WE are repair a frost damaged foundation that is suffering from frost induced spalling
High Performance Cement FastSet™ All-Crete™ is a dual purpose product. As a fluid grout meeting ASTM C 1107, it is used for the anchoring and grouting of anchor bolts, equipment, retrofitted reinforced steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. High Performance Cement FastSet™ All-Crete™ characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C 928 R 3.
20 - 45 minute set time
Can be mixed to a plastic, flowable, or fluid consistency
1/4” to 24” (.635 cm to 61 cm) application thickness
Use to make partial depth or full depth repairs to roads, bridges, industrial floors, and other concrete surfaces.
Concrete repair applications:Highways, Bridge Decks, Grouting, Floor leveling, Industrial Floors, Anchoring.
High Performance Cement FastSet™ Repair Mortar is a polymer modified shrinkage compensated, rapid setting, high strength mortar specifically formulated to make structural repairs in vertical and overhead applications. It exceeds requirements of ASTM C928 R2 for structural concrete repair.
Vertical & overhead applications
Structural repair
20 - 40 minute set time
Can be sculpted to match the contour of existing concrete surfaces
Feather edge to 12 in (300 mm) application thickness
High Performance Cement FastSet™ Repair Mortar obtains high bond strength without the use of bonding adhesives or acrylic additives. After initial set, the materials may be trimmed and shaped to match the existing contours of the patch area.
For patches deeper than 2 in (50 mm), High Performance Cement FastSet™ Repair Mortar may be extended with 27.5 lb (12.4 kg) of high quality minus 1/2 in (minus 13 mm) aggregate per 55 lb (24.9 kg) bag.
High Performance Cement FastSet™ Repair Mortar is also available with an integral corrosion inhibitor.
Coverage
A 55 lb (24.9 kg) bag of High Performance Cement FastSet™ Repair Mortar yields approximately 0.50 cu ft (14 L). 0.50 cu ft (14.2 L).
Edited by YouCut:app.youcut.net...