OMG is this thing going to start!? Raptor 700 Motor Part 10

Рет қаралды 25,106

Күн бұрын

Installation of a Raptor 700 motor in less than 10 minutes
OMG is this thing going to start!? Raptor 700 Motor Part 10
Well, not really, but this video is less than 10 minutes! Spent some time loading in the motor and torquing just about every bolt to service manual spec! This Hot Rods crank is going to last forever!
If you enjoyed, please comment, like and subscribe to my channel!
Thank you for watching!
Want to reach me? Email me at..
michaelsabo350@gmail.com
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / michaelsabo350
Miscellany Liquid Chalk Markers
Web: miscellanysupplies.com/
Facebook: / miscellany-supplies-39...
Instagram: / miscellany_supplies
Check out Ashley Tarot
Facebook: / ashleytarot
Music is as follows...
Track 1
Music provided by Adam Vitovsky.
Track - Rock Background Music
Link to track - • Video
Track 2
Music provided by Free Music Tunes
Track: Essence Of Datum - Animal
Link: • Video
Track 3
Music provided by SophonicMedia.
Track - Metal Background Music
Link to track - • Metal Background Music
instrumentalsfree.com
Track 4
Extreme Energy by MusicToday80: / r. . Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/... Music provided by Free Vibes: goo.gl/NkGhTg

Пікірлер: 58

@dominickguerra189 Жыл бұрын

These cheesy guitar riffs were made for this build lmao. Love watching that phat motor get put into place on this raptor!

@MichaelSabo 5 жыл бұрын

If you haven't already, follow me on instagram to see pics of the Raptor all done!!! And I know I know, the FB and insta tag is messed up in the beginning. Also, there is a thin film of anti-seize on the swingarm bolt!! I didn't film putting it on.

@Rippers12342 4 ай бұрын

Thanks man for you well made video!! Helped me a lot with my 2006 raptor 700 that i got in a box to rebuild it. I saved a lot of time with your video.😁

@MichaelSabo 4 ай бұрын

Glad my video helped you out and thanks so much for the super thanks man!!

@nelsonkarrer3143 5 жыл бұрын

Good job

@daniifernandez3 5 жыл бұрын

this beautiful the raptor, congratulations, greetings from Argentina

@lawrencestoner2678 Жыл бұрын

another great video my man!

@MichaelSabo Жыл бұрын

Thank you brother 🤘👊

@blackbartbartholomew7122 5 жыл бұрын

Mike, you keep doing this stuff you need to invest in a atv lift. I would if I were you. Great Vids, I learn a lot!

@yansheeold_b9147 5 жыл бұрын

awesome fromm paris

@legacygarage5056 5 жыл бұрын

It started !!!! Dope

@noelshed689 5 жыл бұрын

Nice one 1 cool raptor

@33boblong 5 жыл бұрын

Awesome video Michael an that's great glad u got it done an up a running

@lifeatv 5 жыл бұрын

Love the look with the graphics! Quad looks awesome, trying to do the same with my 2006 TRX 450.

@Sciitch 5 жыл бұрын

Coming together nicely! Got my own raptor after watching all your videos, love your diy style! Keep up the good work, looking forward to the running videos 😀

@victorgerhardt1504 Жыл бұрын

Looking Mean!

@MichaelSabo Жыл бұрын

🤘🤘

@The700XXrider 5 жыл бұрын

It's always awesome to hear one fire up for the first time after all that work. Great job!

@Corpse1984 5 жыл бұрын

Cartman should have popped in while Mike was carrying the motor and yelled "BEEFCAKE!"

@ELViSLOK 5 жыл бұрын

Nice!

@AaronMartinCOOLVIDEO 5 жыл бұрын

Sounded pretty good for a few seconds you had it running after all the work they put into that bike I'm pretty sure it will last you a good long time nice job. 😎👍💯

@MichaelSabo 5 жыл бұрын

Thanks man; I hope so too!

@isaacmolina9097 5 жыл бұрын

Whats up michael sabo great vids keep Up the good work!!!

@bdogjr7779 5 жыл бұрын

Awesome Mike 《☆》

@1XMuleX1 5 жыл бұрын

OHHHHHHHHHHH YEAAAAAAAAAAA!

@bricehale6593 5 жыл бұрын

Nice to see you get it up and running man I just sold my 2003 660 for two grand and bought an 04 660 with a 686 Big Bore Kit for 500 bucks it runs but when it gets warmed up it starts spitting and sputtering and dies out on me I'm hoping a new carburetor with a 686 jet kit will fix it may make a video on it but congrats on the Raptor project turned out nice you do good work bro

@xtune5731 5 жыл бұрын

Brice Hale new carb? Why not just clean it out

@bricehale6593 5 жыл бұрын

Turned out as blown head gasket paid 500 for it sold for a thousand

@briancrouch6146 2 жыл бұрын

Michael I just put new jug where is head oil bleeder bolt

@redman8745 5 жыл бұрын

Good shyt✊🏽

@dallinbrimhall1033 5 жыл бұрын

Awesome to hear it start!! And just like the rest of the commenters you should have greased the swingarm Bolt Edit: saw the other comment about the anti seize on the pivot Bolt so nevermind

@Davido50 2 жыл бұрын

It just purrrrrrrred. Great engine build & typical Yamaha engineering excellence!

@gokartvdz2211 5 жыл бұрын

raptor 700 part 700 :)

@daddydubz88 5 жыл бұрын

Your videos are awesome and Thank you for taking the time to make them. Very educational and well edited. My only problem with the build is with all the internal upgrades you did you didn't do any work to the head, no larger throttle body, no full exhaust, and no intake? Seems like those internal upgrades are going to no use.

@MichaelSabo 5 жыл бұрын

Thanks so much for the love man. It is mostly because of money that I didnt do further upgrades. This quad was supposed to be a quick flip and turned into more of a project. I didnt want to cheap out on the piston but if I had more money for the build I would have done more.

@DirtbikeNb 5 жыл бұрын

No grease on swingarm bolt? You have huge nuts 🤣

@MichaelSabo 5 жыл бұрын

I did coat it with anti-seize, just didn't film it.

@kenancoskun1913 4 жыл бұрын

I know how hard it is to fit the engine bolts into the frame😭

@rpmjunky2795 5 жыл бұрын

Please tell me you didn’t put that swing arm bolt in dry☹️

@MichaelSabo 5 жыл бұрын

Everyone is saying this!!! I coated it with anti seize but did not film it! 😂

@rpmjunky2795 5 жыл бұрын

Haha😂. So this mean your getting rid of the banshee now? I’ll take it off your hands blown or not

@darkrider6201 4 жыл бұрын

Hi, 🙋‍♂️how many ft pounds the Swing Arm bolt?

@thegoodjelly4950 5 жыл бұрын

Things dope though I have a 660 and these raptors are nasty

@arneallaloo7525 4 жыл бұрын

Hey, Hope everyone is well, am could some1 help me with the wiring for the quad? The Wires from the left side of the engine i took apart mines and cant remember the cfoonections, can some1 help me plz?

@matthockey84 5 жыл бұрын

Im currently doing a rebuild on my 04 YFZ450 and when I put my cases back together my crankshaft is hard to turn by hand. In order for me to turn it smoothly I need to use a wrench with the right size nut on the end of my crankshaft. Is this normal? If not how do I make it so I am able to turn it by hand easily?

@MichaelSabo 5 жыл бұрын

Well, definitely don't force it. I would start by making sure it isn't in gear and then make sure your counter balances are in correctly. It's possible your cases aren't seated right. It should spin freely in neutral.

@matthockey84 5 жыл бұрын

Michael Sabo my cases are in correctly and the engine is in neutral. I have a small gap on the right side of the crankshaft when your looking at it from the hole where the rod is suppose to sit. The gap on the right it bigger than the one on the left. Do you have any tips on making it even without separating the cases again?