Metal Magic: Fixing Mistakes and Making Adjustments
Рет қаралды 9,774
Күн бұрынNo airplane project is perfect. You are human and you're going to make mistakes. KITPLANES editor at large Paul Dye discusses some of the more common mistakes builders make and the ways to fix them. Join us for the 23rd episode of Metal Magic right now.
This series is sponsored by Aircraft Spruce & Specialty - www.aircraftspruce.com Visit the KITPLANES website for more tips: www.kitplanes.com/metal-magic...
#homebuiltaircraft #kitplanes #experimentalaircraft #eaa #tools #metalworking
@bobpenzien7962 2 жыл бұрын
Nice video Paul!
@GaryASobek 2 жыл бұрын
Nice formation photo.
@wareairaviationservicesllc4933 Жыл бұрын
please keep doing these, they are great! I would suggest a video on making hand make long sheet cuts and how to best file those cuts to a uniform line. (I don't have a shear)
@nghicks42 2 жыл бұрын
For the minimum edge distance, is that the distance required after the hole is drilled, or the minimum spacing from the edge to the center of the hole?
@garrygordon4680 2 жыл бұрын
😳 Promo-SM!!!
@ClaudeDufourmont Ай бұрын
Trop de baratin
АРХИВ ИСТОРИЙ
Рет қаралды 816 М.
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 2 МЛН
Мастерская Синдиката
Рет қаралды 3,8 МЛН