You can see by the comments how much your video is appreciated. I'd just like to add that your editing and especially syncing audio/video is superb. I know that's not so easy, even though you make it look so. As a retired person I have time on my hands and I own a manual Top-Tech geared head DM45 milling machine and am considering heading down the CNC pathway. With help from people like you I think I will go ahead. Subscribed. Thank you.
@ludwigchristiankaempffer7932 Жыл бұрын
98888888777777y87y776fy6c6yy6yy6y6yyyy6yy6yyyyy6x6666yyy666trr6r65this erlaubt xģgvğfvvģ ğgrrrtrrtrttrrtrtrrrtttrtr grrrrtfttf rttfttr is rttfttr und hat sich and the the rttfttr rttfttr rgrgtgggrggrrgfrrggrrrrfffrfgrrrrrrrr is the rgg2a😢,😂
@KyleofAsgard Жыл бұрын
You started your cnc conversion yet mate? If not, this is your sign that its about that time ;)
@braddavis43774 жыл бұрын
Excellent video! Well written, well demonstrated, you left little to nothing unexplained. Keep up the good work!!
@aarondcmedia95855 жыл бұрын
Stunning narration and video tutorial for a CNC conversion. Well done, and thank you.
@cncelements19875 жыл бұрын
You are very welcome Aaron.
@shirothehero06095 жыл бұрын
Bravo my good man. Excellent bit of kit and clear tutorial. Stoked to see how she cuts.
@ActiveAtom5 жыл бұрын
Nice to see, we did a 4 axis CNC build off of a TAIG and it runs well but we love tool changers because changing to tools in the holders after each program cycle per tool is well tough, we are spoiled. Lance & Patrick.
@rohitsuryawanshi87975 жыл бұрын
Hi I am Rohit suryawanshi from India great work sir
@arafatali13275 жыл бұрын
I will be very glad to be ur student. Great workmanship.
@johnwayne21035 жыл бұрын
This is how an assembly video should be made.
@markhall34349 ай бұрын
Glad I found you.. Doing a PM30 here using the Procut ballscrew kit. A few videos out there, yours is very digestable w/o a lot of excess commentary. Thanks!
@vigisbigtm5 жыл бұрын
You make everything look so easy. Great work!
@Festivejelly Жыл бұрын
I hope to do something similar for my milling machine. Very nice straight forward steps here. I know mine wont be exactly the same as yours but its good for a guide.
@rico198920043 жыл бұрын
I guess need to install some dempher for Z-axis to compensate weight milling machine head, something like gas-lift, on the video during Z-axis moving down the ball-shaft did few rotations after motor stopped.
@johnkordas45594 жыл бұрын
Hi Joseph are the files still available? Site seems to be down/offline. Great video, you make the process look easy.
@joeking433Ай бұрын
Yeah, that kind of sucks, doesn't it! I guess he's moved on and doesn't want to commit to this.
@Th3mast3r69 Жыл бұрын
Awesome video bud. Thanks!
@KPS0 Жыл бұрын
Hi Thanks for sharing your work, the video is fantastic, informative and concise. The video is titled part 2, I can't find the first video, has it now been removed from KZfaq? I'm investigating a conversion on a Warco WM14 mill so keen to follow your process to adjust for the Warco.
@ahmadbaghereslami7964 жыл бұрын
A very clear and informative tutorial, thank you
@IvanJakesevic Жыл бұрын
Great video
@alexon20104 жыл бұрын
very cool your video ... put more!
@CarlPugh2 жыл бұрын
Great video! Where is part one?
@jrsydvl72184 жыл бұрын
You should have milled flats on the ballscrew before you dismantled the mill. That way you could use a backup wrench to tighten the jam but.
@Coopdeville0611 ай бұрын
I’m hoping to kinda mimic this with my cheap wen mini mill
@chandermohanthakur59995 жыл бұрын
nice video for cnc enthusiasts.
@berendlucasvanderweide5 жыл бұрын
Inspiring work!! Neat conversion!
@DiscoverRajivVlogs5 жыл бұрын
Again another coincidence I found your comment🤣😂😂🤣. 2nd time randomly.
@berendlucasvanderweide5 жыл бұрын
@@DiscoverRajivVlogs lol!!!. Sounds we are tricked by the same interests and suggestions of KZfaq. Nice to see you here too!
@DiscoverRajivVlogs5 жыл бұрын
@@berendlucasvanderweide Yep, I got you second time.lol.
@brianweston46715 жыл бұрын
Where is part 1? Went to your channel and only one other video, that’s not part 1. Would love to see the first video as well as a new video showing the conversion in action. Regardless, Well done.
@ferreiramotos44164 жыл бұрын
Nós dó canal ferreira motos estamos acompanhando tudo, 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👍👍👍👍👍👍
@user-tc2ky6fg2o5 жыл бұрын
It's a very nice conversion.
@glennlopez67724 жыл бұрын
Thanks! Excellent!
@claudelussier16785 жыл бұрын
Vraiment très bien fait!
@basemkhoja44984 жыл бұрын
Very very good 👍👍👍
@can5projects5634 жыл бұрын
awesome video great info.
@dimehbonics99745 жыл бұрын
Awesome video!! 👍🏻👍🏻
@okomi5 жыл бұрын
Wow seen something I have never seen in youtube, thats new. Thank you.
@PY2JV4 жыл бұрын
Parabéns !!! que legal
@antonioolivares95204 жыл бұрын
the paaaain @2:04 :P btw nice job
@makosharkcnc77305 жыл бұрын
great video
@robertmillen29675 жыл бұрын
1st class instructional video - thumps up and subscription
@cncelements19875 жыл бұрын
Thanks for the kind words Robert.
@saltysoulcreations85375 жыл бұрын
very cool
@saltysoulcreations85375 жыл бұрын
nice job and am going to go search for the video on your electronic (hope it exist)
@urgamecshk5 жыл бұрын
I don't see parts 1 or 3?
@iheart3dprinting9515 жыл бұрын
Did he die and we don’t know?
@DiscoverRajivVlogs5 жыл бұрын
Nope, single video is whole series. Title is wrong,or maybe he decided to split the videos but he didn't.
@Z-add5 жыл бұрын
Instead of doing the conversion, is it possible to just buy spare parts of PM machine that are required and build/buy the update. That route would be cheapest.
@kermitfrog18974 жыл бұрын
If this is part 2, then where is part 1?
@biyaglaki25234 жыл бұрын
Kermit Frog part one is when he bought the the milking machine
@jjsemperfi Жыл бұрын
@@biyaglaki2523 I love CNC Milking Machines
@ronin21676 ай бұрын
Can't access the website with the conversion.
@weldingbilgin2 жыл бұрын
Kolay gelsin 🇹🇷🤝
@pieterbotes89384 жыл бұрын
Very neat work brother but I think your bearings are way too loose (5:37). You need some press fit, just enough to tap bearings in.
@JaakkoF Жыл бұрын
Those bearings are not seeing any lateral forces, so no need to have a press fit. Sure it would be by-the-book, but doesn't affect the end result here.
@mokuroglucnc5 жыл бұрын
my name is Joseph great video thanks Joseph
@flyingmonkey3822 Жыл бұрын
Why does the lead screw need to be replaced? To get rid of backlash?
@EngineeringNibbles5 ай бұрын
Yes
@paulmanhart448111 ай бұрын
This is great. You make it look easy. Do you sell these kits? What PM mill do you use? Thanks, Paul
@sto27798 ай бұрын
The link to buy the kit seems to not work. I get "403 Forbidden".
@joeking433Ай бұрын
I'm not allowed to go to your website. Is it still in service?
@thomaskallmyr5 жыл бұрын
SPECIAL PRODUCTION
@GiltronTheOne3 жыл бұрын
The link to the files is Forbidden 404
@albertovique23 Жыл бұрын
Nice… the parts that you build for this project (mount brackets for example) are made in aluminum??? Regards
@joaquinnunez334 жыл бұрын
Hello, where can I watch the part 1 of this video?
@mpix002 жыл бұрын
I have a question. I currently have an X2 Cnc conversion mill with Nema 23 motors using a 1/4" shaft. Can I switch my motors over the the PM 25mv cnc conversion , but I would just need to get the 1/4" coupler ends to fit onto my Motor shafts correct? I believe the Ball nut screws have a 3/8" for XY and 1/2" for z, but COuldn't I just get the coupled end for the motors to fit the motors shaft correct?
@dirtboy896 Жыл бұрын
Where do I get that jog handle?
@abrahamdong48974 жыл бұрын
How confirm the alignment of lead screw position when consider the tough connection? thanks.
@AustNRail3 жыл бұрын
Will you be posting a build job using this new CNC?
@RaptorMachineToolCo2 жыл бұрын
Website doesn’t work….
@DR.ELEKTRIK5 жыл бұрын
That's what I'm talking about!
@phamtrung40595 жыл бұрын
Máy phay mi ni 👍🏆👏👏👏👏❤️
@eddietowers55955 жыл бұрын
MORE! MORE! MORE!
@jrcowboy10994 жыл бұрын
What's the point of using angular contact bearings for the X axis ballscrew if you only have one side? This means the motor's bearings are supporting the other side, which is one of the main reasons bearings are used in the first place.
@JaakkoF Жыл бұрын
Removes axial play from the screw. Doing both ends would overdefine the assembly and lead to problems with thermal expansion.
@helloworld-ge3sq5 жыл бұрын
great video, great explanation, thanks so much where is part 1.
@fabiodibenedetto532 жыл бұрын
Where is part 1? Right
@ThisDesignedThat5 жыл бұрын
do you machine these kits yourself?
@kotnapromke4 жыл бұрын
Подшипники не те! Нужно радиально-упорные, а не эти. И все детали из стали, а не дюраль. Иначе будет низкая прочность. И не вижу системы смазки швп и направляющих. Без смазки чпу фрезер долго не проживет. А где концевые датчики на ось x и y? На z концевик недоразумение. Умрет быстро. Нужен индукционный, а не такой.
@adamxsquared5 жыл бұрын
Won't the love joy coupling add backlash error?
@eformance5 жыл бұрын
Generally not, as long as you use high durometer urethane spiders. Fadal uses these style of couplers successfully. The couplers do wear out over time and need to be replaced. The alternative is to use a bellows style coupler, they are made of metal.
@omblauman4 жыл бұрын
I own exactly the same manual milling machine, I am looking for advice on how to motorize the x axis. May I use the same hardware? Should I use the same hardware, considering that I don't need the reproducibility of a CNC machine? Thanks
@michaellindgreen31292 жыл бұрын
Do you have any kits or plans available for purchase?
@takisbakalis2 жыл бұрын
You are gonna have excessive backlash on Z and Y, but you already know that
@jonaslinchangco8245 жыл бұрын
I'm kinda curious here, Why change the existing screw with a new lead screw?
@911dddd9115 жыл бұрын
manual mills come stock with ACME threaded lead screws, instead of the ball screws that he installed. ACME is fine for manual machines, but has too much backlash for a CNC machine. Ball screws eliminate most of backlash by using ball bearings to interface between the lead screw and the ball nut, www.barnesballscrew.com/images/1.jpg which is attached to the slide/head/saddle.
@jonaslinchangco8245 жыл бұрын
@@911dddd911 thanks for the info bro
@reneestrada11483 жыл бұрын
How much it's the total cost for this conversion??
3 жыл бұрын
What stepper motors are you using in this project?
@wibisonog3 жыл бұрын
Nice conversion. How you made a kit? By cnc or manual?
@TheMIroslaVbachev4 жыл бұрын
This is not how you preload bearings. With this bearing configuration you need precisely machined distancer between inner races of both bearings. Problem is How you will measure the exact distance between the inner races when they are all ready mounted.
@JaakkoF Жыл бұрын
Sure you can do it this way, but it isn't the perfect solution. As for measuring the inner distance, there is no need to measure the inner distance if you know how much preload you want on the bearings, as you can look it from the bearing preload chart or measure the needed gap if data is not available.
@QuadriviumPCE4 жыл бұрын
Which steppers are you using?
@lordRW5 жыл бұрын
wouldn't it be both cheaper and easyer to use the pre-existing lead screws?
@dejanbrice87745 жыл бұрын
No because they are not ball screws, they will have too much backlash. The ball screws effectively have negligible amounts due to them running in circular channels which you can actually on the better ones pre-load to tighten the nut up against the screw.
@Yoshimonky5 жыл бұрын
se ve de huevos!
@MrRoyalFreak5 жыл бұрын
at 330 shouldnt you be using a thrust bearing ?
@eformance5 жыл бұрын
Angular contact ball bearings are designed to take both axial and radial thrust loads, so a separate thrust bearing is not required.
@joelsantiagovalentin22316 жыл бұрын
Amazing. Do you sell the entire kit? Or just the ball bearing and plate?
@cncelements19876 жыл бұрын
Thanks Joel. I sell the entire conversion kit except the stepper motors and controller. This kit requires two NEMA23 stepper motors (X and Y axis) and one NEMA34 stepper motor (Z axis). You can learn more about this kit at www.cncelements.com .
@joelsantiagovalentin22316 жыл бұрын
@@cncelements1987 do you have the link for nema23 and 34 since they all have different oz force which I not good at picking correct stepper.
@ADBBuild6 жыл бұрын
I would buy the highest torque one you can afford. AutomationTechnologiesInc.com has lots of options at great prices (no affiliation). They also sell motor drivers and everything else you might need.
@ponydown4186 жыл бұрын
Very cool are your kits using single or double ball screws? Are you located in the United States? Where is part 1 of the video?
@cncelements19875 жыл бұрын
This kit uses single ballnuts. These kits ship from Florida. Part 1 should be coming soon.
@My0010010010013 жыл бұрын
👌👏🙌
@iheart3dprinting9515 жыл бұрын
Are you still in business ?
@joeygonzo4 жыл бұрын
check their links. they are still up
@Mirandorl5 жыл бұрын
Would this kit be compatible with the Warco Wm18?
@john24785 жыл бұрын
Very interested in your question, i have just bought a WM18 which is the PM 727 equivalent. I am currently planning cnc conversion. I have the steppers and most of the electronics. I failed to find any help with CNC conversions except at huge cost so will use my old X2 cnc mill to machine the parts. John
@Mirandorl5 жыл бұрын
@@john2478 Hi John, out of interest why CNC the mill if you already have the X2? Also did you see the Model Engineer magazine WM18 conversion? Its only an overview and gives little detail on how to do it or costs, but its a nice approach, even features a second high speed spindle. One approach I have seen is to buy a second table and machine away the necessary clearance for the ballscrew housing, that way you dont invalidate your warranty and you can use the manual mill to make the mods. Thats what I would have to do as I do not have second mill sadly. It does seem to be an expensive process no matter what.
@john24785 жыл бұрын
My X2 conversion was sucessful and has been in regular use for. 10 years. However I wanted a more substantial machine with a stiffer column to take deeper cuts. If you want to share ideas you can pm me on my channel after subscribing. I like many of Josephs ideas and will incorporate them. John
@albertobaboun10445 жыл бұрын
hi , why you did not use a bearing in the motor side of the x axis?
@takisbakalis5 жыл бұрын
Since there is a pair or opposite angular contact bearing in the left side the ballscrew can't move, so it seems it's not needed in the right side. Same when you use BF12 mounting blocks, on side is only for alignment. The motor does exactly that. Neat design I would say
@Paul-ok5dw5 жыл бұрын
Joseph can you answer your email please. Not sure if you seen it or not. Thanks
@cncelements19875 жыл бұрын
Paul, thanks for the email. All the best with your conversion.
@norahung5884 жыл бұрын
Would you have any interest to buy high quality ball screw nut or shaft from Taiwan or China? How may I help you? Any complain from your customer and lack of good supplier to offer ball screw nut or shaft? How may I help you? A ball screw is the kind of high-tech product that requires capital-intensive, technology-intensive as well as management-intensive input. Wei Tai owns some of the most advanced manufacturing and inspection instruments, which are used to maintain high standards. Wei Tai recommends the use of standard ball screws for most designs, but We can also produce high-lead and miniature versions. Balls crews are also manufactured according to customer specifications. This is Nora from Taipei Taiwan and we are ball screw manufacturer. We own the high quality and competitive price because our factory in China. Our goal is we really hope to do more business with you. We have established from 2010, the head design office in Taiwan and in house manufacture in China. Professional in ball screw and screw nuts, especially for hi-precision requirement. Provides quality, economical and compatible ball screws solution. Our ball screws own the good quality, competitive price and hope to find a power transmission dealer world -wide. If you have any interest, please feel free to contact with us. We supply ball screw and screw nuts in DIN 69051, GB/T17587, and JIS C5 standard with in-house manufacturing factory. Shen-Han Technology is established in 2010 and supplies ball screw and ball nuts which factory is sited in Bao- An, Shenzhen, China. We are the high-tech ball screw manufacturer and meet the international standard of DIN 69051, GB/T17587 and JIS C5, etc. The factory is certified by ISO9001 & UKAS and we are professional in the industry and have the confidence to produce both of the global standard and the customized specification, and the quality is compatible with the international branded products. We are approved by Chinese high-tech enterprise certification and the plant own the equipment included CNC lathes, CNC 4 axis machining centers, CNC 5 axis machining centers, and CNC internal thread grinding machines. We have R&D team to develop the new designs of ball screw and has the specific patents including the new design and new appearance. We are also capable to develop OEM or ODM designed ball screws to satisfy with customized needs. The sketch of CAD/CAM customized transmission component design is available both for equipment and high lead ball screws in specific standards. Capabilities of Shen-Han Technology - . Ball screws and screw nuts in customized specific standards . High lead ball screws and screw nuts (1204, 1210, 1220 ,1606 1616, 1632, 2505, 2550, 2440, 2020, 2040, 2525, 4040 5050 etc.) 0601 0606 0801 0802 082.5 0808 0810 etc. Only our factory has produced in China. Wei Tai Transmission Limited Company is the head office in Taipei and acts for all of international trade activities to handle the shipment supplied from Shen-Han Shenzhen factory. We are looking for the new customers in your regions and it’s thankful if you can give us a chance to work together with. Please feel free to contact the following: Wei Tai Transmission Limited Company Email: 02weitai.ltd@gmail.com We chat ID: w0978377508 You tube: kzfaq.info/get/bejne/Y56bdbl-mbCncps.html kzfaq.info/get/bejne/oLeHZZZz3Zudh4U.html Website: www.weitaitw.com/en/ball-screw-nut.html www.weitaitransmission.com FB: facebook.com/hung.nora.3 Cell phone: +886978377508 Address: No. 214-3, Zhou Mei Street, Bei Tou District, Taipei, Taiwan, R.O.C. Tel# 886-2-28326773 FAX:886-2-28327852
@gertkristensen6451 Жыл бұрын
hobby cnc okay but this sound of stepper motor arrrrrrrrrrrrrrrrrrrrrrrrrrr
@AndrewAHayes5 жыл бұрын
there is no such thing as a flathead screwdriver it is a slotted driver!
@steinarlarsen98992 жыл бұрын
this is a scammer, be aware
@rek35223 жыл бұрын
Your spindle bearings are a joke! That's not how it is done!