How To Stamp A Concrete Walkway | Ashlar Slate Stamped Concrete

Рет қаралды 30,737

Күн бұрын

#stampedconcrete #concretewalkway #mikedayconcrete
How to stamp a concrete walkway with ashlar slate stamps. In this video I'm showing you how I form, pour, and stamp concrete. Pouring and stamping concrete is what we do best. If you want to learn how to stamp concrete, you can check out my stamped concrete course below. This concrete walkway was colored with dark grey concrete color and we used a charcoal release powder. The ashlar slate stamps are from Marshalltown.com, there's a link below to their site to find all their tools and a coupon code also.
For more information about stamped concrete, visit my website:
www.everything-about-concrete...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
SPECIAL DEAL: Use Coupon Code EAC on all equipment and tools bought from Marshalltown's website and get 10% off the price plus FREE SHIPPING!!
MARSHALLTOWN POWER TROWELS:
marshalltown.com/power-trowels
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
marshalltown.com/concrete-sho...
MARSHALLTOWN CONCRETE TOOLS:
marshalltown.com/concrete
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Пікірлер: 60

@treymann497 Жыл бұрын

I just did my first stamp job 2 weeks ago I wish I would have found your channel before I did but we did a pretty good job but now because of you I’m gonna be much better next time thank you

@MikeDayConcrete Жыл бұрын

Awesome! You learn a lot each time you do it.

@tomruth9487 4 жыл бұрын

To be honest, I'm not a big fan of stamped concrete in general, but you guys really know how to do a great job and it makes the difference to me. The color especially looks very natural.

@MikeDayConcrete 4 жыл бұрын

Thank you Tom!

@julianahaddad227 4 жыл бұрын

your explanation is spot on. really enjoyed watching. love what you do.

@MikeDayConcrete 4 жыл бұрын

Thanks Juliana!!

@snazzyusername 4 жыл бұрын

Bet that guy painting dislikes that dust...great information mike! You have helped me a lot.

@MikeDayConcrete 4 жыл бұрын

He didn't give us any complaints. Haha

@peggypatton9170 4 жыл бұрын

That's Wright we all have to start somewhere this year will be my first time in my life to do concrete on my own I'm 40 been doing concrete block work since I was 13 I know alot from over years time for me to branch off give it my all for 2020.

@MikeDayConcrete 4 жыл бұрын

Good luck, let me know if I can help in any way.

@joet.4756 4 жыл бұрын

Great information, Thanks! The painter looked thrilled when the release agent went down, lol

@MikeDayConcrete 4 жыл бұрын

Yea, he was all excited about it!!

@ep9360 Жыл бұрын

Good work. I noticed the Painter couldn't take his eyes off you guyz, stamping. Didn't really count on those views eh. Lol. Thank you sir, contemplating doing this exact thing at my home. I'm in Texas, and will begin this project in probably June. Yehaw.

@MikeDayConcrete Жыл бұрын

Thanks, hope it goes well!

@augustreil 4 жыл бұрын

Beautiful job.

@MikeDayConcrete 4 жыл бұрын

Thank You!

@lowfrequencyfilms 4 жыл бұрын

The lords of the stamp dance 🕺🕺

@MikeDayConcrete 4 жыл бұрын

That's about the only good dance we're good at.

@patsman6737 3 жыл бұрын

Watched you do a stamped concrete patio and now doing the walkway. You are definitely a PRO. Your products are beautiful. I'm in the process of building a home. What would a concrete walkway like this cost? Also, cost for a a 18x14 patio, Thanks!

@mad-maxx2211 3 жыл бұрын

Hello.Great videos. Did this load come with color already in it?

@dmorrison66 3 жыл бұрын

Mike is there a specific size slump you use for stamping rather than a standard pour and finish?

@Cdrivethp 3 жыл бұрын

Is it possible to stamp existing unfinished concrete and or is it cheaper than building from scratch?

@cameronoverfield8764 4 жыл бұрын

Those painters were amazed

@MikeDayConcrete 4 жыл бұрын

They'd never seen stamping done before.

@simonflores3971 4 жыл бұрын

what colors are those?

@jameskramer5311 2 жыл бұрын

if doing a project 45'x15'x6" thick in 90* weather how long would you wait before stamping???

@psidvicious 4 жыл бұрын

-I’m sure you know this already but - When you’re putting on the outside form, instead of measuring the width with a tape every time, I always found it easier to cut a 2x4 the width of the sidewalk and use it as a gauge. Especially if you’re working by yourself. Then you can use that piece to close out the form at the end. -For the mix you’re using there - pea-rock, with fiber mesh and some MRWR, that sounds like about the same price as we’re paying in So. Fla. -Was it just the camera angle or was that a heavier gauge wire mesh? It looked like maybe a W2.1 instead of the standard W1.4. 🤜🤛

@MikeDayConcrete 4 жыл бұрын

We use the 2x4 method for width size also. Just didn't on this one. It was a heavier gauge wire. Owner wanted it.

@MikeLtm32 4 жыл бұрын

Great idea with stamped concrete, not used in Poland at all, I think. Good information from the video. Thanks. ;)

@MikeDayConcrete 4 жыл бұрын

Maybe you could be the first to start in Poland.

@MikeLtm32 4 жыл бұрын

@@MikeDayConcrete Should think about it. Thank you. Greetings. ;)

@alexsami1569 3 жыл бұрын

From where you bay that stamps

@alexsami1569 3 жыл бұрын

How long have to wait until put the stamps please

@viking8781 2 жыл бұрын

I uave a brick patio that i am going to replace with concrete because every year weeds keep growing in between the bricks. Tgese videos are helping me to prepare. Question: if i stamp it, can i use a grinder and put the relief cuts only in the stamp lines or do they have to go straight all the way across

@MikeDayConcrete 2 жыл бұрын

They have to go straight.

@tomruth9487 4 жыл бұрын

Just wondering about what is your loading of fibermesh? Is there a point where too much fibermesh gets in the way of troweling? And are you also using a water reducer?

@MikeDayConcrete 4 жыл бұрын

We use one bag of micro-fiber per yard of concrete. That's a good ratio. We always use the water reducer in the mix.

@billmiller7138 4 жыл бұрын

We used to call it floating when the floats were wood. I guess I still do, but I use a Mag float.

@MikeDayConcrete 4 жыл бұрын

Thanks!

@adolfoyalonso2955 2 жыл бұрын

why the foam under the form ?

@cameronoverfield8764 4 жыл бұрын

Dumb question but what do you use for your radius from is it masonit?

@MikeDayConcrete 4 жыл бұрын

It's called Azek in Home depot. It's pvc board.

@MultiTravelingman 4 жыл бұрын

Could you use the same method for a driveway?

@MikeDayConcrete 4 жыл бұрын

Yes, for sure.

@cameronoverfield8764 4 жыл бұрын

Thanks it looks better than Masonite

@MikeDayConcrete 4 жыл бұрын

Thanks Cameron!

@phantom2226 3 жыл бұрын

Why the styrofoam underneath the concrete -- Will the foam rotten over the years?

@MikeDayConcrete 3 жыл бұрын

No foam doesn't rot. It protects the ground from freezing and possibly heaving.

@italianstallion4958 4 жыл бұрын

Why don't you use walk behind edgers my back is hurting watching you guys edge this. Couldn't imagine edging a mile of sidewalk that way

@jamesrogers4674 3 жыл бұрын

Omg. Concrete was about $75 a yard last time I poured.

@cesar68033 4 жыл бұрын

Wish I could do this at my house but the price is to high right now for me

@psidvicious 4 жыл бұрын

Yea, that stuff is pricey in my area too. I guess that’s why Mike says there’s some good money to be made with it. 🤜🤛

@MikeDayConcrete 4 жыл бұрын

It is pricey. There's a lot of training and experience in this skill. It does look really nice though. I have a lot of customers who had pavers first, didn't like them for many reasons, and we came in and replaced with stamped concrete.

@cesar68033 4 жыл бұрын

I’ve been quoted 11k to remove old pavers and replace with stamp concrete for 60ft x4

@ccvovoom 3 жыл бұрын

@@cesar68033 Those pavers would stay! Lol!

@jacobcarey8282 2 жыл бұрын

5k-6k would be more reasonable and leave a good profit still…. But what do i know i live in Denver which has a very high cost of living…