Micro Camper Build | How much did it cost?

Micro Camper Build | How much did it cost? | Cost Breakdown!!

Рет қаралды 51,405

Күн бұрын

Trailer Blueprints available on the website!
www.adv4x4.us
Detailed Trailer Build Series linked below
Part 1
👇🏼
• Micro Camper Overland ...
Part 2
👇🏼👇🏼
• Micro Camper Overland ...
Part 3
👇🏼👇🏼👇🏼
• Micro Camper Overland ...
Part 4
👇🏼👇🏼👇🏼👇🏼
• Micro Camper Overland ...
Part5
👇🏼👇🏼👇🏼👇🏼👇🏼
• Micro Camper Overland ...
You can find me on Instagram here
👇🏼👇🏼
adv.4x4?r=nametag
‼️Complete Parts List‼️
Some of these are affiliate links so by using them to purchase Items I get a very small commision at NO EXTRA COST TO YOU Its a great way to suppprt the channel!
Metal Supplier
bmgmetals.com/
Timbren Suspension Used
www.etrailer.com/Trailer-Axle...
Aluminum Composite Paneling
www.piedmontplastics.com/?gcl...
Aluminum Trim Part# HT11-02
www.teardroptrailerparts.com/...
Fenders Part# FN04
www.teardroptrailerparts.com/...
Door Part # FC14
www.teardroptrailerparts.com/...
Window Part # WDRV2420
www.teardroptrailerparts.com/...
Vent Fan Part # FAN20
www.teardroptrailerparts.com/...
Toyota Bolt pattern Hubs
amzn.to/3P4Hape
Lugnuts fto run Toyota wheels
amzn.to/3MOLgjo
Welder
amzn.to/3sgxCOg
Digital Level
amzn.to/3wbTmMb
Craftsman Restorer (to clean Millscale)
amzn.to/3yhdz61
Wheel for Craftsman Restorer
amzn.to/3KR1E1d
Steel-It weldable Paint
amzn.to/3LZl1Xp
Gussets
amzn.to/3LSE4CL
Rear Hitch
amzn.to/38h063k
Tabs to mount moto carrier
amzn.to/3ympYWq
Removable tongue jack
amzn.to/3vOE1Cm
Tap magic
amzn.to/3FxfqW0
Primer
amzn.to/3sKmFEV
Raptor Liner Kit
amzn.to/3wBTBln
Taillights
amzn.to/3wyXk1L
Marker Lights
amzn.to/3Mx04Dr
Wiring Harness
amzn.to/3NqdKjS
7 Pin Harness with Junction Box
amzn.to/3woAECl
VHB Tape
amzn.to/3mZAWKl
SikaFlex 221
amzn.to/3O4q0qS
135° Aluminum angle
www.outwater.com/products/zz-...
Fastener for tongue and groove
amzn.to/3zdE2BC
Rivnut tool
amzn.to/3uVtS60
Sleeved Wire
amzn.to/3BNWYse
Heat shrink connectors
amzn.to/3d63ekN
Circuit Breaker
amzn.to/3zFt6vm
Dimmer Switch
amzn.to/3SAoKi2
8 Guage wire
amzn.to/3BIEOrJ
Coat hooks
amzn.to/3p1eTE6
Copper wire Lugs
amzn.to/3JBtIa2
Folding cup holders
amzn.to/3Quipml
Shelf brackets
amzn.to/3Quipml
Ceiling lights
amzn.to/3dfo4OV
Battery Bank
amzn.to/3zzWX8B
Cigerette lighter plug
amzn.to/3P5cQcI
#microcamper #overland #diy #teardropcamper #costbreakdown

Пікірлер: 110

@Adv4x4 Жыл бұрын

Thanks for watching guys! Don’t forget to subscribe. If you feel I left anything out drop a comment below and I’ll get back to you. Blueprints for the build are available 👇🏻👇🏻👇🏻 www.adv4x4.us

@krustysurfer Жыл бұрын

Awesome build! Thank you for the honest discussion and real world time expenditures. Great Video friend! Aloha

@Adv4x4 Жыл бұрын

Thank you man! Appreciate you watching.

@MoonRambo702 Жыл бұрын

On ur next project where you do some welding, could you please go a little more in-depth on your welding setup. Ur vids are awesome, the detail really gives me a bit of confidence I could do it too. Appreciate you sharing. I have a small utility trailer I’m gonna do a super budget overland-ish to test my abilities before I decide to do a real build.

@Adv4x4 Жыл бұрын

Sure thing! Thank you! Good luck on your build. Best thing you can do is practice!

@MoonRambo702 Жыл бұрын

@@Adv4x4 definitely will, hoping to snatch up a black fri deal

@Montana_Outdoor_Adventures Жыл бұрын

Let's assume you have 100 manhours, and just for arguments sake, we will bill this at $35 dollars an hour, for a total labor cost of $3,500 dollars, added to the material cost, and you end up with a quality camper that is WAY better than anything on the market today, and, in some cases, less than HALF the price. And the satisfaction of a job well done. This is why my wife and I do EVERYTHING ourselves here on our small ranch. Once again, fantastic job!!!

@Adv4x4 Жыл бұрын

Thank you Charlie! Something about doing something yourself makes it 100x sweeter. Even if it’s not “perfect” it’s 100% yours

@Montana_Outdoor_Adventures Жыл бұрын

@@Adv4x4 "it’s 100% yours" ...and that, my friend, does indeed make it "Perfect"!!!

@ENVY____ Жыл бұрын

Regular self employed fabricators work for over triple that salary too lmao

@Montana_Outdoor_Adventures Жыл бұрын

@@ENVY____ I was being conservative, as a Journeyman pipefitter/fabricator and a Millwright, I can confirm you are correct.

@komeilrahmdel3091 Жыл бұрын

Thanks buddy; you are not only a good builder; you are also a good instructor.

@mikemorgan4670 Жыл бұрын

Very detailed and comprehensive. Real leg up for anyone wanting to take on such a project. Good work.

@Adv4x4 Жыл бұрын

Appreciate you Mike!!

@gusgarcia6163 Жыл бұрын

Great break down of the cost, your camper is simple but built really well. Awesome work and thank you for the short and to the point videos.

@Adv4x4 Жыл бұрын

Thank you sir! I try to keep them information oriented!

@ct026 Жыл бұрын

Absolutely fantastic result. A job well done my friend. Congrats from across the pond. 👍🏻👊🏻

@Adv4x4 Жыл бұрын

Thank you!

@mikesnifferpippets3733 4 ай бұрын

Thanks for update, very interesting.

@ernestrichendollar8177 Жыл бұрын

Great video! Very informative! Thank you!

@Adv4x4 Жыл бұрын

Glad you found it useful!

@RustyShackleford382 Жыл бұрын

I like that you took the time and used quality materials to make yourself something that will outlast Any wood built one on the market

@Adv4x4 Жыл бұрын

Thank you!! Exactly what I was going for

@derrickkoppes4639 11 ай бұрын

🎉 The Fireball Tool square!! For the win

@alienxyt 11 ай бұрын

Watched your build series. Well done!

@Adv4x4 11 ай бұрын

Thank you!

@MicahBell_1860 Жыл бұрын

Great video. Eye opener

@Adv4x4 Жыл бұрын

Camper prices start to look more reasonable once you see the cost to build!

@MicahBell_1860 Жыл бұрын

Yeah@@Adv4x4 I was expecting about $3,500. Still, that 6 isn't too bad considering the quality parts. My daughter wants me to build one so we can go camping like you. I think she is over our 8 man tent, because it takes forever to set up & pack

@Adv4x4 Жыл бұрын

Those 8 man tents are great for space. But definitely more of a hassle to setup/breakdown. That’s how I camped my whole life until I was 22 and finally got a rtt 😂

@braddoughman6114 Жыл бұрын

Very nice MICRO that camper will last a long time nice professional build

@Adv4x4 Жыл бұрын

Thank you Brad!

@harrymills2770 Жыл бұрын

"Spend more on?" Who you callin' a moron? Figure 100 hours at $50/hr and the total comes in around $11,000, with about half of it labor. You have a real talent for the work and the video presentation. Very impressive, young man.

@HebrewSamurai Жыл бұрын

What a sick build! Looking into making something similar but mounting it on a flat bed truck instead of a trailer

@Adv4x4 Жыл бұрын

That will make things much simpler not having to make a trailer frame!

@jmsfabrication7821 4 ай бұрын

@@Adv4x4Or a suspension!

@ExtremelyAverageMan Жыл бұрын

Sub'd! Awesome channel man, watched this series and a few of your other vids. After making a camper shell on my '09 2.7 Reg cab Taco, I've been flirting with the idea of making a small camper as you have (plus the girlfriend wants more space, especially with my dog haha, gets pretty cramped with camping trips, especially with gear). Thanks so much for putting this together, really great info here. You're a lot like myself!

@Adv4x4 Жыл бұрын

Appreciate it man!!! Lots of fun doing diy projects as you know haha. Appreciate you watching!

@kevtom1686 Жыл бұрын

This is pretty cool. Also pretty spendy. Thank you.

@Adv4x4 Жыл бұрын

It’s nice to see the real cost!

@librado06 Жыл бұрын

Wow I just watched the whole series and honestly I thought it would have cost more nice. I'm about to start a build myself just got the trailer to start 🤞

@Adv4x4 Жыл бұрын

Much cheaper then buying one outright! Haha

@justinlawliss3553 Жыл бұрын

I think that price is very cheap, especially since Covid. All prices are insane now. Plus if you have all the tools, that looks like a fun build. Nice job on the trailer.

@Adv4x4 Жыл бұрын

Was a blast to build!

@jacklundy6130 Жыл бұрын

Nice Job

@Adv4x4 Жыл бұрын

Appreciate it Jack!

@danielwhipple9985 Жыл бұрын

How much does it weigh? And what’s the measurement from outside wheel to outside wheel

@marcn5733 Жыл бұрын

Great series of videos on this little trailer. I appreciate the detailed cost breakdown -- you went into way more detail than any of the similar videos. Did you ever weigh the finished trailer? Very curious how much she weighs.

@Adv4x4 Жыл бұрын

Thanks Man! Details are what I enjoy!! Still haven’t had the chance to weigh it🫣 for sure under 1k lbs!

@marcn5733 Жыл бұрын

@@Adv4x4 Watched the timelapse again...a single sheet of ACM doesn't flex too much as the floor? That surprised me -- I would have thought it would flex too much.

@Adv4x4 Жыл бұрын

After the ACM then insulation board, then the hardwood floors it’s plenty stout!

@mctdj78 Жыл бұрын

Can you build one that can connect to a E bike

@edwardpilck8351 Жыл бұрын

Did you use a cad program to design and build your trailer and if so what was it. And you trailer looks great 👍

@INaClI Жыл бұрын

Did you have an app that you designed the measurements on if so that wouod be appreciated

@markbraun9588 2 ай бұрын

Great build. Currently trying to design a trailer. For your aluminum composite, what thickness did you go with? 3mm vs 6mm. How is the raptor lining holding up?

@phillipstuart3318 Жыл бұрын

Looks great Where did u buy the aluminum panels for the outside Thx

@Adv4x4 Жыл бұрын

Thanks! Check the description all parts linked!

@turneynicholas 3 ай бұрын

When you factor the cost of buying something similar would be upwards of 10k I say it's a good price to build your own

@JesusChrist_IsTruth-LoveForALL Жыл бұрын

💪

@dirtrusty7228 Жыл бұрын

I just built and sold a 5x8 teardrop camper. I was surprised at the prices for the supplies. $800 in Filon, $500 for a door, windows were $200 each, plywood was $100 a sheet. I finished with $5200 in it and sold it for $6000. Not something I would do again.

@Adv4x4 Жыл бұрын

No doubt! Adds up fast

@fatarsemonkey 7 ай бұрын

How much travel do you get out of that suspension?

@user-ks1yw8zb4h 10 ай бұрын

@Adv4x4 Whats the final weight of the camper?

@lucianbeilic4781 Жыл бұрын

Did you ever weight it?

@chriscampbell1455 Жыл бұрын

I want to get into projects like this but I've never welded and know almost nothing about it. Did you use flux welding function in these videos or MIG? Any advice for starting welding would be awesome! Thanks

@Adv4x4 Жыл бұрын

I used MIG! It’s worth buying the gas and welding with MIG you will see much better results then flux core welding! I use a Klutch welder from northern tool. Cheap unit!

@rjlindner757 Жыл бұрын

The plastics he used for the outside walls did he have to paint them or dos the writing peel off in a big film strip?

@Adv4x4 Жыл бұрын

The panels are 3mm aluminum composite sheets! The film peels off to reveal the white coating, I did not have to paint!

@CarlCumby 3 ай бұрын

Curious how that Alupoly composite sign board has held up as the exterior sheathing on this, might use it for my own build, seems like a nice light alternative to plywood.

@Adv4x4 3 ай бұрын

It’s held up great! No issues at all

@tolson-vkn Жыл бұрын

Discovered your time lapse and now consuming more of your content. Have you ever gotten a laden and unladen weight? Great stuff would like to consider getting your plans someday.

@Adv4x4 Жыл бұрын

I have not! According to my math it comes in under 1000lbs

@tolson-vkn Жыл бұрын

@@Adv4x4 great thanks! I am looking to build something very light for pulling behind an EV6... Still very early stages but I may be buying your plans and modifying to optimize for me needs. Thanks!

@Adv4x4 Жыл бұрын

Awesome!! Goodluck!

@SupaSargeakaQ Жыл бұрын

I would love build something like but a little bigger for my four nieces

@Adv4x4 Жыл бұрын

Go for it man! Fun project

@SupaSargeakaQ Жыл бұрын

@@Adv4x4 currently trying to learn how to weld so that I can do something like this

@sizzlerjest Жыл бұрын

Nice stuff. Are you able to build it for me?

@MrTaylorbrown100 Жыл бұрын

What hitch did you use up front?

@Adv4x4 Жыл бұрын

Everything is linked in the description! But I used lock n roll hitch systems

@adrianlecuyer Жыл бұрын

What's the dimensions?

@koalafan1576 Жыл бұрын

I have only stick welded, but with the wire welding (mig, tig, what ever it’s called) can you do just the wires with no gas? I thought you could.

@Adv4x4 Жыл бұрын

That would be considered “flux core” welding. Yes it works, but the results are less then desirable in my opinion. You are much better learning & will yield much better results on a MIG (Metal In Gas) setup!

@koalafan1576 Жыл бұрын

@@Adv4x4 thanks.

@koalafan1576 Жыл бұрын

@@Adv4x4 oh, do I have to purchase the tank and then buy gas or do they (companies) rent the tanks?

@squidtrader7973 Жыл бұрын

Where did you get the camper door without ordering from dealer?

@Adv4x4 Жыл бұрын

Check the description of the video! Everything linked there

@forestfriend2000 Жыл бұрын

How does a trailer behave at speed?

@Adv4x4 Жыл бұрын

It does well! It’s been 80+ mph no issues

@shawnfortier7011 Жыл бұрын

Is it for sell as it looks awesome or even do you have any blue prints? I would love this to camp in northern ontario canada

@Adv4x4 Жыл бұрын

Thanks Shawn! Check the description of the video I have links to blueprints! The camper itself is not for sale

@elizabethcortes5364 Жыл бұрын

After the micro campers complete what is a fair price that this micro camper could sell for?

@Adv4x4 Жыл бұрын

That’s hard to call honestly! Depends on what someone is willing to pay. Don’t plan on selling though! Love it too much

@2truckie Жыл бұрын

Any idea on the weight?

@Adv4x4 Жыл бұрын

If I had to guess somewhere under 1k lbs

@edgarmedina1934 Жыл бұрын

Did you put any breaks to your trailer?

@Adv4x4 11 ай бұрын

I did not!

@twayland6186 Жыл бұрын

The price isn't that bad. Theres some tiny coleman campers near where I live that are just a little bigger but costs 15k or 16k. They have a rear kitchen and an ac unit (that runs off shore power). Not worth it imo

@Adv4x4 Жыл бұрын

Right! DIY price is very reasonable. Once you build one you can start to see why they are priced the way they are after you calculate material cost and labor

@JackRLawson Жыл бұрын

How many hours did it take to build?

@Adv4x4 Жыл бұрын

I did not keep track on this one but it was definitely more then my last build which was I think about 60 hours. Doesn’t seem like much but an hour or 2 here and there is how it went so that can stretch things out a bit

@JackRLawson Жыл бұрын

@@Adv4x4 Thanks! I really want to build one and might follow along with what you did! Awesome job.

@Adv4x4 Жыл бұрын

Appreciate it man! It was a lot of fun to built