Microtech Standard Issue (MSI) Folding Knife

Microtech Standard Issue (MSI) Folding Knife - Overview and Review

Рет қаралды 47,249

Күн бұрын

Full review of the Microtech Standard Issue (MSI).
Microtech Standard Issue - shrsl.com/3y6bx
Microtech Standard Issue alternate link - dlt.link/3mfeiRe
ALL Microtech knives - www.dlttrading.com/microtech-...
EKnives New Arrivals - eknives.com/new/?aff=2
DLT Trading New Arrivals - www.dlttrading.com/newest-arr...
Urban EDC Supply New Arrivals - bit.ly/3iyxhST
Kunwu Knives - kunwuknives.com/?aff=2
Blade HQ New Arrivals - shrsl.com/36fac
Check out Tools For Gents! - toolsforgents.com/?tfg=6336
Tactile Knife Co. - tactileknife-co.myshopify.com...
Crane's Cutlery New Arrivals - cranescutlery.com/shop/?ref=1072
GP Knives New Arrivals - shrsl.com/3bzf4
River's Edge Cutlery New Arrivals - riversedgecutlery.com/shop-al...
Shop Flytanium! Custom parts for your favorite knives! - shrsl.com/333ql
Check out these other GREAT retailers! - linktr.ee/MCalt
--------‐----------------------------------------------------------
My MOST RECOMMENDED KNIVES all in one place! - linktr.ee/MetalComplex
--------‐----------------------------------------------------------
Metal Complex stickers! - www.redbubble.com/people/meta...
--------‐----------------------------------------------------------
Knife Pivot Lube - knifepivotlube.com/products/k...
The tools, flashlights, sharpening equipment, and knife storage I use right here on my channel! - www.amazon.com/shop/metalcomplex
As an Amazon Associate I earn from qualifying purchases.
--------‐----------------------------------------------------------
SUBSCRIBE TO KNP! - / @knifenutspodcast
My Patreon - / metalcomplex
Follow me on Instagram @metal_complex
Become a Member of my channel! - / @metal_complex
--------‐----------------------------------------------------------
#METALCOMPLEX #knifeunboxing #knifereview #knives #knife #pocketknife
**DISCLAIMER** This channel's content is meant for educational purposes only, and encourages the proper/safe use, handling, and understanding of tools.

Пікірлер: 231

@metal_complex Жыл бұрын

My Amazon page! The gear I use here on the channel! - www.amazon.com/shop/metalcomplex Thanks so much for watching! You can support my channel on Patreon here - www.patreon.com/metalcomplex MC stickers! - www.redbubble.com/people/metal-complex/shop?asc=u

@codybroadway8496 Жыл бұрын

Hey blade he has a few terzoula autos in magnacut it’s the jungle fat carbon not the brass but I thought I’d let you know

@Bredahl84 Жыл бұрын

Do your brother maybe carry his phone in his right-side pocket? Maybe he doesnt want to scratch it up? Not that I can relate to your brother or anything..... :P I love, love, love that blade! One of the nicest looking blades Ive seen.

@samrosado5703 10 ай бұрын

I ended up getting the polymer handle variant, it took a bit of time to find availability. I will say of everything great about this knife, it was actually the polymer handle. This is by far the most incredible execution of polymer I’ve ever experienced. It’s contoured and textured, warm to the touch almost like micarta, but most impressively THERE IS NO FLEX! Absolutely shocked me and now I’m holding all other USA knives using polymer to a much higher standard.

@TheSMPStudios 9 ай бұрын

Thank you for this comment! I was worried about the the handles. Can’t wait to get it in hand!

@theknifeconnection9571 7 ай бұрын

Phenomenal knife

@markedfortime Жыл бұрын

I was lucky enough to pick one up. The action was horrible when I first got it. I ended up taking it apart to figure out why. Turns out the coating they apply to the blade was also coating the blade where the lock interfaces. I hand polished the blade along the lock interface with a diamond stone, added some KPL in the pivot bearings and it runs smooth as glass. I don't know if I would call the "lock stick" real stick. The disengagment does require the slightest of force, but it's been extremely consistent and is much improved with the polishing. The blade swings freely with the lock disengaged. Skiff does not make a caged bearing that will fit this massive pivot, but the shipped bearings do a great job and you can literally hear the bearings rolling as the blade is actuated. The blade material does seem to be better than the standard M390..still super sharp as the day I got it and I've been using the heck out of it..tactical cardboard cutting! I also got an EXO-M and as much as I want to carry it, the MSI has been my goto ever since I got it. EXO-M is my desk fidget tool.😅

@Sleepy_spartan717 Жыл бұрын

Love the info you give here. I wonder is taco bearings makes something that would fit this. I have them on a zt 0562cf and they are absolutely amazing

@Magoot2456 Жыл бұрын

Yea mine had kind of crappy action from factory, so as all us knife nuts do, I tore it apart and cleaned it and re lubed it with nano and now it's amazing! I think the lube they use is garbage, so a little nano fixes all! :)

@ak4dreday Жыл бұрын

I think that the pricing here is obviously strategic. The $250 price point is where people who are generally not fans of something, and is the top end of "I should try this maybe" " it's a great deal, everyone says so I think I'll miss out if I don't buy this". And I do 1000% think that the price tag is going up or the other option is that they will have much , much cooler variations for a lot more money.

@Sleepy_spartan717 Жыл бұрын

I think it’s priced that way to compete with the protech Malibu. It’s literally an almost direct competitor from two typically auto companies. Just with two different, equally fidgety locking mechanisms.

@paulbosley6448 Жыл бұрын

SOP

@BennyBladez- Жыл бұрын

I totally agree

@landontreinen3062 Жыл бұрын

I think more expensive variants is probably the most likely scenario. Being Microtech, I’d expect to see some 4-500 dollar knives with some signature elements and special finishes around this time next year. Probably a handful of mirror polished 2,000 dollar Marfione “custom” variants as well.

@Skwid-Lives Жыл бұрын

It’s way overpriced. I have 100$ knives that are just as good

@OGBladeReviews 11 ай бұрын

I picked my copy up recently and it is the "new and improved" version with the frag milled texturing on the handle, and reviewed it. Pursuant to the clip, I have read somewhere in the past, before this knife came out, that Microtech uses that clip as a two-stage where it can go partially into the pocket, or all the way into the pocket. This gives the user the option of having more to grab to "tactically" remove the knife or choose a deep carry option. Snarky, nice review! 😅🗡️👍

@mynamesjeff347 10 ай бұрын

I have a Stitch with the ram-lok best knife never I've ever held and last night I found the exact MSI I wanted. Frag G10 with an apocalyptic plain edge. Very excited for that to come in

@Bumblesnitch 7 ай бұрын

Picked up the all black version. Thing is way bigger than I expected but I love it.

@jamesstraub4981 Жыл бұрын

This is the first folder on my radar in quite a while. Really want one.

@supporterofsanity 11 ай бұрын

Got mine through the service personnel program. 190 delivered. Mine has an aggressive texture in the scales and I do not detect any lock stick. Way bigger than I thought it would be. Home run for me.

@walnutz84 9 ай бұрын

Just picked one up and got to say I really like it. No lock stick on the one I got so that's a plus!

@slinginlead1 Жыл бұрын

"Whoo Hoo, crazy ski jump bill!" You crack me up :) keep up the good work

@gotsouced4943 Жыл бұрын

Yeah I hate that there's not enough tension and you drop your knife and the blade just popped open.

@user-hh6qb1ol9x 7 ай бұрын

I just got my first MSI and this is the only knife I have a problem Spidey flicking. Came here to see if that was an issue. So glad it’s not just me. Overall seems like a great knife for the price.

@tonymendoza7484 10 ай бұрын

Love mine the scales were kinda sharp I used a rough piece of cloth and rubbed the edges nice and smooth much better!

@GLOCKsh00ter24 Жыл бұрын

definitely gonna be picking one of these up, but I think I'm gonna wait until they come out with a CF variant, maybe they'll increase the "detent" a little by then.

@shadowcastyt Жыл бұрын

I believe they have a CF variant coming soon

@mikereese15 Жыл бұрын

Will be interesting to see how pricing and variations play out.

@srm158 Ай бұрын

I just picked up the polymer version on a trip up to Vermont this last weekend. It was 160 after taxes... Im very impressed with it. Absolutely worth the money.

@rjoshm20 Жыл бұрын

I guess I am one of those rare weirdo’s that uses a folder in a tactical environment. Having ambi clip and lock mechanism is a must for me. My holster sits directly over the pocket that I would normally carry a knife so I either carry it in my opposite side or below the holster in a cargo pocket. The blade shape also makes alot of sense to be able to cut folks out of webbing/seatbelts with little risk of cutting them. Great review, this one is definitely on my “get” list.

@petervu9773 7 ай бұрын

just picked one up from local AD and over paid but I dont mind, this will be my main EDC for a while the action reminds me of the Benchmade Anthem but without the Ti acoustics. CF scales OTW.. pretty excited for that. You are the OG of knife reviews ! thanks for the video.

@mannycano4599 Жыл бұрын

My mini Freek Benchmade kind of got gunked up. It was not drop shutty or openy anymore. So I watched the Nick shabazz video with the trick on how to open up the Benchmade style lock without opening up everything else I was able to clean it all out and works nice now but yeah pocket lint will happen 😊

@stephenyeung6341 7 ай бұрын

This is a an awesome knife! It became my new EDC, replacing a ZT 562CF. It comes incredibly sharp out of the box and the fit and finish are perfect. I love that style of blade as it has a very usable edge and a very strong tip. It opens smoothly and easily with just a flick of the wrist. I added a little bit of lube to the lock and the rounded part of the blade to make opening even smoother. M390 is an awesome steel and M390MK is very similar. The best part is the incredible value of this knife (polymer version) at only $177. This knife is way better than Benchmade’s Axis lock which i carried for a while (710) McHenry and Williams.

@theknifeconnection9571 7 ай бұрын

The 0562 is a phenomenal knife. Idk why i gave mine up. But also have one og these here just cant have it untill christmas. Just recently got a special efition factor b2 with a timascus clip so itl have to hold me off along with the other 100 knives i own. But still cant wait

@Lochlann13 Жыл бұрын

I think this is a really solid starting point for Microtech to build on their crossbar-style platform. It definitely has some kinks that need to be worked out, but luckily none of them are deal breakers, at least for me.

@Ironside036 Жыл бұрын

Little tip if your finger is just barely resting on the lock button when you deploy the blade it neutralizes the lock stick. Also as long as you don’t deploy the blade like you’re cracking a whip, it will not stick.

@FT4Freedom 4 ай бұрын

Lol.

@Azzy5146 7 ай бұрын

I’ve been a fan of Microtech, and Metal complex reviews for years.

@knottheory79220 Жыл бұрын

I'm a righty who used to carry lefty. The reason why I did it at the time was I would often have something held or pinched or whatever in my right hand, and then I'd find I needed to cut a strap loose or something, but only my left hand would be free.

@ajcarter5053 Жыл бұрын

Can't wait till these are stocked to get one, good to hear it's metal complex approved !

@brokeboytactical4397 Жыл бұрын

I just used my ultratech for the first time! I've had it for 3 weeks 😂. Got a kydex sheath for my Leatherman oht from Amazon and used il my Microtech to open the package

@HobbyHobbit-ue6oi Жыл бұрын

On axis style locks I like to pull back on the crossbar and flick my wrist a bit to open it

@jonathanporter5223 8 ай бұрын

Just a guess but $250 must be for the G-10 handle version because I just purchased one with the polymer handle for $175. And honestly, I'm glad I went with the polymer. Which at first was due to its availability and the lowest price point I could find, but now its because the handle is just so impressive. I'm a lefty so I appreciate when a company does a fully ambidextrous model knife which with the MSI has been done exceptionally well. The contours are nice and even with great texturing. Lock up is solid, giving it a strong and robust feeling in hand. I mean, this thing is legit. Overall, I'm just stoked I found one, but now knowing it was worth every penny, well that's pretty cool, too.

@freeheelin1 5 ай бұрын

I love mine, just ordered some carbon fiber scales from votix

@carmelotansengco4605 28 күн бұрын

I have the FRN version. Basic black. First of all, I jumped at the first picture and told my seller I wanted one. I didn't bother checking the rest of the page. Secondly, even if I had checked the entire page and had seen the other versions, I think I still would have settled for the version I got. The reason? Price. PM2 price. Mine developed a lot of lock stick initially. Now it's stick free. I love it.

@FloridaBoyEDC Жыл бұрын

I’ve been seeing everyone’s videos on theirs and they look a tad different than mine. Mines has 2 extra screws by the stop pin. Was that part of the changes they made along with the clip?

@shamusmcinky4882 10 ай бұрын

I put a stiffer spring in mine and the spydie flick is among the best I’ve felt on a knife.

@geoffreydlin8043 9 ай бұрын

Where did you get it? Direct fit?

@thaknobodi 9 ай бұрын

Manix spring?

@matthuck378 Жыл бұрын

This is just about the most reasonable Microtech I've ever seen. A "mini" with a 2.75-3" cutting edge would be cool, but I won't hold my breath, haha.

@mannycano4599 Жыл бұрын

The T 20 pivot fastener as well as that lock barrel man!!! Beefy or tactical 😉

@Agony_Echo 9 ай бұрын

PIVOT TO PIVOT COMPARISONS MAN great vid probably gonna pick one up soon

@Tedlindsay7Pointerdog Жыл бұрын

Loving my green frag MSI

@JCpNK Жыл бұрын

I’m going to be patient and get one of these at some point in the next couple of years.. Of course they could take a break from making Microtechs and make more of these but we all know that won’t happen 😉

@carlito5552 Жыл бұрын

Wonder if a stiffer coil spring would solve that small "detent" issue.

@jamesfair9751 Жыл бұрын

Microtech has came out with a special edition ultratech with magnacut it would be awesome if they started using it in all their knives.

@junomckinnon4228 Жыл бұрын

Sharp knife by MT. They have super cool gear year round. I don't see the slowing down for a long time. I hope they are planning to make a lot of this model. Price isn't that bad either.4 inch blade as well! Sweet.

@mphil3051 Жыл бұрын

Great to see microtech getting into more manual stuff and its made in America

@user-iw2mo7yu4d 11 ай бұрын

If they make a compact version (3") I'm FOR SURE buying one, that would be the best EDC imo.

@Drumm3rboy0227 Жыл бұрын

I sympathize with your brother. I am mostly right hand dominant but carry my knife in my left pocket. My mother is 100% right handed and my father is 100% left. So I inherited a bit of both. I do almost everything right handed but shooting. I shoot left so for me a small flashlight in my right pocket and the knife in my left feels right.

@paulbosley6448 Жыл бұрын

I usually agree with you, especially concerning pocket clips. The only time I like that particular clip is on the Dirac, because it is so light I carry it clipped to my shirt and it really works great on thinner fabric. This knife is good for 250 but only because it's US made and a microtech. I should like it more but I just don't feel it. Passing it along.

@juddhalenza8297 Жыл бұрын

I’ll take it off your hands if you’re interested in selling

@paulbosley6448 Жыл бұрын

@@juddhalenza8297 sorry it's already gone. The hype is in full throttle mode. I didn't even have to list it, I know three people still waiting, people are paying double and don't bat an eye. I sold mine to a buddy for what I paid ... Just like he did for me on the factor:)

@cz1always608 Жыл бұрын

Did you mention the blade material? I must’ve missed that. Yes the stitch is more satisfying to open as you know.. if I was gonna say anything negative it would probably be the thing that you said the most the clip , to me, the clip seems very flimsy , definitely need a tighter clip on there . Other than that I think it’s perfect for a knife.😂 feels good in my hand, and I guess that’s all that matters. Thanks

@victorpetersen559 Жыл бұрын

Just bought some stickers just because of the comment on the tactical folks. Lmao. You had me laughing even though I am waiting to be running and gunning right now. Lmao.

@JackG79 Жыл бұрын

Such a good-looking knife. I hope that they get the quirks worked out. And can produce them on a larger scale. NOW that's a useful knife!!¡

@experienceprecision5406 Жыл бұрын

The msi is U.S. made

@JackG79 Жыл бұрын

@experienceprecision5406 thanks for the info sir!

@Luc1dRock Жыл бұрын

I want to get the stitch with this lock.

@lerch400block 9 ай бұрын

10/20/23 Blade hq have them in stock for 177.00 10/21 and they're gone 😅 I like the clip, it's carried over from their otf's

@Kris_Stiletto 11 ай бұрын

I want to get one e to try out. How would you compare it to my personal favorite, the AD20S? -) Peace, Stiletto :-)

@rman. Жыл бұрын

I hope flytanium does some scales for it.

@_Nathan- Жыл бұрын

Do you say ATM machine or PIN number? Those drive me nuts too 😂 Hoping I can grab an MSI in the next year or so. Gonna have to be patient on this one.

@ct2368 4 ай бұрын

My knives come out of my pockets a lot because of work and Microtech makes one of the best clips out there. It makes it so much easier to locate when putting it away blind and makes it easy to get out of the pocket because you have something to grab instead of pants. Anyways, love the channel.

@jpf5920 Жыл бұрын

I like it. But I think I'll wait till gen 2 or a smaller version. I'll believe the price when I see it on dealer's sites.

@kpace9910 Жыл бұрын

Locked and loaded for this Nutnfancy Feature Length knife review. Oh wait…wrong channel

@tylerhadfield166 Жыл бұрын

I freaking love the look of this knife, I think it's the wharncliffe

@idontno0 Жыл бұрын

Always wondered, why not just read the stats on it instead of measuring it? And weight etc

@TheSMPStudios 9 ай бұрын

I am surprised and pleased the Microtech got this knife under $200!!! Sure, they’re injection molded polymer scales. However, as soon as aftermarket scales are available I’m getting some, and at about $180 it’s easier on the pocket!

@HobbyHobbit-ue6oi Жыл бұрын

O ,great,now I want one too.

@Narrow_Gate_Forge 7 ай бұрын

"Unless you are tacticalling so hard...." lmao! You're the best.

@brandonpausta2206 Жыл бұрын

Very nice

@taydiggs9609 Жыл бұрын

Did not expect to see a Charlie reference in this video lmao

@jamesfair9751 Жыл бұрын

I actually like the filler tan just adds a little something there instead of just some holes

@rabbivj Жыл бұрын

good luck getting one, they sell out stupid quick and are re-sold WAAY above cost. There are bots that buy em all up. I was lucky to score one tho, tan with brass coating...also it is STUPID easy to take apart!

@Kens_knives Жыл бұрын

Thanks again for your time and effort to make Microtec and Tony Marfeion more money!😂😂😂 There is no way everyone will be able to get one of these for the next 5 or 10 years!

@landontreinen3062 Жыл бұрын

Lol what planet are you living on? Have you been to any retailer at all? They all have a crap load of microtechs in stock in various price ranges. It’s a brand new knife. Give them a few months and they’ll be everywhere.

@cavemandanwilder5597 Жыл бұрын

So, I actually do need washers because I work with corrosive chemicals, gritty junk, occasional sandbags…basically the whole spectrum of knife-ruining goodness. How the hell do I shop specifically for washer knives? No website will let me sort/filter by washer vs bearings.

@andrewmccormick1187 Жыл бұрын

Check for a disassembly video for the knives you really want. Also, most $50 minimum knives have at least Teflon washers. There’s also a secondary market for bearings and washers that may have solutions for your problems. Good luck!!

@markp4401 Жыл бұрын

CRK my man.

@fuhq5121 11 ай бұрын

I work in the same environment and this works well for me. The bearings are ceramic so chemicals don't have much effect. Just a can of air or dawn dish soap if it's real bad and your good.

@cycostik1483 9 ай бұрын

Skiff bearings has washers and bearings at skiff made blades

@EMFSafetyZone Ай бұрын

Super easy to take apart and put back together. My MSI puts the blade back into perfect centering every time. My favorite knife. Almost nothing he says here is accurate.

@theknifeconnection9571 7 ай бұрын

Lock stick is actually a good thing in knives like this. It nearly garuntees it wont fail on you

@RenedeDon Жыл бұрын

"It's M390 with a top hat..." I love this description!

@ernesttaylor967 11 ай бұрын

Is there any spring assist on the opening?

@PlhPatrick Жыл бұрын

All I needed to hear was I’m going to buy one, from MC!

@MrSabram07 Жыл бұрын

that is cool

@v8bmg Жыл бұрын

I hope they make a mini MSI

@Monsoonpain 5 ай бұрын

Just ordered mine...it was sold out for months !

@darrenzilisch6293 Жыл бұрын

What do you like more? The msi or the ram stitch?

@PlhPatrick Жыл бұрын

MC once said he liked the Stitch better, I believe. I would prefer the stitch blade as well. Though I’ll buy whichever I can first.

@jamesfair9751 Жыл бұрын

Would a heavier spring help give more detent and help the flipping out ?

@jamesfair9751 Жыл бұрын

Thinking back to the manix 2 it spydie flicks well and I remember thinking to myself man that lock release is hard to press. So I guess that answers my question the stronger spring in the manix 2 makes it flick better. Hope Microtech realizes this and makes a heavier replacement spring.

@thaknobodi 9 ай бұрын

I agree. Either that or needs a cam redesign on the detent to make it stay closed more strongly. Maybe in connunction with a slightly stronger spring.

@aquablaster86 2 ай бұрын

I'm the same as your brother, right handed but keep my knife in my left pocket. I use my phone way more than I use my knife, so only my phone goes in the right pocket. Knife, pen and lighter go In the left pocket.

@thisarepatar Жыл бұрын

The guy you got the knife from is a nerd! Love his desk mat lol!

@s30vguy8 Жыл бұрын

The first couple sites that these dropped on are already $150 over MSRP.

@jonthomas8487 Жыл бұрын

If someone drilled a hole in the top of that lock and tapped it for a thumb stud you’d have a Shark Lock ish deployment method

@herpingmad145 Жыл бұрын

I badly want an LUDT with this lock. No autos in Canada…

@Zero_8347 Жыл бұрын

everyone is crazy about micarta, but i think i like g10 more, it looks classy

@vr6glx96 Жыл бұрын

I wish companies would stop using bearings. There is nothing wrong with washers and in my experience, washers can be just as good, if not better. I'm one of those few that work in a very sandy/dusty and at times muddy environment and bearings do not enjoy that. I also run my knives dry (no oil) and prefer lock stick. Oil will attract more dirt and grime and lock stick is kind of an extra safety measure. I guess I'm weird...lol.

@bwd8664 Жыл бұрын

At the beginning of the video I decided to take a drink every time you said tactical because I knew you'd be saying it a few times here..... It was a mistake.

@Chris_In_Texas 7 ай бұрын

20:40 You know they could have put on a glass breaker too...... shhhhh! 😁👍

@MANNT1S Жыл бұрын

Bought on and wasn’t too impressed. Mine had lock stick, basically no detent and the clip was crap. The lock “button” is way to aggressive. It’s heavy and not practical for every day use. Sold it for $300 and never thought about it again.

@BohnsBlades Жыл бұрын

Lmao the piano threw me off

@eddcurry1245 Жыл бұрын

I love a good knife that has beauty, function, quality materials and made with care. But, I’d never pay more than $125 for an every day carry knife… However I do like looking at them.

@boatbuilding4412 Жыл бұрын

Anything over 7" w/desmopoint s is to big for me to carry. I have to carry my blades. I like it though.

@Cyanoblades Жыл бұрын

Cuz tactical!

@markanderson8677 Жыл бұрын

This is a good-looking knife, it'll be interesting to see the price.

@travisaurus_rex Жыл бұрын

$250 from Microtech

@jpolhamus71 Жыл бұрын

Needs a stronger spring

@CloudyShinobi Жыл бұрын

Man this would’ve been sooo sick if it was reverse flick friendly, such a missed opportunity. I’m sure it’ll still sell, just not to me bc of that k

@markedfortime Жыл бұрын

I only reverse flick mine to open. Thumb opening is a little awkward. The reverse flick is super easy to do if you place your finger as close to the pivot as you can. MC has a retarded reverse flick. 🤣

@techromancerzero2709 7 ай бұрын

I suspect the reason they did not conceal the spring to prevent debris entry is because they wanted to show off the mechanics of their unique system. Brand marketing, cool factor, another layer of tactical on the tactical…

@jacobcombs2269 Жыл бұрын

M390mk is just m390 with mk at the end . Coming from the same guy that made sure we saw the 'a' at aus10a and that 10 is 2 more than 8 on the demkos. Microtec will start making more knives in China if this knife shows that to be insignificant

@jamesfair9751 Жыл бұрын

But you don’t absolutely have to tactical the tactical to appreciate the ability to use with gloves. At work we have to wear cut resistant gloves and it’s nice not to have to take one off just to use my knife so I like it for that.

@megacab Жыл бұрын

No matter the price it's going to be hard to get like their other folders.

@EMFSafetyZone Жыл бұрын

The clip is just fine. What is stupid however, are the two screw heads sticking up way too high inside the top of the clip. Those catch the pants a bit. I am holding mine right now while sitting at my desk. I like it. But there is just something about the design and shape of the handle that is just a big "NO" for me. Most knives just melt into my hand and are comfortable. Even Chinese made knives. I don't know what it is, but this handle just is not friendly or comfortable. Hard to put words on exactly.