifespan. More worried about storm damage than building failure. Concrete cost I listed was labor included. We paid xxxx for us to have a complete slab finished and done, so they came the day before and did final forming and poured the next day. As far as extra details, we had a pretty solid company so they didn't nickel and dime stuff like screws. I will say get the overhang/drip edge at a minimum. Ours also had a ridge vent at the rooftop. So that's nice as well.

@user-mm6xi3er5u Ай бұрын

Build a pole barn, not a metal building. Look up Diamondback Trusses from FL. They have distributors. I am in NC. Drove 2 1/2 hours to pick up a 24x30 pole barn package. Saved thousands over cost of a local company. Metal buildings are harder to insulate and finish. Pole buildings foundation are less expensive. Do more research into pole framed buildings, you won’t regret it. A know people that did the metal building route, some happy, some not.

@p4palmer687 Ай бұрын

I’m also located in Georgia. If you do not mind, what company did you end up using for your building?

@MultiShopMatt 29 күн бұрын

TOL Buildings (top of the line buildings)

@troyemmert5296 2 ай бұрын

What is the minimum interior height. I know you mentioned a lift and from what I read you need 12 ft clearance to lift a vehicle to full height. I'm currently preparing for a 30x40 with 3 8x10 doors and went with 11 ft walls. Is this overkill?

@MultiShopMatt 2 ай бұрын

That's basically what we did. "Stock" from this company was an 8 foot wall. We went with 10. If you look at the roof trusses, our peak is 6'3' higher than the 10' wall, with the horizontals on the truss kinda splitting the difference, so those are 12-13'. Should be more than enough for what we plan on doing. If you are working on more trucks and SUVs and taller vehicles, that extra foot or two may work better for you, or if you do extra pitch in the roof, you can get extra height out of your horizontal truss support.

@MultiShopMatt 2 ай бұрын

Just checked. 140ish inches to the bottom of the horizontal supports on the truss.

@rozzbourn3653 2 ай бұрын

im going with a 30x40x11 as well for a future lift. mine will have the 4 12 roof pitch though so the truss should be about 12 foot inside.

@brennanshiverick4248 Ай бұрын

Did you build this or does the 15k include labor? great video!

@MultiShopMatt Ай бұрын

The 15k included assembly from whoever the building seller was. There was the option to assemble ourselves, but it's worth it for them to do it. It was actually only 1500ish for putting it up, and that was one day, so MORE than worth the time, effort, and warranty

@mikimikemike1 11 күн бұрын

nice ill take 2 for that price installed

@MultiShopMatt 11 күн бұрын

Exactly! Lol

@swiftbear 22 күн бұрын

How bad is the condensation right now with no insulation?

@MultiShopMatt 21 күн бұрын

With current weather it isn't an issue, even with rain. Is it humid, yes, but so is outside, and it isn't a conditioned space at the moment.

@swiftbear 21 күн бұрын

@@MultiShopMatt Ok thanks, I have to get a metal garage over a normal wood one because I'm in a flood zone and have heard condensation can be an issue with metal garages, so good to hear.

@Lovelyforlife1 8 күн бұрын

Lol we all know 6 inches is more than enough! 😂

@MultiShopMatt 8 күн бұрын

I'm showing this to my lady to prove a point.

@wildwoodtop 4 күн бұрын

Pole barns 🤟

@MultiShopMatt 3 күн бұрын

Pole barn was something we looked at when we wanted to do stages as we went, but decided as an all in one, this was better for us.

@shitbox_sommelier 2 ай бұрын

Woah a new Multishop Matt video! 🤯🤝

@MultiShopMatt 2 ай бұрын

I know right. Someone was slacking

@tonycol7074 2 ай бұрын

You forgot to add the air you breathe 😂

@MultiShopMatt 2 ай бұрын

This isn't a BMW, the air can equipped

@integr8er66 Ай бұрын

I disagree, I got my 20x25 10ft walls and an 8ft lean too all assembled in one day for $6500 I also paid 1800 for the concrete slab, and 2000 for closed cell spray foam and a few hundred more for OSB walls and conduit and boxes etc. I have about $11,500 in the whole thing.

@MultiShopMatt Ай бұрын

When did you get it built? Was your ground already flat?

@johnnyreb8030 2 ай бұрын

I would put an RV inside it and move in. LOL

@MultiShopMatt Ай бұрын

The next one that I personally build with have an RV Height door for sure!

@johnnyreb8030 Ай бұрын

@@MultiShopMatt Big metal building with a full bath would be perfect.

@superj8575 21 күн бұрын

it seems like this is all you mistakes. Those metal building guys come in and put up a bulding. You do the rest. Also a black building absorbs heat.

@MultiShopMatt 21 күн бұрын

Mistakes? How? I said we had to take care of clearing, leveling, concrete, and permitting before the building came in. Didn't say the building company charged us. All of this had to be done before they would even schedule to assemble it.

@superj8575 6 күн бұрын

@@MultiShopMatt It is simple to throw out a comment like i did and I appreciate you responding to my comment. Being a DIYer i (TM 1:09) I'd of done the Tree and Stump removal. Saying a little more than you where expecting (15K at TM 1:45) is a large oversight on your end. Expecting the shop to not be hot when you picked Black is another mistake (TM 2:39). (TM 3:20) Are good Choices but windows are a bit small but that is just preference (you called this out at TM 4:04) & 10 foot high is a great choice and this is helpful. 5:12 roof was a great point and if i build i would do the same & over hang matters more than you'd think, the gutters will help but that lower area is where the problems start and larger overhang would help. sorry for late response i just noticed that i had a reply to my comment this morning.