Metal Detected Melt Down - Bush Bullion - Real Trash To Treasure - ASMR Metal Melting

Metal Detected Melt Down - Bush Bullion - Real Trash To Treasure - ASMR Metal Melting - BigStackD

Рет қаралды 457,848

2 жыл бұрын

Gday again all you beautiful people , How has your week been? Good I'm hoping . Now today i melt down a heap of dug up scrap that was found in the South West Of Western Australia not far from my house. Thanks to my good Mate Jason for donating it all. It took a few goes to get all the impurities out but i think the Big Bar turned out awesome.
*******
20% OFF RINGS & BRACLETS Simply use the code word DION on this link
gthic.com/?aff=27
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
5% Off a furnace ,Burner, Full set up or Forge and a heap of start up info and links email me on bigstackddddd@mail.com
*********
Now Guys if you Feel like supporting the channel it wont cost you a cent as you can Simply just donate some of your time. By just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways and more treats for the dogs👊🏻😄. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻.
*********
461KG Motor Melt Down 34 minute Video
• 461KG Massive Motor Me...
**********
BigStackD DUST MELT
• Metal Dust Melt Down -...
**********
Follow me on Instagram for more behind the scenes pics.
bigstackd_c...
**********
TONG AND LIFTER BUILD VIDEO
• WHATS THE TOTAL START ...
***************
AWESOME CUSTOM STEEL STAMPS FROM ALINA
www.etsy.com/shop/Stampsworks...
*******************
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online KZfaq name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
***
*******DISCLAIMER****DO NOT TRY THIS AT HOME****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
**********************************
My other 325+ videos
/ bigstackd
********
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
• Forging Crucible Tongs...
*****
Follow me on Facebook
/ bigstackd-casting-2935...
********
Forge supplied by my friends at Devil-Forge.
Dont forget to email me for a 5% discount link and a heap of info to get you Started😁
*********
FURNACE SETUP 4KG
• Copper melting in bran...
FURNACE SETUP 10KG
• Devil Forge 10 kg Ligh...
TEMPERING CRUCIBLES - Pauls Garage
• How to Temper a Graphi...
GAS USAGE AND SPEED COMPARISONS ON ALL 4 DEVIL-FORGE FURNACES
• 4 Melts 4 Pours 4 Poun...
WHAT YOU NEED TO START MELTING METAL including LIFTER AND TONG BUILD
• WHATS THE TOTAL START ...
LEARNING TO CAST VIDEOS - Swdweeb
• Learning to cast metal
AWESOME CUSTOM STEEL STAMPS
www.etsy.com/shop/Stampsworks...
CUSTOM COIN MOLDS NEW ZEALAND & AUSTRALIA ONLY
/ eccentrickiwicreative
COIN MOLDS LAS VEGAS - ArtByAdrock
artbyadrock.com
PETROBOND SAND AUSTRALIA ONLY
www.greensand.com.au/epages/g...
***********
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it.
*****
#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
#dumpsterdiving
#scrapyard
Metal Detected Melt Down - Bush Bullion - Real Trash To Treasure - ASMR Metal Melting - BigStackD

Пікірлер: 1 000

@bigstackD 2 жыл бұрын

Hey there all you sensational subs how are you all? I can’t believe how fast these weeks are going, But every week that passes theres a new BigStackD video to watch . Super simple today where I melt down a heap of buried metals that were dug up in the bush around near where I live. There was sooo much slag in this it was unbelievable but at the end of the day I got myself an awesome piece of buried treasure to add to the stack. Now do you guys like these longer videos or do you prefer the 11-12 minute videos? I will be putting a poll out this week about this asking your preferred length of video time as I would be super curious . Take care everyone and see you all next week And have a great weekend😁👋🏻

@leanna6226 2 жыл бұрын

Have a blessed weekend . Thank you so much for the Asmr. 😇💜💜😇

@Ziangal 2 жыл бұрын

Morning BSD, always love the content.

@user-cd4hz3yq5v 2 жыл бұрын

Masoud -iran

@richardmclean7973 2 жыл бұрын

Hi me again and i would prefer longer videos please. Perhaps they can run constantly and for ever..love all your videos I'll watch all again and adds. Big motors are great and what about big compressors. Love bush metal detector finds/melts. I like the recycling part as well. Every little helps and if we all had this attitude we might help our planet.

@MichaelUSA898 2 жыл бұрын

Yes sure

@zeldaman1112 2 жыл бұрын

The technical terms like round thingys, spikey thingys and such are really important to know. Thank you for educating bigstackD

@caseywood9781 2 жыл бұрын

Edify

@dopeymomasboy 2 жыл бұрын

Lol one of my favorite parts

@adamtheninjasmith2985 2 жыл бұрын

Well you have to classify your stuff... My favorite thingys are the random ones lol

@dopeymomasboy 2 жыл бұрын

@@adamtheninjasmith2985 my all time favorite thing on this channel is the "random" places he finds snacks to eat.

@wesleydavis1532 2 жыл бұрын

Definitely like the videos with the most content in them my friend..But then again you could make a three minutes video every week and I would still tune in.. Thanks for all the great vids."You Rock"☮️✌️👍🤙

@leifhietala8074 2 жыл бұрын

I suspect bigstackD is, in fact, a dragon. Just a more modest one, satisfied to hoard a pile of metals that aren't regarded as valuable - just useful.

@mgread51 2 жыл бұрын

Copper and such are really valuable though

@lucas23453 Жыл бұрын

One of the metallic dragons, hoarding that which mankind could use, waiting for the day when it is needed.

@hello7533 2 жыл бұрын

18:41 "if I sand these imperfections out, I would lose a lot of weight"... Me too BigStack, me too.

@joaocosta3374 2 жыл бұрын

Efing underrated... and based

@suntzumlbb147 2 жыл бұрын

@lilylavender4709 2 жыл бұрын

The wierd places this guy pulls burgers and other food items out from is hilarious

@doytr2226 2 жыл бұрын

indeed, but some of those burgers look awesome... living in the same state i'd love to try some next time i swing through on my way to Margs.

@frankmurphy5 2 жыл бұрын

I thought he was gonna eat chips this time, which would've been a reasonable thing to get from a box, but nope, burger!

@christianrodriguez3877 2 жыл бұрын

What do you mean weird?? You don’t have burgers in big boxes and crates??

@leifhietala8074 2 жыл бұрын

This last one was shipped to him.

@VtuberLife 2 жыл бұрын

im still searching around my house cant seem to find them they hide pretty well

@bearpawdgamr2785 2 жыл бұрын

I'm so glad you went with the technical terms. Bunch of rusted mixed thingys can sometimes be a hard concept to grasp for novices.

@dorvaci 2 жыл бұрын

I wonder if there were any thingy majiggys?

@Dasbob00 2 жыл бұрын

these are layman's terms. he couldn't use the terms whatchamacallit, doohickey, thingamabobit, whowhatsit, or the infamous thingamajig

@fluggaenkoecchicebolsen 2 жыл бұрын

I love being in the UK because every Friday I wake up to one of these BigstackD videos

@scottdoubleyou563 2 жыл бұрын

I kinda like being half a world away in Miami. This is what I watch to relax and sleep after 12 hours in the hospital on night shift.

@dyadica7151 2 жыл бұрын

One of the things I like about how you go about this is how much attention you give to minimizing waste and loss.

@_mnejing 2 жыл бұрын

As a professional thingologist with an advanced degree in thingonometry, I can confirm those are thingies. Except for that one thing, it was actually a thinger, and that's a whole other discipline.

@asgorathalpha8316 2 жыл бұрын

The scientific term for a thinger is a doodade. We need a doodadologist.

@HeavenScentsDetroit 2 жыл бұрын

I thought I saw a few doohickeys in there too… don’t forget those 😁

@traceyosterlind14 2 жыл бұрын

😂😂😂

@lewisgiles8855 2 жыл бұрын

Thinga majigs!

@christraven 2 жыл бұрын

Didn't one of those count as a Whatchamacallit? Or am I confusing that with a Thingamajig?

@Joe14876 2 жыл бұрын

The fact that he can transform dust into a goddamn lingot is just wonderfull Keep it up man👍

@frankthespank 2 жыл бұрын

Your garage is most guy’s dream! You got a nice open space on one side and a workbench area on the other and amenities like a big TV, a fridge and two doggies to play with. I envy you dude! 🤘🤓

@CatNolara 2 жыл бұрын

For making cleanup easier you could build a cyclone seperator to hook up to your vaccuum. It seperates out any solid stuff (even dust) and collects it in a bucket, leaving only the finest dust to go into the vacuum itself. I built one from cheap materials and an extra vacuum hose I got from the garbage for collecting chips and dust from my CNC router, works like a charm.

@Ironman829 2 жыл бұрын

You know what's wild, I was thinking about this as you were cleaning uo the bar. I watch you week after week, just do cool shit that I would like to do. I have no idea who you are, but I have watched for literally hours on end. I think thats pretty cool. I get a positive vibe from you. Been a sub since the early days. Gonna ride this out and watch the dogs get old with you.

@brettjc0483 2 жыл бұрын

If you can put in the initial money/time for casting I’d totally recommend it to you. It’s a great hobby.

@lewisgiles8855 2 жыл бұрын

What a rather emotional text😢... I like it!

@reggiep75 2 жыл бұрын

I enjoyed watching loads of these vids during the dreaded lockdowns here on Plague Island (aka UK) and it was enjoyable and I felt the same way. It's nice when you find the small pockets of the internet where it's nice and enjoyable compared to the areas where people are trash for no reason!

@Smootus 2 жыл бұрын

Yeah, me too, an unknown man to me melting copper, aluminum and brass, and I enjoy watching him do it and loving up on his pups, my kind of people…..

@jerrykinnin7941 2 жыл бұрын

Yep just goo quality stuff.

@cmc08161972 2 жыл бұрын

First of all, your random searching for snacks is hilarious. Second, every time I see that thermometer, I think "oh, that's the beer thermometer". And finally, you have the best fucken socks mate! Cheers!

@MakoRuu 2 жыл бұрын

The fact that he saved the metal shavings made me so fucking happy.

@mysticwolf2842 2 жыл бұрын

I like the way you hide your snacks and lunch, it keeps the viewers wondering. These melts can be very fun to watch! Thanks for putting them out.

@troelschristensen8562 2 жыл бұрын

I find these melts with random scrap metal particularly interesting, because while the resulting bars may not be pure or valuable alloys, it is always exciting to see if the various metals will alloy at all or if they just become these layered slabs of metal.

@IceBlueDragon58 2 жыл бұрын

The stack is getting up there now, there’s not much room left on the shelves. I hope you weigh all the different pieces of metal you have and list a tally of each type when you get to the 1 tonne goal. Would be really cool to see which metal is melted most and taking inventory of all the pieces would be good for you to keep track of it all.

@cmcmanus1974 2 жыл бұрын

This is something i would love to see.

@QuietlyWatchingTheWorldBurn 2 жыл бұрын

I would like to add the monetary value of each metal type. Just the grand totals.

@frankmurphy5 2 жыл бұрын

I also love restoration videos, so cleaning up the dog sign was a nice bonus today 🐶😁

@jonnygunn6259 2 жыл бұрын

That was a tough melt, having to do it multiple times. Great job of pulling something crappy out of the ground and turning it into something awesome!

@SouthFlaDiver 2 жыл бұрын

Once it's hot, doesn't take long to remelt

@mooglew1705 2 жыл бұрын

@@SouthFlaDiver wonder if it would help to wash/ brush them off first 🤔

@ColinS-jf2hj 2 жыл бұрын

I really appreciate a channel of over a million subs not breaking the video to advertise the Raymond earbuds or raid shadow legends.

@nathanthecanadian9444 2 жыл бұрын

God I love green fire, there's just something about it that captivates me

@pandemicgrower4212 2 жыл бұрын

Green fire you say?

@andrewmorfett4192 2 жыл бұрын

That shade of green... Oh, wow, I know exactly what you mean. It's mesmerising to see. I love it when our man is melting copper...

@themurph930 2 жыл бұрын

Disney villain vibes

@TheHatchetJack 2 жыл бұрын

I didn’t really think this was legit and serious channel till I saw him melt pointy things that’s some top level skills

@terryeason4319 2 жыл бұрын

You never say a word BUT You have about the best and most informative channel on KZfaq. Drill the doorknobs! Great tip. Read the lines to learn I really like watching. East Texas

@kagapeme 2 жыл бұрын

Rough? It's beautiful! I always love your brass pour vids, brass is amazing!

@OliPrimOxx97 2 жыл бұрын

Are your neighbors ever curious about what you're doing when the devil forge is in the driveway ?

@coltlewis5871 2 жыл бұрын

Turkey Fryer. Mans gotta eat!

@brettjc0483 2 жыл бұрын

@@coltlewis5871 reminds me of the time he put a cooktop over his foundry and made steaks.

@coltlewis5871 2 жыл бұрын

@@brettjc0483 Lol! Yup

@angrypotyeto9656 2 жыл бұрын

Very cool flames this episode, I always love the look of an old copper/brass melt

@Slimboy025 2 жыл бұрын

Yeah they give the best colors

@stevenbuck4090 2 жыл бұрын

Your videos make me feel comfort and familiarness. I love settling down in bed and watching. Thank you for your content.

@Midnight24435 2 жыл бұрын

8:16 - I'm about 95% certain this is the most I've ever seen of bigstackD's face - or in this case, his eyes + respirator. I do not recall seeing any part of his face *directly* viewed by the camera in any of his many other awesome videos. Sure, might catch a glimpse of his reflection after sanding/polishing the ingots, but he's consistently wearing a mask or respirator, not like here where it's been directly filmed.

@1_GigaWaffle 2 жыл бұрын

He's usually very careful. I wonder if he missed it while editing.

@bigstackD 2 жыл бұрын

I can assure you I knew it was there But there’s nothing you can see except some eyes and a forehead👍🏻.

@user-qu9uq4zp3s 2 жыл бұрын

@@bigstackD Дружище, соберёшь 1 тонну, продай и купи золото на эти деньги. И сделай СЛИТОК ЗОЛОТА. Посмотрим какого он получится размера и веса!!!

@daltonnitsch 2 жыл бұрын

Ahhhh nothing beats not being able to sleep and seeing big stack post this at 3am US time.

@isaacwahlquist2534 2 жыл бұрын

for real tho

@pandemicgrower4212 2 жыл бұрын

I wake and bake and watch this on Friday morning when I can't sleep. Half the time I go back to sleep so got to watch again 🤣

@TH-kd1ju 2 жыл бұрын

Absolutely! I've got a bad neck & headache keeping me up (almost 4:30am) love seeing a new BigstackedD to watch! 🤩

@ProblmSolvd 2 жыл бұрын

I love the waste not want not level of salvage you do, right down to dust and shavings, great stuff.

@josephbaum8766 2 жыл бұрын

The best part of working 13 hours is coming home and relaxing to some big stacked melting

@Pocket-Watch 2 жыл бұрын

Good to see lots of dug up trash get used for something great, like adding to your melt collection. Thanks for this video, cheers

@newlifewithin1 2 жыл бұрын

Looks like those found metals were a lot of work. That third pour looked so much cleaner than the first. Hopefully getting the metal for free helps offset the cost of gas to melt it 3 times. Very enjoyable video, as always!

@caseydarrah 2 жыл бұрын

"Mixed thingys" And right there I lost it laughing. Thanks for the day brightening!

@Jet1ranger 2 жыл бұрын

Ah yes... My favorite "stove pipe" popping! And the clown mask reflection hidden gem when you're looking at the finished product! Priceless!

@kie950 2 жыл бұрын

When you retire a crucible do you reckon you could let the metal freeze inside it then chip the crucible off so you're left with a sand castle but with metal?

@earnestlight6666 2 жыл бұрын

Always look forward to seeing the new videos. Will be attempting my first sand cast soon just waiting for the mold blank. Then it's off to the races. Always educational thanks.

@merlin6625 2 жыл бұрын

Yes, drill holes in pieces that can hold air like a door handle, or pressure can blow up! Good stuff BigStackD 👍

@Polsnulspace 2 жыл бұрын

Saturday morning chill with bigstackD and a cuppa tea. Peace from Scotland!

@Babyjohn8170 2 жыл бұрын

It is a joy watching your channel grow. You are going to reach 1.10 subscribers really soon. I rewatch all your videos, because the editing skills, the hard work, and dedication are a pleasure to watch. Plus, Ingot and Bullion, as well as the colorful socks.😃👍

@richardgreaney 2 жыл бұрын

I would love to see a sand casting of that creepy face thing that you always show after final polishing.

@StephenGibson 2 жыл бұрын

It's Jack Nicholson from The Shining.

@Byronidas 2 жыл бұрын

Love the videos and the Paw prints set the finished work off well.

@mikemathews9277 2 жыл бұрын

I’m impressed that was a lot of slag but the results is outstanding!!!

@craigb9241 2 жыл бұрын

I feel pretty proud at guessing as the video was rolling. I thought, "this looks like a #8 crucible job", then "a burger would hit the spot," "That's gonna be a remelt." Guess I've been watching long enough to have picked up a few things. Cheers!

@Chlorate299 2 жыл бұрын

I'd wager that a lot of the slag you're getting with these brass melts is zinc oxide, a lot of flux added to the cruciple before the melt might help create a barrier that floats on top of the metal.

@cruisinkruty4405 2 жыл бұрын

Exactly,adding the flux/Borax with the initial loading of the crucible shields the melt with a layer of flux to stop oxygen from getting at the alloy!

@albertoortega9453 Жыл бұрын

Excellent and very creative work. I enjoy every video, thanks

@gotmilk4382 2 жыл бұрын

I just love the silent humor in your videos! My favorite part! 😂🤣 Cheers from Alabama! 🍻🐕🇺🇸🇭🇲

@mkhuntstreasure3192 2 жыл бұрын

I think it’s more interesting when the ingot has a few flaws.

@TH-kd1ju 2 жыл бұрын

15:59 i love the way the frenchies lay flat on their tummies with their legs all stretched out, they're such cute little sweeties 🥰 Definitely trash to treasure!👍So many thingies to melt, so little time 😂 It's funny to me that you complain about your shop being "messy" I've never seen a guy keep their work space so nice and neat! Sweeping up every bit of dust etc wish my guy was half as tidy lol

@patrickschoenpflug 2 жыл бұрын

It’s good to see waste metal from the ground getting used to fill your stack a clean planet is a happy planet, awesome video BigStackD thanks for sharing 👍🏻👍🏻👍🏻👍🏻😄😄😄😄😁😁😁

@koalaboygaming346 2 жыл бұрын

Oh god you would not believe how many chores I have done today. But seeing you upload has lifted my mood

@willd6570 2 жыл бұрын

Me, everytime your stir the crucible: Good soup

@matthewh4747 2 жыл бұрын

Aw you should have kept that large ass buckle, it could have been a decent coolector piece, or shit a funktional buckle. I just wanted to say as someone from on the opposite side of the world, the melting and shiny shiny metal is just a distraction from the dogs. Ingot and bullion forever

@buddybonbutt7510 2 жыл бұрын

I like you're pfp... May I interest you in mine?

@talscorner3696 2 жыл бұрын

That light blue flame with purple streaks is really cool!

@jeffdorrity5609 2 жыл бұрын

Love this brass ‘thingy’ melt! Always enjoy seeing “The Boys”! I enjoy both time frames, short & long.

@MrXtacle 2 жыл бұрын

Cant believe you haven't gotten yourself a milling machine yet. Just get a used bridgeport or something, and a facemill, and you can stop sanding, grinding, and collecting dust! Instead just plop it down in a vice, mill it on all sides, collect the chips for easy remelt. Don't need coolant or anything for brass, copper and aluminium, since it machines pretty easily.

@randylewis382 2 жыл бұрын

I've been watching your videos for 2 two years now. And I can honestly say your videos have become my peaceful moments every Friday now. But I have wanted to know scene's I have started watching your videos what are you actually going to do when you reach that target weight?

@rockwilder0 2 жыл бұрын

7:44 That blue flame though. Amazing.

@almadeckard8360 2 жыл бұрын

Now that was a perfect ice melt and double crush. Wonderful!

@peasantlevelcrafting 2 жыл бұрын

Cheers BigstackD I’ve just made my first propane furnace. Imma send YOU a coin!

@nathanlewis5682 2 жыл бұрын

I don't know if shipping in and out of Australia is legal anymore. Their government has a boner for tyrannical authoritarianism.

@dizzolve 2 жыл бұрын

13:08 did those dirty metals ....... extended heating and cooling cycle .......... or the borax put a hurting on your crucibles? Or is that damage just normal consumable expectations

@vikingo3550 2 жыл бұрын

I go with normal lifecycle of a crucible. The constant heating and cooling cycles, as you said, end for cracking it. Of course how you treat them matters, but he really cares about his crucibles.

@MAGGOT_VOMIT 2 жыл бұрын

@ 4:55 Yeah yeah it's a box with a burger innit. We're automatically drawn to those beach towels that look like they are in desperate need of a wash. {0.o} 😆😂🤣

@jamienelson7544 2 жыл бұрын

Just found you on a covid isolation yonk, your humour is very similar to Scottish humour. Keep it up its quality entertainment. Love the boys not very noisy, my neighbour had one and it was very noisy

@decoy4507 2 жыл бұрын

Would it be possible to melt let’s say Copper And Brass in two separate furnaces and pour it into the same mold at the same time and see what comes out of it ?

@somejoe7777 2 жыл бұрын

You can, but most brass is 55-65% copper already (the rest is zinc). Adding additional copper just gives you another version of brass that will be more of a yellow color, and more ductile.

@nowweride3094 2 жыл бұрын

Great advice about the drill! Who knew! Any video you make of melting the heck of anything is good at any length! Please pet the little boys for us! 🤷‍♂️🇺🇸🇦🇺👍

@jackking5567 2 жыл бұрын

That's something you need to be extra careful with. Many years ago we were making fishing weights. Lead was being used for them and it came from multiple sources including buried finds. As you should, we dried everything and roasted them in heat. When dropped into a ladle, one scrap of lead contained water still and it instantly vapourised. I still carry a scar on my shoulder to this day. (was over 40 years ago!) The buried lead had allowed water to enter a chamber over the decades. A simple day long roast beside the heat wasn't enough to remove all of the water. Interestingly, the molten lead explosion actually coated the ceiling of the large building we were inside - it was stunning!

@wethepeople4762 2 жыл бұрын

Back to watch another episode of the 2 cutest pups and their smelting snack bringer.

@psychomusic8974 2 жыл бұрын

I love being in the The Netherlands because every Friday I wake up to one of these BigstackD videos

@BCM1959 2 жыл бұрын

It's 3:am here in California this video just posted and already over 10,000 views! I guess I'm not the only one that enjoys your hobby. Thanks.

@leanna6226 2 жыл бұрын

Thank you 😇💜💜😇

@habbyhouse 2 жыл бұрын

I love it when you remove slag. It's satisfying somehow.

@robertnahal4605 2 жыл бұрын

Intentionally revealed a tiniest clue to your identity? Appreciated. Thank you as always for the show.

@KarBof0S 2 жыл бұрын

Металокоп и плавление - 2 любимых дела в 1. Крутое видео! Nice video!

@metallicasnake 2 жыл бұрын

Another fantastic effort. The "flaws" in the bar make it all the better. It's a staple of your unique ability. Thanks for all you do.

@annieokie3789 2 жыл бұрын

Love watching your videos!!!😄👍👍🏆🇺🇸😘 Also Love seeing your cute little puppy doggies!!!🐶🥰

@roberthennis1397 2 жыл бұрын

Lol you know you've been watching bigstackD for a minute when you never melted anything but candle wax but you can tell by watching the metal pour from the crusible that it's going to need borax and one more remelt 😆

@myfatassdick 2 жыл бұрын

I appreciate that you showed everything going in

@markh2005 2 жыл бұрын

Cool melt, particularly when it burnt bright blue!

@lisabierstedt5045 2 жыл бұрын

Love your videos and break charm dogs are wonderful and finding your meals like a treasure hunt keep up the awesome Fun!

@jasontate8575 2 жыл бұрын

Damn that burger 🍔looked good!!!

@billtheboatman 2 жыл бұрын

I feel compelled to watch these all the way to the end just to see if the shelf unit can continue to hold all the weight.

@daleyfamily2179 2 жыл бұрын

Love all the videos regardless of length. You got me hooked. Have my own 4kilo forge and melt every weekend. Thanks for all the great videos.

@daniyalanwer2927 2 жыл бұрын

Broo, one tip: add food colour in your ice block before freezing it, it will look amazing! 😍

@Loneranger670 2 жыл бұрын

I like the roughness of the end product, it’s authentic.

@neondreams4077 2 жыл бұрын

such a beautiful piece from forgotten metal. i love how the dragon's horde is made from metal that is mostly saved from rusting away uselessly. proper recycling!

@jamesway5036 2 жыл бұрын

Always love trash to treasure. That is a beautiful brass bar. The imperfections build character to it. Awesome job brother. Have a great weekend. Cheers 🍻

@danieldodson1998 2 жыл бұрын

Gotta love those found signs!! And so apropos 😁

@jarodmyers1205 2 жыл бұрын

Can we just appreciate how sturdy that shelf is, it's litteraly holding hundreds of kilos, and is just completely fine.

@ramcharan4853 2 жыл бұрын

Nice casting 😍🤩

@Alpemomi 2 жыл бұрын

Worthy addition to the Stack! I find it perfect with its imperfections by the way, and I love the tag on it "100% DIRT DUG". Kudos Mr. BigstackD!

@normajeancaballero7959 2 жыл бұрын

04:35-04:55 Dude...you are a character. 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 18:40 The imperfections give the brass bar character. 👍😎👍😎👍😎👍 19:45 I remember the first tag to hang.

@lescrooge 2 жыл бұрын

Longer videos for sure. great content. look forward to it every Friday as I drink my beer. cheers from South Africa

@xnooknooknook 2 жыл бұрын

That green flame from the copper(?) burning is so other worldly.

@thomaspaquette9991 2 жыл бұрын

Very apt descriptions of the melty objects.

@ambersamusements5257 2 жыл бұрын

Loved the finished product. Tons of character.

@michaelschuenemann3505 2 жыл бұрын

What a nice melt and what a nice Bullion Bar - well done again ! Have a cold one Son ! Cheers from us in QLD !!!!

@kilroywashere809 2 жыл бұрын

The imperfections are what makes the bar perfect! Cheers!

@josephcormier5974 2 жыл бұрын

Now that is a pretty peace very nice. Two thumbs

@clintdoolittle1576 2 жыл бұрын

BIGGY AMAZING JOB ON THAT SCRAP METAL. BIGGY what caused that BLUE FLAME at 7:44 in the video it looks really blue. INGOT looked so cute with both paws and head down. I think with all those In perfections gives it Character just my opinion lmfao FANTASTIC JOB MATE AS ALWAYS 👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦