Upgraded from an older 18v kit. kzfaq.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

As a plumber working in new construction residential projects and high rise projects the m18 brushed drill and impact driver both work perfectly in a 8 to 10 hour work period.

Just got this 2850-20 kit (with the 2.0, charger, and bag) sealed for 80$ shipped. It's my first brushless as I'm coming from the one+ Ryobi platform. The difference in sound is interesting. Not only quieter but a little more electric sounding (if that makes any sense at all). Kind of like the first time you drive/hear a rotary engine after driving piston engines your whole life.

Thanks for the upload, I own the brushed version and now I know what a beast it is.

Funny, I ran across this video and I actually have both of these drivers. They are so similar in speed, torque and power that I don't favor one over the other. However, I am leery of brushless tools as all of the extra electronics are a huge failure point and their longevity is questionable to doubtful. I still have two Milwaukee drills and a deck screw gun from 1995 when I started my business and I doubt any brushless or even any tool with mosfets and circuit boards will last half as long.

is anyone going to talk about the lack of an extension? I feel it gives a better grip to the screw. Anyone else agree or disagree?

I have the brushed driver and use it on everything including car suspension part with no problems.

I had never thought of that technique for testing torque on the drivers! I'm gonna try it out with my 7 year old brushed impact driver vs a new brushless one tomorrow.

I just bought these brushed drills I don’t work in trade or nothing just for essential uses at home are these any good and will they last ?

Like the presentation. Subscribed.

I want to know where to buy that socket wrench you used to tighten the bolts on the rim i love that thing

Thanks so much! Exactly what I was looking for.

Nice review I'm going to pick this up after returning the DeWalt 809 driver

Great comparison!

Thank you. This was helpful with my shopping choice :)

I had the brushed version. Now I have the fuel brushless version. It’s miles better

I think I have the same brushless and it takes off 150/FT LB lugnuts from my truck no issues.

I can't trust someone who pulls up when they are doing anything with lugnuts lol.

Thank you ...Excellent video

Great vid bro

Why do they even produce brushed motors still?

I have the brushless combo kit paid $220 for it with the 2 year warranty and 2 a.h batteries

Bigger battery more power for using these drills as he is using. My advice do your research before purchase also consider voltage platforms example 12volts, 18volts, 20volts, 60volts etc. Happy researching

Hey, Can you send where you have found your 1/2 adaptor ?

thanks for the info

And what's the difference between those two?🤔

Thank you, I've been looking around to see if there were any videos of these little impact drivers in combo kits being used to remove lug nuts on cars. Also need a driver for small projects around the house and shop. Big ups

I never realized that the small bits could be put directly in an impact driver, I thought they would go in too far and get stuck. I guess I should have looked at how far in the locking adapters go in.

Most people with these tools have trucks to give you heads up so go higher voltage impact driver

would there b any performance difference if the 2656 (non brushless) if it had a 3.0 battery? Or does that just help the battery life?

Can I use the the same battery for both?

Merci pour cette vidéo, je sais laquelle je vais devoir acheter maintenant.

Fantastic video def worth subscribing to, this was super informative, is there a chance you could use them to tighten a bolt on something and then use the torque meter to see how well they actually secured the bolt or nut?

Good video. Answer some questions for me

He really put tiny 1 inch bits in the collets lmao

I also just got the m12 fuel kit just like that but on m12 platform, I was gonna get a matco drill and impact driver but this time the Milwaukee was cheaper I got some discounts ended paying 250$ for the kit and an extra 2.0 battery.

Tire lugs are different from truck lugs consider this also when purchase this tools

That impact on not the “fuel version?” It’s just a “brushless” right?

There’s a big difference from the Fuel brushless to the non fuel.

I have the single speed brushless model and there is play where the metal housing mounts in the plastic frame. Is that normal?

Whats the point of having Brushless and the Fuel Brushless when the price difference is neglectable? And the Fuel Brushless tools are vastly superior.

What torque wrench and meter is that

all good except for the back ground music

I just got my 2851-20 today and the light on my brushed impact is better... little disappointing but I don’t work in the dark too often so I can deal with it ool

Brushless are the best

Should of tried lug nuts before you torqued them when they were tight

The screw test was just bad positioning. I did the test with both brush and hex. Both screwed and and pulled out at the same time lol.

Not gonna lie this is a good video, I'm surprised Milwaukee hasn't bought it off you to put on their website lol.