Thanks so much for this video. This works so good am impressed how much better it is 8 plus hours on full heat and it still not dead would recommend this to anybody

Thank You.

Bravo~ insane masterpiece, TTested-

Jump starter batteries work as well. Most have the same 12V out 5.5mm jack as well as USB ports.

Good Solution if you don’t have Milwaukee m18 Batteries,But if you do,you can get the Milwaukee Power Source Adapter and use the m18 batteries.

I found adapters from Aliexpress to type C or type A , for the exterior cable of the jacket insert, but I do not know whether or not there is a risk of them burning the cable

Can you do this with a dewalt battery and adapter for dewalt to 9v ?

Thanks bug dawg

So I got the adapter and paired it up to an anker 40k power bank as I couldn’t get hold of a 30k one. Now I have the same cable you have it shipped from the us to uk. However I have an issue the pads heat up and work fine then it randomly shuts off. I don’t know why I don’t think it’s the cable but can not be sure. It’s frustrating to say the least I intend to go fishing at night at the bottom of some cliffs and this needs to be working a 100% any ideas what’s wrong cheers

Hi great video, do you know what type of female plug and size is used on the adaptor ?

I converted mine to a 2s 7.4v 4000mah lipo battery works great

@ Tested Reviews: I'm looking to do the same with battery. Question, I thought QC3.0 battery pack adjusts the voltage 5v 9v 12v on it's own, smart charging. So why the need for the step up adapter?. You can buy USB TO Female DC adapter with no step up . Do you think in would work or should I just buy the adapter you are using?. Thanks in advance!

I use the M18 5AmpH battery with their power source adapter. $25 works great!

I have this battery and if I have the vest on Hi the battery shuts off every couple minutes. On medium it stays on. What a pain

So technically, the adapter requests my powerbank 5v 3amp the adapter turns it into 12v 1amp( according to the sticker in the adapter)does that mean my power bank is wasting power? Will the hoodie take longer to heat up?

Will this wear out the jackets circuitry faster, or is it fine with that?

Hey, can we get an update on if this hack is still working for you? Thanks

I have this exact same setup on my M12 hoodie and it turns off after an hour of use on high. I’ve tried 2 different step-up adapter and 4 different battery packs with the same result. Any ideas?

So it's been a year. How is it going to the power bank and your heated jacket?

Good vid need link 4 adapter 🙏🤔

How many amps and watts can this jacket hold beforee melting ?

Can we charge a heated Jackets from normal mobile power Bank??

This video is 3 weeks old now. Can I get. A update on how it’s holding. Cause man these m12 batteries are trash and this is exactly what I’ve been looking for

Does it fit in the pocket with no problem

I bought a ninja power bank on Amazon. It's 3.0 for ports should work right ? 20000 mah battery. Also I just grabbed a cheap cable like that one you showed on Amazon hoping it will work lol

I just bought everything you posted to mod my jacket. How is this mod working after a year?

hi sir is it teleclast 30000mah out1: 5v/1.0A (max) out2: 5v/2.1A (max) out1+out2: 5v/2.1A compatible?

So your power bank is 111wh, the m12 2.0 would be 22.2wh and 3.0 would he 33.3wh and the bigger m12 6.0 would be 66.6wh. Theres also an efficiency loss when stepping voltage up or down. So this pack may last 3x the time of a 2.0 and almost doubke a 6.0 m12, its not nearly the 30:2 ratio or 15x you mentioned

No way u will get 18h