Micro Foamie Vespa Teardrop Trailer Time Lapse Style FULL build. Poor Mans Fiberglass

Рет қаралды 960,774

2 жыл бұрын

Enjoy a quick look at the process of bringing this fun trailer to life! If you haven't watched the tour of the completed trailer please do so. There will be additional build videos coming!
Check out the other videos here:
Micro Vespa Teardrop Tour: • Micro Teardrop Trailer...
Poor Mans Fiberglass Tutorial: • Poor Mans Fiberglass P...
Best Adhesive for Foamie: • NOT Gorilla Glue! Watc...
Check out my other teardrop trailer: • Home Built Teardrop Ca...
Poor Mans Fiberglass tutorial: • Poor Man's Fiberglass ...
Products used:
Power inlet port: amzn.to/3oPYX74
Titebond II (Wood Glue): amzn.to/3y3TgX9
Canvas Drop Clothes: amzn.to/3JVCMGr
Smooth Roller Covers: amzn.to/33jSzhl
Roller Extension: amzn.to/3zHXipx
This build is a collaboration that I did with Tom from "The Tiny Side of Tiny". He wanted a teardrop trailer to pull with his Vespa!! We ended up building this out of foam (foamie), aluminum and canvas (Poor mans fiberglass)!
As an Amazon Associate I may earn a small commission from qualifying purchases.

Пікірлер: 687

@oddojaggins 2 жыл бұрын

I've been trying to figure out how to make a small teardrop for two that could be towed by a smaller car, so glad I found this channel. That poor man's fiberglass is genius and I am now a subscriber. Thank you for your hard work

@thelwood 2 жыл бұрын

Thank you!! Good luck with your build!

@metric7278 Жыл бұрын

@@thelwood Great videos. Do you think if it's possible to PMF over Foil Faced Polyiso boards? thank you

@thelwood Жыл бұрын

@@metric7278 I am not sure, I have never worked with it to know if the foil could separate. I would do a small test sample before using it! Best wishes!

@TheRebelmanone Жыл бұрын

@@metric7278 Good question. But based on what i have seen with those foil faced foam when it gets a little exposure it peels off. But of course if you PMF a drop cloth without sealing it with paint it would most likely behave the same as the foil and peel off. If the wood glue and drop cloth sticks to the foil and the foil sticks to the foam, and then you seal it with paint it should be good. Like Lucy said, would have to try it to see. Use a small piece for a mock up test.

@ASKWildeHilde 2 ай бұрын

My crazy idea watching this...recycled blue jean denim for the canvas parts ..or seams or wallpaper inside 😅😊😜

@scottmasson3336 2 жыл бұрын

Your Poor Man's Glassfibre was the standard deck covering for small yachts before WW2. It was used over plywood.

@thelwood 2 жыл бұрын

Yes! It can be very strong when applied well 😃

@rickdancingwolf 2 жыл бұрын

@1980Baldeagle 11 ай бұрын

Your saying that the decking was plywood with fabric and paint?

@Zachry86 11 ай бұрын

Do you know what it is/was called? Ive been trying to reasearch this as I was invited to help make the roof of a traditional small wooden boat this way. We used canvas and linseed oil paint.

@cameronwatt8823 11 ай бұрын

@@Zachry86look for yachting books by Harold Augustin Calahan. It's been a few decades but I believe The Ship's Husband describes the process.

@graystone3048 2 жыл бұрын

By far the coolest foamie build on KZfaq!! Your skills are masterful. What an awesome project.

@thelwood 2 жыл бұрын

Thank you so much!!

@jonathandarcourt 2 жыл бұрын

@@thelwood nn. Anne

@jonathandarcourt 2 жыл бұрын

@@thelwood nn. Anne

@cubgsan Жыл бұрын

Good day to you. I am a senior rider on HONDA Cross Cub from Japan. Enjoying touring ,camping and video uploading. This is so nice video! Awesome!! Thank you so much for sharing!! Have a nice day my friend!!

@thelwood Жыл бұрын

Thank you so much! Happy travels!

@waterboy8999 2 жыл бұрын

Great work guys! I like the fact that you respond to every comment. Too many channels don't even acknowledge the many positive comments they get. Best wishes from Scotland.

@thelwood 2 жыл бұрын

Thank you so much! Someday I want to travel to Scotland! Looks like such a beautiful place!

@waterboy8999 2 жыл бұрын

@@thelwood thank you, it's not too bad.

@jackflak 2 жыл бұрын

Such a groovy project.. I'm a welder fabricator by trade I certainly appreciate the amount of work skilled work involved.. very nice.. trailer is possibly light enough to be towed behind a bicycle as well .. a cool thing it is..

@thelwood 2 жыл бұрын

Thank you so much!

@jailtonpulino7135 2 жыл бұрын

Ficou muito pesado pra uma vespinha

@danielfraticola1395 2 жыл бұрын

@@thelwood cuanto pesa el remolque y a que velocidad andas desde argentina un abrazo

@jayh9529 2 жыл бұрын

Paul elkins channel may help

@ricardogarcia183 2 жыл бұрын

@@jailtonpulino7135 vc sabe cuanto pesa?

@redmatters9318 2 жыл бұрын

A bit like bread and jam pudding- poor man's pudding- simple but delicious. Lot of skill need though to make such a teardrop. Nicely done mate. G'day from Australia 🇦🇺. :)

@thelwood 2 жыл бұрын

Thank you so much!

@CaptVB 2 жыл бұрын

Learnt the skill of making caravan a home in Australia🇦🇺. Love your work. Love from India🇮🇳. Regards

@thelwood 2 жыл бұрын

@@CaptVB Thank you so much!

@datBoondockingdiva Жыл бұрын

Love it ✨️As a digital nomad + part-time vanlifer, this is exactly why love my Honda motorcycle. I'm a newbie rider, but can't wait to try something like this! Thanks 😊

@thelwood Жыл бұрын

Thank you! And good luck! I am about 90% finished with my van conversion and I am taking it in its maiden voyage tomorrow!

@TheRebelmanone Жыл бұрын

I love the bicycle innertube you used for a rubber seal on the galley lid. And of course the entire walls and ceiling made of almost 100% foam.

@thelwood Жыл бұрын

Thank you!

@gorgeousdzastr 2 жыл бұрын

That was such a nice build. Very efficient and compact. I am now considering building something like that for my motorcycle..

@thelwood 2 жыл бұрын

Thank you!! I hope you enjoy your build!

@markjob6354 2 жыл бұрын

The amount of highly focused, highly skilled, intense labour was enough to turn me off. I got tired just watching all the work that went into this epic trailer build. Great results of course ! 👍 The trailer looks amazing ! 👌

@thelwood 2 жыл бұрын

Thank you!

@michaelvollmer9491 2 жыл бұрын

Guys, this is without any doubt the most fantastic teardrop trailer for an icon like the vintage vespa. I was watching your video with open mouth and i am amazed by the idea of building this and your Skills 🙋🏻‍♂️😎🇩🇪

@thelwood 2 жыл бұрын

Thank you so much!! It was a lot of fun!

@keithkocher9251 2 жыл бұрын

Your ideas and team work is very impressive. Thanks for sharing.

@thelwood 2 жыл бұрын

Thank you! It was fun! I am happy we were able to work so well together:)

@williamlott7612 2 жыл бұрын

Very cool. My wife calls projects like this “couples therapy.” Darlington, South Carolina

@thelwood 2 жыл бұрын

Thank you!

@rickwilliams696 2 жыл бұрын

So incredibly proud of your talent!!!

@thelwood 2 жыл бұрын

Thank you!!

@JulieWallis1963 2 жыл бұрын

Oh I could just imagine the fun my husband and I could have in this, such a sweet little unit for a couple.

@thelwood 2 жыл бұрын

It would definitely be cozy for a couple!

@Chocobo18 2 жыл бұрын

Wow! The quality of work and the results!! Awesome!

@thelwood 2 жыл бұрын

Thank you!

@fookingsog 2 жыл бұрын

Super Cool to *ACTUALLY SEE* how the PMF is applied!!!😁👍🏻

@thelwood 2 жыл бұрын

Thank you! I will do a detailed video on that step too! :)

@rickwallace3102 2 жыл бұрын

Thank you, this is the first time seeing this technique. Now to do the research and design a tiny trailer to be pulled with my bicycle.

@thelwood 2 жыл бұрын

Thank you! Have fun building your trailer!

@bentsprockettech 2 жыл бұрын

That's beautiful. I'm a Vespa fan. Thanks for sharing this with us.

@thelwood 2 жыл бұрын

Thank you!

@cliffp.8396 2 жыл бұрын

Nailed the 'lite weight' concept, very nicely done.

@thelwood 2 жыл бұрын

Thank you so much!

@GTWoodshop 2 жыл бұрын

That's awesome, well done Lucy, I bet he's blown away. 👍😎

@thelwood 2 жыл бұрын

Thanks Graham, I am just hoping that he doesn't end up literally blown away 🤣

@GTWoodshop 2 жыл бұрын

@@thelwood 🤣🤣😢😢😢

@TheJosesantiago123 Жыл бұрын

That’s a FOAMTASTIC build. Just perfect 👍.

@thelwood Жыл бұрын

Thank you!!

@Splits-man 2 жыл бұрын

I think, without a word of a lie that is the most amazing build I have ever seen. A massive job well done. Have you used it yet?

@thelwood 2 жыл бұрын

Thank you so much! Tom has used it on several camping adventures already!

@SMMUNIZ 2 жыл бұрын

Thank you for sharing your amazing project. I really enjoyed watching it!

@thelwood 2 жыл бұрын

Thank you so much!!

@Hadassah-KaquoliMReno 11 ай бұрын

Y’all did a great job, I was wondering how to build a light weight trailer and you did it! Bravo!

@thelwood 11 ай бұрын

Thank you!

@neilkennykenny4113 10 ай бұрын

The foam and fibre glass combo is genius, the trailer needed to be very light in order to be pulled by a small scooter. I love it.

@thelwood 10 ай бұрын

Thank you!

@wanderingrebelinvestigatio2071 5 күн бұрын

I'm actually currently working on building my own foamy poor Man's fiberglass teardrop camper for a motorized bicycle

@thetinysideoftiny7625 Жыл бұрын

This is going to hit a million views for sure 😁

@riverbottomband 8 ай бұрын

Beautiful job and great workmanship. Mist of all i want to bring attention to your out of this world patience with all the idiotic comments. Outstanding on all levels. Great work. Awesome little toy. Be proud!!!

@johnw65 2 жыл бұрын

WOW, Beautiful Job guys! My Cargo/Camper trailer conversion is quite heavy in comparison...

@thelwood 2 жыл бұрын

Thank you! It was fun!

@garretcastlebright8996 Жыл бұрын

Very creative and excellent craftsmanship. Fun to see it come together. Congratulations on a great job.

@thelwood Жыл бұрын

Thank you!

@user-ld3yz1xt7z 2 жыл бұрын

最高です💯

@thelwood 2 жыл бұрын

Thank you!

@arjen-de-vries 2 жыл бұрын

I absolutely love this vid. I know how much satisfaction it gives to build your own teardrop. I am finishing my aluminum teardrop these days. Hope to make some small build vid as well. Following Tom’s videos as well. Very nice.

@thelwood 2 жыл бұрын

Thank you so much! It is so satisfying to build something!

@widearchshark3981 Жыл бұрын

How did you get on? Did you make a video?

@oakmaiden2133 Жыл бұрын

Gosh, I would love this for my Chevy Spark! At 60 tho, a little beyond my skill set. I want to get back to camping so bad. Putting up a tent is getting hard on my shoulder and I feel vulnerable in one. A bear hot pocket lol. Day trips just aren’t the same. I wanna see the stars again.

@thelwood Жыл бұрын

I hear you! I don't want to sleep on the ground any more!

@donboggs3880 4 ай бұрын

Wow! That was fun! Build me one quick. I got a kick out of the" taping of the outer roof gluing, taping part", especially the "tape hander outerer! Great job and I appreciate the sharing.

@thelwood 4 ай бұрын

Thank you! The tape hander outer was a critical role😂

@Road_Rash 10 ай бұрын

I'd love to build something like this to pull behind my Road King... that would be awesome!

@edwardvaldiviez1137 Жыл бұрын

I'm speechless what craftsmanship

@thelwood Жыл бұрын

Thank you!

@shaunhall960 2 жыл бұрын

Thanks! Going to be doing this!

@lucasferreira7820 2 жыл бұрын

Curtindo cada detalhe aqui do Brasil🇧🇷🇧🇷🇧🇷 (Enjoying every detail here in Brazil🇧🇷🇧🇷🇧🇷)

@thelwood 2 жыл бұрын

Thank you!!

@zoltankaparthy9095 2 жыл бұрын

Beautifully constructed. Quite a team.

@thelwood 2 жыл бұрын

Thank you!

@dereksmith3316 Жыл бұрын

After a year how is it holding up? Any issues with the foam? I’m wondering how you water proof the walls? Also how does it do at high speeds? What was your maternal cost?

@thyminator420 2 жыл бұрын

Fantastic idea ! This trailer looks so awesome , Italian style , big lover of piaggio , drive for myself a piaggio trike .

@thelwood 2 жыл бұрын

Thank you so much!

@AlexT-md9df 2 жыл бұрын

That was awesome! Looking for something similar for my 2 door Suzuki sidekick. I’m going to attempt this!

@thelwood 2 жыл бұрын

Thank you! Enjoy your build!

@tarawakefield4383 2 жыл бұрын

That is just incredible!

@thelwood 2 жыл бұрын

Thank you!

@horaciobushcraf9951 2 жыл бұрын

Genial, muy buena idea, gracias por compartirla, saludos desde Córdoba Argentina...

@thelwood 2 жыл бұрын

Thank you!!

@energy2843 2 жыл бұрын

😃👍Hey man, just came across your vids. Amazing and inspiring to watch your adventures, the calm, the practicality and the simplicity. Great example and reminder what life is all about too, away of the rush, standards and social pressure most live everyday. Beautiful build and very cool look, so inspiring to see how carefully and thoughtful are all those gadgets you fitted. I see preparing simple but tasty meals are your thing😁 From my biker side, only can wish you many more rides and adventures🙏✌️👊🛵

@thelwood 2 жыл бұрын

Thank you so much! We had a lot of fun building this! Tom is having a great time traveling around and making his masterpiece piece meals!

@WoodcliffCommunity Жыл бұрын

Amazing skills and craftsmanship, just awesome!

@thelwood Жыл бұрын

Thank you!

@leonardarola 2 жыл бұрын

Simply gorgeous.

@thelwood 2 жыл бұрын

Thank you!

@clintstinytrailerconversio5560 7 ай бұрын

Nice work and very clear instructions, Lucy.

@thelwood 7 ай бұрын

Thank you so much!

@chrisgenovese8188 2 жыл бұрын

omg, this is so charming! love it. my curiosity has been piqued by "PMF", so i'll head to your other video about it. cheers!

@thelwood 2 жыл бұрын

Thank you!!

@Seafariireland 8 ай бұрын

Excellent build project!

@WoodRanger138 2 жыл бұрын

Extraordinary Build, Bravo!

@thelwood 2 жыл бұрын

Thank you!

@johnchan6191 2 жыл бұрын

Wow, very clever 2 use insulation board as outer shell. Provide insulation during cold & hot months. Thx 4 sharing on Utube.

@thelwood 2 жыл бұрын

Thank you so much 🙂

@htmmotoring 2 жыл бұрын

Watching you guys using the proyector to make your stencil blow my mind

@thelwood 2 жыл бұрын

That was definitely an "if there is a will, there is a way"moment

@htmmotoring 2 жыл бұрын

@@thelwood just brilliant!! That was my like and suscribe moment keep It Up!! 🤘🤘

@thelwood 2 жыл бұрын

@@htmmotoring thank you!!

@rich2154 Жыл бұрын

I really enjoyed these build videos. It's been awhile since you have put these videos out so I'm not sure you will see this comment but if you do have you considered putting out a regular speed version of this time lapse version? If not I would be more than happy to pay you for a copy of it. I'm going to build one for my motorcycle and it would be a great help to watch it in regular speed. Thanks for your consideration. Again great job!

@abelardolomeli3045 2 жыл бұрын

Que Maravilloso Proyecto!👍🏼👍🏼👍🏼👍🏼🛵🛵🛵NUNCA DEJEN DE SOŃAR!🙏🏼🙋🏻‍♂️

@thelwood 2 жыл бұрын

Thank you so much!

@philrazzi7782 7 ай бұрын

Awesome video. Fun to watch the process. Look up the Hurricaine Hinge and replace that piano hinge asap.

@jodydorsett8726 2 жыл бұрын

Stunning! Real genius. 🙂

@thelwood 2 жыл бұрын

Thank you!

@us-carsrobwo795 2 жыл бұрын

Awsome Mate, What a such cool Project. Congratulations and a lot of fun

@thelwood 2 жыл бұрын

Thank you!

@NoSenatorson 9 ай бұрын

This build would probably be in a movie called Smart & Smarter.

@lookoutleo 2 жыл бұрын

what a great design and build, looks light and strong. only things i would change for use in in scotland , wouldnt have a kitchen at the rear, that would be sealed at the top, access would be storage from the sleep area in the camper and it would be quite a bit narrower with the wheels on the outside. love the build quality its very special. what kind material do you use, is it polycotton and what is the sealer?

@estebansepulveda7718 Жыл бұрын

Quedo espectacular, felicitaciones. 👏👏👍 Saludos desde Chile

@thelwood Жыл бұрын

Thank you!

@mayakay1175 Жыл бұрын

Excelente proyecto muy práctico y funcional.. Felicitaciones amigos!

@thelwood Жыл бұрын

Thank you!

@chriscattelino8169 Жыл бұрын

The retro style of these reminds me of the fins that golden age superheroes always had on their headgear, then I thought THAT would be the perfect place to hide a camera.

@paulmitchell1099 Жыл бұрын

Looks exactly like my old Vespa from 1964.

@sandym4317 2 жыл бұрын

Great Build!! Congrats!!

@thelwood 2 жыл бұрын

Thank you!

@alanzafra5555 2 жыл бұрын

So beautiful job

@thelwood 2 жыл бұрын

Thank you!

@harbinjerj4985 2 жыл бұрын

This is my dream right here. God, what i would give for this.....

@thelwood 2 жыл бұрын

Thank you! I hope you get your dream one day!

@evaportes6784 Жыл бұрын

Very nice use for camping

@thelwood Жыл бұрын

Thank you!

@user-vq8oj5lm1t 2 жыл бұрын

Дорогой Брат, проделанная вами работа просто колосальная!!!! Трейлер Шикарный, просто бомба!!! Здорово!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

@thelwood 2 жыл бұрын

Thank you!

@user-vq8oj5lm1t 2 жыл бұрын

@@thelwood Брат, не тяжеловато ли моторолеру и не нужен ли более мощьный байк? А так удачи в новых проэктах!!!😎😉🙂☺😀😄🙄💪👌👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

@thelwood 2 жыл бұрын

@@user-vq8oj5lm1t it is very light! Only 170 lbs! The bike has no problem pulling it out stopping it. The only issue is that since it is so big but also light is it is hard to handle in big wind gusts. 🙂

@ronaldharris6569 Жыл бұрын

Very cool project still can't believe that early Vespa can actually pull it......on flat ground 😀

@thelwood Жыл бұрын

Thank you! It handles hills well too! Wind is the biggest challenge

@micheleaday3902 Жыл бұрын

This Is Beautiful And Impressive

@thelwood Жыл бұрын

Thank you!

@necmiturker 2 жыл бұрын

Ellerinize sağlık çok güzel olmuş.nasil yatak konulduğunu gösterseydiniz.başarilar

@wanea3760 2 жыл бұрын

Creative especially using iron

@thelwood 2 жыл бұрын

Thank you!

@shootback5477 2 жыл бұрын

wow, you guys move fast!

@thelwood 2 жыл бұрын

🤣🤣🤣 I wish I had fast forward mode in real life!

@ridhadababi5858 2 жыл бұрын

Good job. Thanks for sharing.

@thelwood 2 жыл бұрын

Thank you!

@robertvitrano3757 9 ай бұрын

What a cool project 😎😎😎😎 You did a great job 👍👍👍💯

@thelwood 9 ай бұрын

Thank you!

@tigerboy211 2 жыл бұрын

very impressive~! great work!

@thelwood 2 жыл бұрын

Thank you! It was fun!

@adv_rider 2 жыл бұрын

Just amazing!

@thelwood 2 жыл бұрын

Thank you!

@felixcat9318 2 жыл бұрын

What an absolute gem of a video this is, meticulously precise attention to detail and truly outstanding craftspersonship throughout! Your tiny travel cabin is aesthetically beautiful, unique and practical, and it perfectly recreates the style of the classic tear drop trailers. I imagine that people may believe it to be a beautifully restored original, rather that a perfectly crafted new construction. This is the most perfect PMF application that I've ever seen, its absolutely immaculate! Wherever the eye rests, beautiful fit, finish and detail shine through, its art you can camp in! I find your tiny travel cabin to be elegantly simple and simply elegant!

@thelwood 2 жыл бұрын

Thank you so much! It was such a fun and challenging build!

@badawesome Жыл бұрын

Nice choice of music. I am going to try and build a truck cap using your technique because of its light weight.

@thelwood Жыл бұрын

Thank you!

@johnlewan1114 Жыл бұрын

Cool project. If you have a short attention span like me, watch at 2x speed. Got a few ideas for something I'm working on. Thanks for posting.

@thelwood Жыл бұрын

Thank you!

@jungyun7519 2 жыл бұрын

소박하지만 멋있다

@AtasakNantasomboon 2 жыл бұрын

สวยงาม awesome 😍

@thelwood 2 жыл бұрын

Thank you!

@lilivicordero8077 2 жыл бұрын

So beautiful

@thelwood 2 жыл бұрын

Thank you!

@tork62077 2 жыл бұрын

Pretty dang sweet!!

@thelwood 2 жыл бұрын

Thank you!!

@AnthonyDibiaseIdeas Жыл бұрын

Well done. Thank you.

@thelwood Жыл бұрын

Thanks!

@aulupinar 2 жыл бұрын

Excellent job 👏👏👏

@thelwood 2 жыл бұрын

Thank you!

@jlucasound 2 жыл бұрын

Awesome, Lucy!!

@thelwood 2 жыл бұрын

Thank you!

@user-bt5no7sm9f 2 жыл бұрын

Отличная работа!

@thelwood 2 жыл бұрын

Thank you!

@dantejones4551 2 жыл бұрын

Awesome build! I'm wondering about the rigidity of the 1" foam with PMF especially after the kerfing. I have a project in mind and I think this technique may work.

@thelwood 2 жыл бұрын

I know I responded on the other video, but I figured I would respond here too in case any one else is curious too 😃 The sides without the kerfing are very strong. For the roof it definitely needed the wooden dowels as spars to help strengthen it. If it were going to have to withstand snow on the roof, I would also put 1/8 baltic birch over the top. Here in Arizona that isn't an issue. The sides were cnc cut before I had input on the design of them, the area by the door was very thin... only an inch of foam above the door! So there wasn't room for wooden dowels there. To strengthen that part I actually put 1/2" x 1/16" aluminum bar right into the kerfs on each side of vent using exopy. That added a lot of strength!

@dantejones4551 2 жыл бұрын

@@thelwood Thank you for answering twice! Has someone asked about the total time it took to complete this build? I'm trying to get a rough (realistic) estimate on my project. It normally takes twice as long as the time I've allotted!🤣

@thelwood 2 жыл бұрын

@@dantejones4551 we worked on this for 2 months, weekends and some evenings. My full pull behind my car teardrop took about 6 months total. I know all about things taking twice as long as I expect!

@ClassicCarTraveler 2 жыл бұрын

Love it !!

@thelwood 2 жыл бұрын

Thank you!

@Taiguzhenren Жыл бұрын

Amazing jobs. This is the exact tiny trailer I am looking for. Thanks so much!!! How much does it cost for materials only?

@johnzee691 2 жыл бұрын

very impressive!

@thelwood 2 жыл бұрын

Thank you!

@0hypnotoad0 Жыл бұрын

Its very interesting that "PMF" is something that was forgotten about, canvas-skinned airplanes and boats used to be fairly common a century ago. The technique was neglected and forgotten, but it's such an effective way of building lightweight structures.

@thelwood Жыл бұрын

Yes! I love the technique and the look :)

@guillermomiguel8835 Жыл бұрын

Jenial diseño y excelente idea👍muy útil y Transportable 👍

@thelwood Жыл бұрын

Thank you!

@glennbarthelemy2443 2 жыл бұрын

Well done guys👍👍👍👍

@thelwood 2 жыл бұрын

Thank you!

@Ethio24News. 2 жыл бұрын

Great video ✌️

@thelwood 2 жыл бұрын

Thank you!

@altaloma7789 Жыл бұрын

Well done! I've been looking at building a foamie but weight buildup keeps me from going that way. Still, it looks enticing. I'd love to hear how you came out on weight. When I build trailers at your size they usually come out somewhere around 90 pounds. My lightest is 61, but it's built to the minimum size possible. Yours looks much easier to live with. It's hard to change clothes in a minimum size trailer.

@thelwood Жыл бұрын

Thank you! We ended up at 170 lbs