MG Gundam Barbatos SH Resin & Kosmos LEDs & Metal Parts Build

No video

MG Gundam Barbatos SH Resin & Kosmos LEDs & Metal Parts Build | Epic Custom Gunpla Painting

Рет қаралды 44,783

3 жыл бұрын

MG Gundam Barbatos with SH Studio Resin + Kosmos LEDs + Point Studio Metal Parts
Please Like & Subscribe for more!
Facebook: / jlgunplauk
Paints Used (Mr. Color unless specified otherwise):
White: Cool White
Light Grey 1: Custom Light Grey 3: Cool White 1
Light Grey 2: Light Grey
Yellow: Chiara Yellow 7: Orange 1
Blue: Gaianotes Blue 7: Blue FS15050 2
Blue 2: Blue FS15050
Red 1: Harmann Red 5 : Shine Red 4 : Wine Red 4
Red 2: Harmann Red 5 : Wine Red 1
Dark Grey: Navy Blue
Dark Grey 2: Gray RLM66 2: Ueno Black 1
Chrome: Super Metallic Super Chrome Silver 2
Gold: Fortune Meow Super Mirror Gold
Clear Green: Clear Green
Songs Used:
Liam Thomas - No Time
BH - Holding On
Alone by Pold
Gentl - Get To Me
N3WPORT - Power (feat. braev)

Пікірлер: 71

@MechaBorne 10 ай бұрын

Out of all he Barbs I've seen, I think this one is my favorite!

@ejrodriguez2656 Жыл бұрын

The metal parts come in several parts or kits so to speak. The cheapest is just metal joints, this one is half of the inner frame, but the most expensive is the full inner frame that is metal and that is around $65 to $59. The full metal inner frame is totally snug so you will have to file a few millimeters off some plastic parts, but most importantly rock solid.

@Soup-Zeus42 6 күн бұрын

Where do I buy this inner frame ??

@DivineWind95 4 ай бұрын

Jaw dropping stuff, well done, dude!!

@jakefoley9539 3 жыл бұрын

I think it's very smart the way you use tweezers to hold a small piece of sandpaper for sanding small areas. I'm going to start using that technique.

@ndk2k4 2 жыл бұрын

Better than most of the bigger gunpla youtuber versions of this kit. Kudos.

@chalkdemon8019 3 ай бұрын

Agreed the only two that stack up to it, is Studio G, and EA Gunpla, but I still like this one better because of it being anime accurate.

@nub_gamers5457 3 жыл бұрын

The fact that you still follow the classic colour but at the same time make it looks cool is awesome dude

@JLGunplaUK 3 жыл бұрын

Thanks, I usually stick with cannon colours!

@jasoncombs3232 3 жыл бұрын

Hell yeah brother! Everything about this video was executed perfectly 👌 nice job!

@JLGunplaUK 3 жыл бұрын

Thank you mate 👌

@aarizproject3302 2 жыл бұрын

hi, i like watching your videos. nice and neat work. beautiful video for me to watch. i hope you progress and succeed. i always look forward to your latest videos.

@d9_1056 2 жыл бұрын

Oh my GOD dude, that kit looks sick. Standing ovation man.

@fangirl988 3 жыл бұрын

Wow awesome

@wylankaochari5588 3 жыл бұрын

how does this not have more views

@JLGunplaUK 3 жыл бұрын

KZfaq doesn't like showing my videos

@mikegonzalez4940 3 жыл бұрын

That’s some eye candy right there 🤙🏼

@bongkem2723 2 жыл бұрын

amazing build and leds look so niceeeee !!!

@rexwong6265 3 жыл бұрын

Nice work 👍👍

@corvo1855 3 жыл бұрын

What a beautiful robot

@freshlubejc152 3 жыл бұрын

Amazing kit done better, as usual. 💯👍

@FKMV 3 жыл бұрын

magnificent, Bravo!

@bakaduo2978 2 жыл бұрын

Great vid! Would you ever do a video on your highlighting style? Keen to learn more about your approach (or do you do the smaller sections first, mask, work on the larger area)

@JLGunplaUK 2 жыл бұрын

I might do a video on what I do

@Akilance 3 ай бұрын

May I know what swords are those? badass work!

@omega2301 7 ай бұрын

I would like to have this made if that is possible by you what would you need on my part to get this process going

@SupriYadi-cb6tk 2 жыл бұрын

Sorry may I ask, what weapon kit are you using??

@fongyiktze 3 жыл бұрын

Well done as usual! love your work!

@grimlord8722 Жыл бұрын

Can I please know what brush you use to remove the panel liner pls

@josh8812 2 жыл бұрын

Yo man I just wanna say your work is stunning. way too incredible

@zyrabell69 Жыл бұрын

Amazing, I've been collecting and building Gundams MG/PG since 1990's. I have 20 plus on display all MG kits with rare Gundam conversion kits, all airbrushed and with waterslide decals. But your work is amazing, do you build only for yourself or sell built kits and/or accept commissions to supplement your income? I personally deal with 10 professional model builders who build for money, and they're all over the world. I've dealt with buying/selling built model kits for 23 years. I have another 400 plus rare plastic and resin kits from Japan, mostly the Wonder Festivals where you have to line up for a chance to get a very limited and expensive release.

@JLGunplaUK Жыл бұрын

Thank you! I do commissions occasionally but it can get costly for the buyers sometimes with the amount of time needed for these gunpla kits

@DeusNyx Жыл бұрын

I don't see much difference between the original armour and the resin, other than the resin is panel lined. Could it have been easier just to panel lined the armour to resemble the finished article?

@JLGunplaUK Жыл бұрын

You're right, this resin kit is mostly just extra panel line. It depends how much you value your time because it'll take some time to scribe them Vs just buying it

@Mrcrumber 2 жыл бұрын

Where the swords come i want them👍

@Jshogouki 3 жыл бұрын

I'm planning on buying the metal parts kit and the LED set. My only question is did you need to do any modifications to the metal parts to get the led kit to fit into the Barbatos?

@JLGunplaUK 3 жыл бұрын

No mod at all

@mrcapcom9870 11 ай бұрын

What were the two swords they looked awesome

@JLGunplaUK 11 ай бұрын

Not sure, think they're kotobukia

@zaimksmt9891 2 жыл бұрын

where can i get the big sword weapons? so vicious. :D

@xsinx6577 2 жыл бұрын

What are those giant swords from? I'd love to get some

@-GH05T- Жыл бұрын

Dragon Momoko United Swords

@MoPoTime 3 жыл бұрын

Looks insane, barbatos with LEDs looks very good, one of the best things you can do to your gunpla, btw what are the two swords in the end, desing looks cool.

@JLGunplaUK 3 жыл бұрын

Dragon Momoko United Swords

@alexadams2336 3 жыл бұрын

Hey bud the 2 swords you have him holding where did they come from? Thanks

@JLGunplaUK 3 жыл бұрын

United Sword by Kotobukiya or knock-off by Dragon Momoko

@chalkdemon8019 3 ай бұрын

Did you run the Metal Primer through the airbrush? If so did you thin it? What ratio of primer to thinner did you use?

@JLGunplaUK 3 ай бұрын

Just the standard levelling thinner

@Nekoroaster 2 жыл бұрын

Is it led kit comes with manual?

@calvin14888 3 жыл бұрын

I'd realized that any resin kits from SH Studio below 1/60(PG) you have to fix a lot of imperfection. And, do you have to dilute the metal primer? Any ratio?

@JLGunplaUK 3 жыл бұрын

Yes 1:1

@calvin14888 3 жыл бұрын

@@JLGunplaUK with leveling thinner?

@JLGunplaUK 3 жыл бұрын

Doesn't have to be, normal one is fine too

@BlackMantisRed 2 жыл бұрын

Why did you remove the head of the airbrush? what does that do?

@rickmagnusson3230 Жыл бұрын

What tool is that at 10:50? for cleaning up panel lines. Thank you.

@RiskBreaker22 Жыл бұрын

I'm just wondering. Can the Barbatos still be removed from the base stand after installing the Kosmos LED?

@JLGunplaUK Жыл бұрын

It's not connected to the base in any way

@GXMODS 2 жыл бұрын

Where did you order the resin kit for barbatos

@olivergoldvalente 3 жыл бұрын

Super cool video! I'm not very familiar with gunpla customizing. What's the reasoning behind the resin if you can customize the normal kit already? Are they different versions? Is one easier to paint? Thanks! Great video.

@JLGunplaUK 3 жыл бұрын

For kits like this where is just added panel lines yes you can do it yourself, but getting the resin kit saves you time. Most other resin kits change proportions and designs more so they're harder to recreate

@olivergoldvalente 3 жыл бұрын

@@JLGunplaUK awesome work! Do you ever sell your customs? I'm sure these take so much time it's impossible to value. Haha. Such cool stuff.

@JLGunplaUK 3 жыл бұрын

People don't tend to want to pay enough for the amount of work put into them

@olivergoldvalente 3 жыл бұрын

@@JLGunplaUK absolutely. Well if you ever sell this guy let me know. Haha. Looks wonderful. Worth hundreds I'm sure.