Micro-speed control for Scanreco RC400 radio remote controls
Рет қаралды 6,653
2 жыл бұрынDo you need to adjust the speed of the functions on your Scanreco radio remote control? In this video, we show you all the features of the Micro-speed function, that can be enabled thank to the "turtle/hare" switch on your RC400 G2B/G3 transmitter.
Learn more about our radio remotes at: www.fabercom.it/en/radio-cabl...
Subscribe to our channel: / @fabercomsrl
@zenitmoskovskiytv3899 Жыл бұрын
We have rc400 installed on HEILA crane. Suddenly crane speed stuck on 20% and not returning back to 100%. Speed became very low and not possible to use different directions at same time. In manual mode (crane chair) all working properly. Central unit screen shows 1H. Rc400 diagnostic shows joystick range from 18 to 28. Please give advice if possible.
@FABERCOMsrl Жыл бұрын
Hi! Most likely, the system is now working in WMB mode. To receive support and restore "crane mode" with normal speeds, please feel free to contact our service manager at ivan.campanini(at)scanreco.com Please also include in the e-mail the type and serial number of both receiver and transmitter. Many thanks!
@user-tt4ms2by1n 8 ай бұрын
Boa tarde como faço pra comprar um co trole desses
@FABERCOMsrl 8 ай бұрын
Bom dia! Para receber todas as informações sobre nossos produtos e nossa rede, por favor entre em contato conosco em info.it@scanreco.com
Scanreco System Solutions - ScanrecoFaber
Рет қаралды 1,6 М.
Scanreco System Solutions - ScanrecoFaber
Рет қаралды 4,5 М.
PALFINGER Service
Рет қаралды 11 М.
BLUE DECK ELECTRONICS
Рет қаралды 192
Scanreco System Solutions - ScanrecoFaber
Рет қаралды 3,7 М.
Brother-live_mob
Рет қаралды 923 М.
Immersed
Рет қаралды 112 МЛН
EG Axternal
Рет қаралды 1,6 МЛН
KOMPUKTER
Рет қаралды 349 М.