MILWAUKEE M12 Soldering Iron - It's HOT but is it TOO HOT?

No video

MILWAUKEE M12 Soldering Iron - It's HOT but is it TOO HOT?

Рет қаралды 22,794

Күн бұрын

A battery-powered soldering iron sounds like a good idea. Our homemade efforts failed to impress the eFIXX viewers, so they suggested we check out the Milwaukee M12 Soldering Iron.
Looks heavy but what does it feel like when trying to solder LED strip?
=================================
More soldering from eFIXX
- Gary's soldering efforts - • Gary Hayers (GSH Elect...
- TS100 soldering iron review - • Is the TS100 the best ...
- SolderM8 - • Soldering to LED strip...
- Soldering Tips from Penn Elcom - • LED STRIP LIGHTING PRO...
== AD ============================
Products featured
Milwaukee M12 Battery Powered Soldering Iron
hub.efixx.co.uk/milwaukee-sold...
==================================
================================
🕐 TIME STAMPS 🕕
00:00 Soldering time with the Milwaukee M12 SI
00:27 Is it better than our TS100?
01:00 Uses Milwaukee M12 battery system
01:13 Lighter than it looks with adjustable head
02:20 Tinning wires using the angled head
04:07 Soldering LED Strip (led tape)
06:49 Using the third-hand jig
08:00 Changing the tip
09:00 Heat uptime
11:30 What do we think?
================================
================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. Watching our videos, you'll discover new products, explore new applications and find answers to your technical questions. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. hub.efixx.co.uk/youtube-subscr... ================================
📺 NEW TO THE EFIXX CHANNEL Watch our essential videos playlist hub.efixx.co.uk/essentials
📺 CATCH UP ON THE LATEST VIDEOS hub.efixx.co.uk/latest
📺 ELECTRICIANS' TOOL REVIEW hub.efixx.co.uk/tools ================================
🔴 eFIXX LIVE Join us for our youtube live stream twice a month - features product sneak peeks, challenges, giveaways and live electrical banter. NEXT STREAM HERE 👉hub.efixx.co.uk/next-live-stream Catch up on previous episodes 👉hub.efixx.co.uk/livestream
================================
🆕 FREE CPD Learn about new applications, regulations and best practice with our FREE CPD modules. - New modules released every month covering everything from surge protection to lighting hub.efixx.co.uk/CPD
================================
📝 APPRENTICE HUB If you're an electrical apprentice, retraining as an electrician or looking to refresh your knowledge, then please check out our apprentice hub. It contains thousands of multiple-choice questions to help prepare for electrical installation exams. hub.efixx.co.uk/apprentice
================================
📩 eFIXX NEWSLETTER Sign up to find out about our live events, competitions and product giveaways. www.efixx.co.uk/sign-up
================================
FOLLOW US on your favourite social networks for behind the scenes action, breaking news and competitions.
🟠 INSTAGRAM hub.efixx.co.uk/Instagram
🔵 LINKEDIN hub.efixx.co.uk/linkedin
🟣 FACEBOOK hub.efixx.co.uk/facebook
🟡TWITTER hub.efixx.co.uk/twitter
==================================
❌ This content on this channel is for electrical professionals.
❌ ==================================
📹 Presented by
Gary Hayers - Editor eFIXX
Gordon Routledge CEng MIET - Technology Editor eFIXX ===================================
#efixx #electricians #milwaukeetools

Пікірлер: 41

@alecturner2008 2 жыл бұрын

I love mine, it spends most of its time sat on a 4 or 6 ah battery. Never had the iron run a battery down yet and I've used it for some heavy joints on umbilical cables. Not sure if the stand is really up to the task, maybe use some back to back unistrut to increase the strength. Lol.

@blahh397 2 жыл бұрын

Great video guys and thanks for setting it up. Liking the 'third hand' stand too. I doubt though that you would be using something this costly in the workshop, pre-soldering your LED strips. However, I can see its usefulness on site. Of course, you can always use it as an extra torch to look for the Wiha slimBit that you dropped...

@parmindersagoo2891 2 жыл бұрын

Better with fine tip rather than chisel one. Used to soldering as was a tv engineer for 30 years. Once tinned just need heat and no more solder, neater joints, my led joints are neat

@keithroberts5946 2 жыл бұрын

Taught to solder for electronics many years ago - if I had melted or deformed the end of the insulation on the wire it would have failed quality control. Was also taught to tin a lot longer lenght of wire and take the excess solder to the end and then cut it to the length required. Should be able to see individual strands of wire covered in solder.

@Dog-whisperer7494 2 жыл бұрын

Nice bit of kit if you do a lot of soldering . But over priced for some thing you might use once in a wile . I will stick to my mains powers one . Great video guy’s as always 👍❤️⚡️

@mygiftmatters 2 жыл бұрын

NOTE: After a lot of research on the M12 solder iron, buyer beware: Anything over 3ah CP batteries and ~10 min of run time will start to deteriorate and melt the housing cap of the solder wand. There are literally hundreds of 1 star reviews claiming this issue, rendering this device useless after only a few months of use. That said, I am still buying one, but limiting my usage to ~10 min on before cooldown and only using compact batteries. One guy I found did this consistently and was able to put hundreds of hours of use on this device over the course of several years. God bless!

@alexstone691 2 жыл бұрын

I don't know from a electrician perspective but IMO ts100 with a good power bank would be best, and the power bank can be also used to charge the headlight and stuff

@efixx 2 жыл бұрын

👍

@fester. 2 жыл бұрын

love mine and use it every day, no more plugging in for me again, run it on a 2ah and works spot on

@efixx 2 жыл бұрын

What do you use it for?

@fester. 2 жыл бұрын

@@efixx building led strips for student housing,never had any issues at all

@tnutz569 Жыл бұрын

There is a thermal fuse with a cutoff of 152°c. If you're an owner who uses it quite a bit and it suddenly won't heat anymore, its most likely that fuse right below and inline with the heating element. Order a new thermal fuse, take the iron apart and replace the fuse (Don’t heat that fuse too much when you solder it on). This tool is very handy, but it gets pretty hot using the 3 or 4 amp hour batteries getting that fuse to cut-off. Stick with the small battery and you should be good. Hope that helps some owners.

@pcb1962 11 ай бұрын

The thermal fuse blows even with the small batteries, this tool seems to have a 100% failure rate

@tnutz569 11 ай бұрын

@pcb1962 I'm finding the failure rate of the m12 rotary tool is about the same. This would be my second time replacing the schottky diode and voltage regulator (replaced both last time). Time of use before failure is about 1-2hours of total use on that rotary tool.

@KnugenMooMoo 2 жыл бұрын

Mine only last about a hr give or take, but definitely handy the quick heat up and being cordless is 👌, plus its got a torch built in who doesn't love a gadget with a built in torch

@efixx 2 жыл бұрын

Everything has a torch 🔦

@KnugenMooMoo 2 жыл бұрын

@@efixx that's it what doesn't,

@APSuk2 2 жыл бұрын

I know you are using solder with a flux core but a little no clean flux dabbed on the bare pads & on the end of the wires before hand will help that solder flow no end. I buy leaded solder which melts at a far lower temp than lead free so I only need to heat my iron up to 280C. Trust me flux is your friend if you want perfect solder joins.

@johncoombs3128 2 жыл бұрын

Can’t beat a gas soldering iron with a see through gas tank and far better adjustment IMO

@robertburrows6612 2 жыл бұрын

Agreed. Good thing about a gas soldering iron, refill and go no waiting to recharge batteries , plus mine doubles up as a heat gun , for heat shrink

@guffermeister 2 жыл бұрын

The problem with an over temerature iron is that it burns the flux up too quickly and you end up with crappy joints that don't flow - sort of in the way you experienced. Even worse with the lead free crap. If you are doing more agricultural work this won't matter but for components that are temperature sensitive it will as you've discovered you'll cook 'em

@draventannoy 2 жыл бұрын

Have one fot years, does work good and has nice feel to it. Looks bulky but has a really good feel. The only minor thing is that you cant set the temp. to your own choice.

@efixx 2 жыл бұрын

Temp settings would be a great feature

@brianhewitt8618 2 жыл бұрын

@@efixx a digital one and a red warning light somewhere on it for when it's above a certain temperature, knock that over without realising and the curtains might be gone!

@pn8902 2 жыл бұрын

Disadvantage for this kind of iron that uses the fixed heater and interchangeable tips, there isn’t a good thermal connection between the white heater and the tip itself so you do lose a lot of the potential maximum power output, the ts100 has the heater built into the removable tip and so the heat control and heat up time is far better. This is why the ts100 produced a better joint, upon touching the tip to the very large copper traces on the LED tape, it sucked a lot of heat from the tip but since the heater has a good thermal connection to the tip, a lot of the heat generated gets efficiently transferred to the tip rather than being lost because the heater is not touching the iron tip like in the Milwaukee’s case.

@efixx 2 жыл бұрын

Great input 👍

@nw5835 2 жыл бұрын

Has Gary got a new grip for handy cam.

@christastic100 2 жыл бұрын

Keep in with the black and all in with the red nothing in this game for a melted led

@efixx 2 жыл бұрын

We had a super time Jim 😂😂😂

@alexstone691 2 жыл бұрын

How is the availability of the tips?

@efixx 2 жыл бұрын

Seem to be various types available via Amazon

@The_Studioworkshop 2 жыл бұрын

Looks like a nice tool but looks a bit awkward to hold for any long periods of time, seems too thick! I’d be interested to know how hot it gets, and how fast Coming from an electrical engineer rather than an electrician, I tend to prefer something with more head options, and variable heat; but then again if you’re soldering some LED wire every now and again I’m sure it’ll be ok!

@efixx 2 жыл бұрын

400c within 18 seconds

@LeonCamero 2 жыл бұрын

You can change the solder tip and it's actually comfortable to hold (for me that is). Not a bad tool to have as a quick back up.

@J4MB0 2 жыл бұрын

Bit bulky I think

@iknowmyfootball3901 2 жыл бұрын

200k by the end of the year

@efixx 2 жыл бұрын

Thanks for the support 👍🏻

@rayc1503 2 жыл бұрын

It's one of the worst purchases I've regretted. It stopped working the 2nd time I used it. It was sent off during warranty and low and behold broke again. Avoid, Avoid, Avoid. I ended up selling it for spares or repairs on Ebay. There were numerous others also being sold for spares.

@efixx 2 жыл бұрын

We still prefer our TS100