Agree mate, but it would be a different corner don't you think.

yes it also takes like 3 times as long stealing money from the customer .. its the way hacks do things to pad the bill

This welder, crawled out of a sardine can! He is funny!

Depends if its structural or not, if not you could probably put two small beads on the bottom and call it a day if its an art project and just supposed to look cool

@@taoisttiger4702 I get what you are saying but, I'd just make it out of wood and paint it silver. Less time and $.

But if you have a long piece of tube, it wouldn't fit in a bandsaw.

How exactly are you planning to cut that inside 90° corner on a bandsaw?

@@an2thea514 bend it the wrong wat, cut, bend it back

LOL "this will separate me from the status quo"...

@@bradleyakulov3618 Uh huh. LOL indeed.

Total waste of time that doesnt show skill that shows the worst longest and most expensive way to do something

mah dude. your time is money. the amount of time that he spent with a grinder just so that he could bend the piece into that shape. you're better off just figuring out how long you want your angled piece to be then run your marks to form a Y shape. don't worry about having to bend the pieces. You're welding the piece anyways and companies make flapdisks for a reason. sincerely from a fabracator with gate building experience.

I like the appearance of it. I think that it has a nicer appearance than the normal 45 degree miter. What he really did was to do two 22.5 degree miters for the corner. I think that this would look good at the top of a gate when you are using 1" x 2" rectangular tubing.

I think the word "art" might be stretched a bit here.

Yes, 4 joints and an eternity later :D

Cut the sarcasm, you know full well he doesn't own a welding machine.

I disagree, I'm fairly certain there's some metal filings from cutting as well as some oil residue from the manufacturing process of the RHS

@@rixogtr that’s not at all my perspective. As someone who knows nothing at all about welding, I do appreciate the aesthetic: I’ve seen too many unsightly welded exterior corners

@@TheEugevanz I know, it was more about a joke 😁 I was referring to what people say these days - “clean”, which is funny to me. Also from a fabricator point of view, this method is so tedious and lengthy. Might be cool for a video on a KZfaq, but practically it’s totally useless. By the time he’s got all that marked an average fabricator would probably have it all tacked and ready for welding.

@@rixogtr I find myself settling for lesser evils these days

@@TheEugevanz what are those ?

Fun, don't you get it yet?

That would make you quiet stupid wouldn't it.

For what? Structural failure? Waste of time?

@@bradleyakulov3618 how about simply because I LIKE it!!??

@@RecoveryRoomRestorations What kind of welding rod would you use for this application? Would you make the gaps larger, or would you leave them at 1/8" or 1/4" gap?

@@bradleyakulov3618 I'd use a thinner cutting blade, and MIG it with .023" ....

thank you my friend

Thank you brother

if its a shame to weld it then you need to be a better welder.

Magnetic welding holder

It's not, it's much weaker. Because of all the extra welding, you with this method get a very large area that is significantly weakened, both because the welds themselves are weaker but also because you weaken all the metal in the areas around the welds as well. So rather than a one seam that, less than an inch wide, you have this huge area that is several inches of just plain weakness. There's a reason you don't see these kind of joints in the professional world, because they serve no function. Regardless if you're after strength, looks or price, there are better options. Like, if you want the looks, do a 45 degree mitre and you use a router to get the look you want with whatever radius. If you want cheapest, just do the 45 mitre. And if you want strength, you do a sqare join weld. Even if we assume you need the straight inner flat for mounting, then you'd still be better off with doing 3 separate pieces with 2 v cuts so you avoid the bending. It's a pretty bad corner, but it's better than this.

if there were any strength concerns, you would use a thicker material or add plating either side/inside

@@radialorbits So instead of simply using the right bend, you'd rather use the wrong bend that you then have to add supports to, adding even more cost and time to the project? And it would be heavier than you'd needed it to be too so it's not even beneficial even as a personal project where time wasted is usually not a concern. And the supports means more material so more expensive too. Personal projects like that are already more expensive than you need them to be, why make them even more expensive?

@@danieljonsson8095 ooh gosh no, I'd never do this. Takes too long even for a personal project. But adding fish plates or gussets does seem fitting, don't it? 🤣 Time wasting for a worse result

@@radialorbits Oh definitely :)

"I've cut it twice and it's still too short" XD

Yes. I made a video: kzfaq.info/get/bejne/aMmggdaAndXQlZ8.html

If that’s your mentality, your missing the point.

@@jasoncampbell4723 no i am not

@@jasoncampbell4723 and that point is what

More aesthetically pleasing depending on what your building, sure 2 45’ are simpler but if your building a tabletop or desk that corner isn’t sticking out to catch you as you walk by and shows more craftsmanship than the simple corner. That’s just my opinion.

@@ScottMattes if you have to ask, you are also missing it.

Не нравится,не ешь

Because most people in Europe use cm and not mm, because the conversion from one to the other is trivial. Anyway, with that speed square, you have no mm resolution.

Yeah, some people can’t resist trying to re-invent the wheel.😂😂😂

Simple pair of 45 will give 90° angle as a result you make a rectangular shape or square by doing this you will get simply 45° joint or hexagon shape.

Right over your head. Did you actually watch the video ? Some of us are artisans and we get paid accordingly and our customers appreciate our approach.

@@kevinlwiltfong7941 do you have wagon wheels on your vehicle ? 😀

@@LemonySnicket-EUC That is a stupid question from a fool who thinks he is clever.

Not a 45

You learn on the job. School just gets you started.

Выебнуться же на камеру надо.