Mig Welder Wire Stuck In Liner

Рет қаралды 98,552

3 жыл бұрын

Mig Welder Wire Stuck In Liner are you having mig welder liner problems ? mig welder liner replacement is very easy to do and is quite cost affective but sometimes in the middle of your welding you get your wire stuck in the liner. Checkout my video and I will show you how easy it is to unjam your binzel liner. But most of the time I just buy a new one as its cheap and can make a huge difference to your MiG welding outcomes. Also once you damage your liner its almost impossible to get your wire flowing through it with out jam-up's or snags. You can damage it as easy as running over it or bending in a tight loop also the longer your mig welding torch liner the more issues you will find with your wire. The shorter the better.
Check Out More Cool Stuff : petes-tools.com
Binzel liner, mig welder liner replacement : • Video
Adjusting your drive roll tension : • adjusting your drive r...
PRO Liner : amzn.to/32R6WWP

Пікірлер: 127

@tickletaguchi4211 3 жыл бұрын

Thank you! I am brand new to welding and thought I messed my welder up pretty good. Found your video and it was a super easy fix. Going to have to check out more of your videos.

@petestools 3 жыл бұрын

Glad it helped!

@KatAdair Жыл бұрын

Pete, thank you so much! I’m a girl with a new MIG welder, and I had so much fun the first day I ran through an entire 2 pound roll of wire. But when I went to change out the wire, the wire was stuck. I thought I’d royally screwed up. This was such an easy fix, and I thank you so much for putting this video out! Super understandable, super chick friendly… I appreciate you so much.

@petestools 5 ай бұрын

Wow very cool .Sorry i am so late with reply .I have been working on another channel about new Zealand

@ProudMary53 3 жыл бұрын

Great stuff as usual Pete. One other thing I've found that can jam your wire also is if the wire gets a light coating of rust on it. I live in a high humidity area and the wire can get a light coating of rust on it when it sits for some period of time. To overcome this I use a special lubricated felt wire cleaner that clamps onto the wire where it comes off the reel. Works a treat.

@petestools 3 жыл бұрын

Thanks for the info! cheers pete

@dptreesculptures7080 3 жыл бұрын

Thanks Buddy. Got welding wire stuck both ends bust both ends leaving very little to grab with pliers. Followed your instructions and as you guys say "no worries " Thanks very much, all the best from David in the UK.

@petestools 3 жыл бұрын

Nice work! cheers David NO WORRIES MATE LOL

@jasonherring2419 3 жыл бұрын

Thanks Pete! That worked like a charm - I thought the thing was corroded or something much worse. Bob is indeed your wombat!

@petestools 3 жыл бұрын

cool mate cheers

@williampablo 2 жыл бұрын

Thank you, you saved my job, I'm new to welding and I had no idea what to do.

@petestools 2 жыл бұрын

Glad I could help

@petestools 5 ай бұрын

Show your support for my channel by treating me to a coffee! www.buymeacoffee.com/petestools

@blsemetan7232 3 жыл бұрын

Hey thanks, your video helped me out. I had no ideal how to get that wire out till now! : )

@petestools 3 жыл бұрын

You are welcome!

@javierramirez6136 3 жыл бұрын

Thanks the video really help me out got my Miller up & working again

@petestools 3 жыл бұрын

Glad I could help

@miamcginley7597 2 ай бұрын

This actually helped a lot mate thanks

@Jivingturkeysmasher 2 жыл бұрын

The best tutorial ever. Ty my Miller was very stuck.

@petestools 2 жыл бұрын

Glad it helped!

@NDyHa 3 жыл бұрын

Perfect guiding video - exactly what I needed today, Yay!

@petestools 3 жыл бұрын

So glad!

@johnmacmillan627 Жыл бұрын

Thanks Pete, just what I was looking for!

@samlewis4520 21 күн бұрын

Thank you very much for the video!

@ethanlafleur3749 2 жыл бұрын

Thank you so much for the great video Pete, you just saved me🙏🏻

@petestools 2 жыл бұрын

Thanks mate

@junefundano4187 3 ай бұрын

It's a big help for us new users.

@paulhowlings7111 3 жыл бұрын

Love the videos Pete Very informative

@petestools 3 жыл бұрын

Glad you like them!

@garrettgiuffre7298 2 жыл бұрын

That's peet for help me with my wire kink. The wife was trying for the longest time to unlink my wire and boom peet does it just like that. Life saver

@petestools 2 жыл бұрын

LOL Cool have great day

@DougKoper 4 күн бұрын

Thanks mate, helpful.

@jakesemrad9787 Жыл бұрын

You are the only person I could find that addressed this issue

@petestools Жыл бұрын

thanks mate

@aaryanpanwar6405 2 жыл бұрын

Thank you man i am new in welding it will help me in future

@petestools 2 жыл бұрын

Best of luck

@realsheasmith 3 ай бұрын

This video saved our day!

@flyingocelot5440 4 ай бұрын

Thank you

@Gunsgame1966 2 жыл бұрын

I was just about to give up ! And just use my stick welder less problematic ! But thanks for this video I’ll tackle it tomorrow lost hours this afternoon with this stuck wire grrrrrr

@petestools 2 жыл бұрын

LOL hope you sort it

@sagardhanwal5936 2 жыл бұрын

Thanks for advice sir .so good

@petestools 2 жыл бұрын

So nice of you

@fatheron841 3 жыл бұрын

This helped us lot.. thank you dear

@petestools 3 жыл бұрын

Glad it helped

@sblv2035 2 жыл бұрын

Great video thank you for sharing

@petestools 2 жыл бұрын

Thanks for watching

@TheAntipedy 3 жыл бұрын

Thanks mate - Good explanation.

@petestools 3 жыл бұрын

No problem 👍

@TheTeban1968 2 жыл бұрын

thank you so much. this video helped me today!

@petestools 2 жыл бұрын

You're so welcome!

@alamhijaualvin3672 2 жыл бұрын

Important class 👍💪 thank you

@petestools 2 жыл бұрын

Thanks

@pawerRanjerah 2 ай бұрын

Thank you sir

@DirtyApronBoy 11 ай бұрын

huge help, cheers

@petestools 5 ай бұрын

welcome

@brentsmith5647 Жыл бұрын

Brilliant video thank u 😎😀💡👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@petestools Жыл бұрын

Glad you enjoyed it

@Nigenavigator Жыл бұрын

Helped me today thank you!

@petestools Жыл бұрын

You're welcome!

@dontmindme333 2 жыл бұрын

Thank you for this!

@petestools 2 жыл бұрын

Hi jack, your welcome

@Padadventure Жыл бұрын

Saved my day! Thanks!

@petestools 5 ай бұрын

welcome

@watsoncali25 2 жыл бұрын

Thanks, that was helpful

@petestools 2 жыл бұрын

Great thanks

@brentsmith5647 Жыл бұрын

Fantastic video thank you❤️👍😎

@petestools Жыл бұрын

Thanks for the visit

@lxsmith2 8 ай бұрын

thanks pete!

@petestools 5 ай бұрын

welcome

@johnzupancic6631 Жыл бұрын

Thanks mate. Good on ya!

@petestools Жыл бұрын

CHEERS

@KatAdair Жыл бұрын

Thanks!

@petestools 5 ай бұрын

thanks

@mariomendoza6298 2 жыл бұрын

Thanks mate

@petestools 2 жыл бұрын

Happy to help

@danjeln 2 жыл бұрын

Thanks

@petestools 2 жыл бұрын

Thanks for watching

@alfredpoitras6017 Жыл бұрын

awsome man thanks now i know how toi fix mine if it happens and what line my wier comes out cus my little plastic hose is brock and has to be i air line hose not the feeder hose

@petestools Жыл бұрын

Did it work?

@nat15.9 Ай бұрын

For such a small welder (160A-200A), Can we replace the torch line from originally like 3m to 5-8m without an issue on motor feed power or poor arcing?

@marksokolski5125 3 жыл бұрын

Thanks man

@petestools 2 жыл бұрын

Any time

@popoolamatthew9707 Жыл бұрын

Please can it be used for stainless steel pipe

@nznative77 Жыл бұрын

Thanks for the tips Pete! You’re a wild man! Yee haa!! Where u from bro?

@petestools Жыл бұрын

I am! LOL .CHRISTCHURCH MATE

@huntinginaust.6463 3 жыл бұрын

Handy as 👍

@petestools 3 жыл бұрын

cheers mate

@ralphhowes 2 жыл бұрын

Great video, the "Yee-Hahs" mess with my tinnitus badly.

@petestools 2 жыл бұрын

cool mate , sometimes a bit loud lol

@waymanedge5246 3 жыл бұрын

Saved my ass dude thanks

@petestools 3 жыл бұрын

lol, very welcome mate

@MotoKingWOT Жыл бұрын

If you are getting wire stuck in the gun there is a bigger problem going on Pete. First off you probably need a new linner because it has probably been neglected, secondly you need to use wire lube they sell sponges that go in your welder by the spool. Also you need to use contact tip gel. With all that being said I have NEVER had a mig welder birdsnest with steel and I weld with it every day. Preventative maintenance, YEEEHAA!!

@petestools Жыл бұрын

Nice

@wolflahti412 Ай бұрын

There is no wire stuck in the liner, but I cannot get the wire to go through. It somehow became blocked while sitting on the shelf with nothing in it.

@FixNewsPlease 2 жыл бұрын

In short, straighten out the whip and pull on the wire until it comes out. I don't see all that disassembly really doing much. Appreciate seeing that it will pull out though and that it's likely a kink. I was wondering how it would get stuck.

@FixNewsPlease 2 жыл бұрын

Just came back from the garage. Straightened the whip, snipped between the roller and the liner, went to the trigger end and pulled firm and steady and it slid right out! And you were right, a kink about half way through. Thanks again!

@petestools 2 жыл бұрын

No worries mate

@dustinowens1360 3 жыл бұрын

Hey i have flux 125 welder from harbor freight and i used the wire that came with it and it worked fine my welds were good but i let it sit for about a week and i think the wire rusted inside and it got stuck pretty well and i yanked it out and got better wire but now it feeds out all wild and makes my welds look horrible do you think i ruined the hose liner ?

@petestools 3 жыл бұрын

are you sure your wire tension is correct

@Rias-Gremory-a-gamer Жыл бұрын

what do you do if you have 2 lines inside it and both are snapped off at bother ends?

@petestools Жыл бұрын

2 lines?

@kennethfannin8707 Жыл бұрын

very helpful .. ill try it but i bet i screw something up .. thanks

@petestools Жыл бұрын

LOL SOUNDS LIKE ME MATE

@bobeden5027 Жыл бұрын

where do you get new liners from?

@petestools Жыл бұрын

amazon

@user-dv4eu5zd1y 2 күн бұрын

Yes Haw

@salimbinsulaiman2723 2 жыл бұрын

Thanks Pete for a great video. But do tell me what would you do with that salvaged piece of MIG wire. It's too short to be used for the MIG but such a waste to be discarded?!

@petestools 2 жыл бұрын

yea to short to use

@donleypinggah5149 2 жыл бұрын

My mig weld gun just bloked right on the tip of the nozzle..I removed the nozzle .but how can I clean it to reuse again?

@petestools 2 жыл бұрын

That can be a real pain mate .You might have to replace it.

@kennethfannin8707 Жыл бұрын

im having the same problem ,,, i was going to junk my mig welder .....or try and find that whole piece .

@petestools Жыл бұрын

did you fix it ?

@kennethfannin8707 Жыл бұрын

@@petestools yes ..new part works great for now

@georgeanderson3754 2 жыл бұрын

What if wire is broken at both ends and none is sticking out to grab?

@petestools 2 жыл бұрын

Pull your gun to pieces you will find the end some ware.

@thepattern8236 Жыл бұрын

What did you say "Right pain in the bum pete" something?

@petestools 5 ай бұрын

yea its a pain in the bum

@samtimo3002 2 жыл бұрын

I bought a welder today Read the manual It tells me to lay the gun and liner out flat to feed the wire, but the problem is i domt think i tensioned it properly So it just ended up getting to a point in the line and just stops, like i dont know what is going on you can feel it getting to the gun and then just stopping then i went a little too far and fucked it I went to pull it though the roll side and only about 10cm came out... so what then its not sticking out either side of the welder just get a new liner

@petestools 2 жыл бұрын

nice

@michaelcronan990 2 жыл бұрын

Try to keep the cable straight and don't step on it or drop any thing on it I have never had wire stuck in the liner I have had a lot stuck in the tip especially 23 wire.

@petestools 2 жыл бұрын

good tips thanks