Milwaukee M18 FUEL Drill & Impact Driver Combo ~ Review

No video

Milwaukee M18 FUEL Drill & Impact Driver Combo ~ Review

Рет қаралды 338,604

Күн бұрын

Today we review Milwaukee M18 Drill and Impact Driver Combo. This drill and impact kit comes with the tools, 2 5ah batteries, a charger for m18 and m12, and a carrying case. The impact tool was my most used tool as an automotive mechanic. Both tools have great power and brushless motors. Thanks to Home Depot for providing these tools.
2997-22 kit at Home Depot ~ bit.ly/2N2SxwD
Drill 2804-20 ~ bit.ly/2DwB68f
Impact 2853-20 ~ thd.co/2zvQldm
Bosch wood drill bits ~ bit.ly/2xE8gx8
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.co...
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic

Пікірлер: 613

@sabilce Жыл бұрын

Upgraded from an older 18v kit. kzfaq.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

@anthonytrujillo7971 5 жыл бұрын

I've owned an M18 impact and drill set for 2 years. As a service plumber these things have had a hard life. I've done countless fresh water and sewer re-pipes with them. The drill has seen thousands of 1 3/8" self feeding holes for water lines and 2 3/8" - 4" holes for drains. Half inch holes in the concrete when my rotary tools were down. I've used my impact for all of my metal drilling, wood screws, lag bolts, maintenance on my personal vehicles, maintenance on tank less/regular water heaters and sewage ejector pumps. These tools are a great investment and this particular set doesn't owe me a thing.

@aaroneby1472 5 жыл бұрын

humble fyi that last mode on the impact is for self tapping screws. slowly ramps up the speed so it doesnt walk on ya and the slows it way down to set the screw nicely and not over drive it. mainly useful when screwing down sheetmetal screws with the rubber gaskets on them

@daevid21 5 жыл бұрын

Aaron Eby thank you for the knowledge bro

@adamrios8212 2 жыл бұрын

I'm glad for your comment on slowing impact driver. I had trouble with Philips head?

@mrajj1261 2 жыл бұрын

@zshredclh10 5 жыл бұрын

I have this same kit at work and I LOVE IT! Use the Impact driver every day and also the drill most days. It is incredible and I highly recommend it!

@SethDaughters 5 жыл бұрын

As an electrician, all my power tools are Milwaukee. Hands down the best tools. By the way the fourth setting is for self tapping screws, works great.

@davesheppard8797 4 жыл бұрын

I got sucked into the Milwaukee hype bullshit and bought a load of M18 fuel gear. The gear is cheap shit, the triggers on all four of my tools often don't work and the torque claims are bollocks. I have gone back to Hilti and on head to head testing in my workshop they piss all over The Milwaukee's.

@deltasierra1774 2 жыл бұрын

The 4th setting is for self tapping screws and it will tighten all the way up to first impact so that you don’t strip your hole; it’s designed for putting up metal siding.

@sparkplug1018 5 жыл бұрын

Absolutely love my M18 impacts, the 1/4" is great for interior stuff and body work. The 3/8" is what gets the most use in my collection, working under the hood it has more then enough power to do just about anything I want it to, and can get the tool onto. Their 1/2" impact, while heavy, works wonderfully for getting lug nuts and crank bolts off. And so far haven't been able to kill them either, which is a major plus. Anyone looking to get into these tools, CPO outlets sells factory refurb's for a good price if you're into that, and of course Home Depot has them new as well. Keep an eye on HD around the holidays, as they have the batteries on sale a lot.

@RobertLeBlancPhoto 5 жыл бұрын

Thanks for the review. It’s clear you took a lot of time using the tools and I appreciate not only your thoroughness, but also your honesty. So many other reviewers tend to just seem like infomercials. It’s nice to see that your dedication is to us viewers, and not the manufacturers. A giveaway of these would be awesome, but no one could blame you for wanting to keep these. 😁

@Jpilgrim30 5 жыл бұрын

Milwaukee fuel line up is awesome. Got rid of my snap on cordless tools and replaced them with Milwaukee and am so glad I did. The 1/2 drive one key impact smokes anything snap on has by a long shot.

@vojnikjna30 5 жыл бұрын

I am a steel framer and picked up the Gen 3 kit and I have to say that its the absolute best impact driver ever made. Truely is most powerful and yet somehow so compact. Paid itself off many times already.

@joecool509 5 жыл бұрын

My milsuckie has lasted 8 years and built many things. Batteries still going strong. No complaints at all.

@chrismartell1619 5 жыл бұрын

As an auto enthusiast. And as someone who is starting as an apprentice in a trade, these would definitely be a blessing!

@300superMEXICANS 5 жыл бұрын

Ive always likes Milwaukee the electrical company i use to work for ditched all their dewalt power tools in favor of Milwaukee. Also when i was an apprentice i had the little m12 impact and absolutely loved that thing its fallen off 50ft lifts, been soaked in mud pits, used hard everyday, and also has been run over by a work van and still runs strong. 10/10 would buy Milwaukee again.

@mdbeeler 5 жыл бұрын

Man I could use those. Keep me from borrowing everyone else's tools.

@seansmythe7543 5 жыл бұрын

mdbeeler oof your the worst! The guy who always borrows everyone’s tools

@LinhTran-gf5yv 5 жыл бұрын

And not return them ...lol

@Dansk55 4 жыл бұрын

Definitely need to invest in tools bro. Borrowing sucks

@brennancooper6843 5 жыл бұрын

Milwaukee do make a pretty awesome electric tool. That high torque impact wrench they have is amazing! Thanks for an awesome review!

@user-dm3kd7ur5n 3 жыл бұрын

Share a good website, batterynice.com/, where you can buy power tool batteries and chargers with great performance. They have warehouses in the United States, Germany, the United Kingdom, and Australia, and they have complete brands (Dewalt, Makita, Ryobi, Milwaukee, Black & Decker, Porter Cable, Worx, Craftsman, Bosch, etc.) Free shipping and not expensive. If you just need to buy batteries, it’s worth checking out

@ClintL63 5 жыл бұрын

the little light is a GREAT Idea! but it illuminates everything else BUT the bit point!! you can see everything else around the bit, but where you are drilling!

@RanochVTX 5 жыл бұрын

Bro this is too true

@HumbleMechanic 5 жыл бұрын

Thanks for watching everyone! Let me know what other tools we should check out. :)

@neonlazer9177 5 жыл бұрын

M12 Stubby Impact for sure! I just got mine in yesterday.

@RobertLeBlancPhoto 5 жыл бұрын

HumbleMechanic I’m just a DIYer but... How about a video of some quirky items that you use that most folks didn’t think about? For example, I use one of my wife’s old yoga mats for things like laying on the vehicle floor when I have to work under a dash, laying on the driveway when I have to reach under a car, or laying over a fender so I don’t scratch the paint with my belt or something. I love my magnetic tool trays, but I’ve also used magnetic mats, because their cheap and much larger. Since I use reading glasses, I have the flip up kind, that double as safety glasses. Finally, someone gave me a baseball style cap that has built in LED lights and holy crap it’s awesome. No more holding a penlight in my teeth. Anyways. Just a thought.

@ThousandBlade 5 жыл бұрын

up vote one more on the m12 stuby impact and also the eletric wrench too

@sbcncsu 5 жыл бұрын

Charles, I'd like your take on the M18 4 1/2 inch angle grinder.

@claimdisputed4820 5 жыл бұрын

New line of Craftsman tools from Stanley

@Chriskikas 4 жыл бұрын

Looked all around to buy this exact set for a while now to get me started with contracting on smaller jobs :)

@rupi4211 5 жыл бұрын

Starting automotive school and these tools would be really useful.

@Toolaholic7 5 жыл бұрын

I have that kit,love it.Replaced my 18 volt Dewalt drill and impact driver I don't use anymore

@MiniMii64 5 жыл бұрын

milwaukee is my go to brand when it comes to battery powered tools. at work we have the largest impact driver milwaukee delivers, that thing is heavy AF but it removes any nut or bolt you point it at. we once had to remove a seized lugnut on our rear tractor wheel, it took 5-10 minutes to fully unscrew that nut and the battery was still half full when it finally got it off, RIP threads :')

@manhuerta19 5 жыл бұрын

I got this set plus a 1/2 inch impact driver for 400 at home depot it still feel like a really good deal to me. I love them

@jason-hh6lu 4 жыл бұрын

I bought the impact driver. I do a lot of exhibition work so constantly fixing screws in and out all day long. It’s a real workhorse for carpenters and first fix carpentry. The 5amp hour battery lasted for a couple days between charges as well. Nice informative video.

@mikejf4377 5 жыл бұрын

I did like that you showed it in real world use, not just reading specs.

@catnmouse 5 жыл бұрын

I have the M12 set and LOVE IT. When I’m drilling through thick tile, it does heat up but less than my old B&D 20v. Zero issues with the chuck. Super happy with both for work and home.

@firepalm130 5 жыл бұрын

Just starting off in the industry, I graduate from UTI in July next year; would really appreciate these!

@TheWolfturd 5 жыл бұрын

We use these tools at my job (industrial plumbing). Beat the crap out of them and they almost never miss a beat. Only ever experienced the drill over heating when drilling for most of the day with large hole saws (4" or 5") . Only experienced the Chuck seizing once as well.

@mayhew75 5 жыл бұрын

I own the fuel m18 1/2 impact.. it’s a beast! I went to torque down bolts I had installed on a piece of heavy machinery- and they were already at spec of 180nm..Milwaukee is always a good choice, but it’s the icing on the cake with this bad larry.

@Questchaun 5 жыл бұрын

I have Milwaukees 3/8 impact wrench 55lbft (awesomeness) and a m12 stubby 1/2 impwct driver. Love them they've paid for themselves over and over.

@SanchoSanto 5 жыл бұрын

I have this exact set that I use for projects around the house. I see that the impact driver may not be good for lug nuts but where else will it work well on? I would have liked for you to go into more detail of where this impact comes in handy around the auto shop.

@tobiaspedersen5117 5 жыл бұрын

i really like your videos, iam just a humble diy mechanic that doesen´t have ANY power tools, and this kit could be my answer to so many time consuming jobs. GREETINGS FROM SWEDEN !

@natesmodelreveiwsetc.9626 3 жыл бұрын

I bought my fist set of milwaukee fuel 2 months ago and they kick ass with the hammer drill and impact driver.

@gersonovalle9397 5 жыл бұрын

I love my milwaukee tools the best. And I just bought this drills set is perfect .

@pilotreyes13 5 жыл бұрын

I'm an aerospace engineering student and work in a full scale aircraft structural lab taking apart an F-35. These would make life so much easier! Tough tools for a tough plane!

@wesleyblanton2432 5 жыл бұрын

I've always been a Dewalt Guy. I have been thinking about trying out Milwaukee so Today I'm in the Big Orange Box store and they have these drills and a Sawzall along with the packout box on wheels with ( 2) 5.0ah batteries and the charger for $250.00 half off the price of $500.00. I couldn't resist the deal , so I bought it and came and watched this review. Thanks for the review.

@HumbleMechanic 5 жыл бұрын

I’m a fan for sure.

@alexsierra2724 5 жыл бұрын

Great Deal

@tech_319 5 жыл бұрын

I just started a program at my school and we need to supply tools for ourselves. This set would make life so much easier. Also, I use the Humble Mechanic pocket screwdriver from PetrolBox almost every day.

@fosn09 5 жыл бұрын

This wood be a perfect start to the Milwaukee tools I have wanted to get! It's so cool that he's giving these away!

@KaiserOnTheRadio 5 жыл бұрын

I'd love to win them. Keep up the good work. Thanks for giving the "at home mechanic" confidence.

@user-dm3kd7ur5n 3 жыл бұрын

@timm3r 5 жыл бұрын

I use these at work and can confirm they are great. It'd be nice to have a set for home as well.

@budgetreviews9577 4 жыл бұрын

Impressed by the amazing Review. I personally love using Milwaukee products. They are top-notch when it comes to portable tools.

@batterynice5280 3 жыл бұрын

Let me share with you a good website, batterynice.com/, where you can buy batteries for power tools with great performance. They have warehouses in the United States, Germany, the United Kingdom, and Australia. It is worth visiting

@eleazarrivera6880 5 жыл бұрын

Hey Charles I'm a long time subscriber 1st time Commenting commenting I also just started my 1st job at shop and I could really use a drill. Thanks keep up the great videos.

@giuliasprint67 5 жыл бұрын

Count me in!!! Nice review. I’m glad you are giving them away rather than keeping them. Feels a bit less “dirty” that way.

@joshmakeshift 5 жыл бұрын

i beat the crap out of my first M18 drill put up a nice fight for about 4 years before it let the smoke out... have the M18 brushless now seems pretty solid so far.

@bstraub95 5 жыл бұрын

Just started a job at a dealership and these would help loads!

@michaelblacktree 5 жыл бұрын

As a building maintenance technician, I also use the impact driver more than the drill. And heck yeah, I could use those tools! 👍

@chiefexecutive Жыл бұрын

Wife got me this for Xmas. I’m pretty excited.

@jaredc5163 5 жыл бұрын

Who doesn't like a free tool giveaway?!? Can never have enough quality tools

@andrewa2859 5 жыл бұрын

I actually just got the m18 600 ft lb 3/8th a few months ago and can happily say, it was worth every penny of its rediculous price tag!! If you haven't reviewed it yet you should!

@HumbleMechanic 5 жыл бұрын

I love the mid torque. It’s a little smaller and lighter. But still great power

@bobchipman9152 2 жыл бұрын

Great job on the comments for the tools ,like the feedbacks ,thanks ,take care

@victorr648 5 жыл бұрын

Humble, love your channel. My DeWalt drill is slipping and would love to switch to these drills!

@uscfroadie 5 жыл бұрын

Who wouldn't want this combo. Top notch kit.

@EdgyNumber1 5 жыл бұрын

Humble! I service and maintain my own cars have found the top end M18 Fuel 1/2 impact wrench the biggest and best tool investment I have ever made. I have a Vauxhall Tigra B (project car) and using that tool I was able to completely strip down the whole worn out front suspension and replace literally everything in about 1.5 hours. It made stripping out track control arms a breeze. This impact wrench is angry. It rips through some big old bolts with ease and frankly, saved a lot of time and some knuckle skin. Before that job I wasn't so sure spending over £400 on an impact wrench was a good idea but now it has given me the confidence to go out and buy classic cars and build some new projects. 3 Year warranty too... I really rate Milwakee's high-end hardcore stuff!

@ImJustMe555 5 жыл бұрын

Milwaukee tools are really good tools. I don't have any for personal use, but I do use them quite often at work.

@matthew3726 5 жыл бұрын

These drills are awesome its gotta be number 1 use on the when shit breaks

@michaeljacyno8368 5 жыл бұрын

Awesome review! For someone who has been around Audi's since 1999 and still does not have any air or impacts (yeah, what am I thinking?), this would be a great first addition in that category to my toolbox. I typically borrow air tools (have an air compressor) and have been reviewing electric impacts recently, so this review couldnt come at a better time. Pick me, pick me :)

@Blacky372 5 жыл бұрын

Great review overall! But torque as pound-feet instead of Nm and mass as ounces instead of kg really makes it hard to understand without using a calculator all the time. I would love to see you using metric units, at 03:50 you even used Nm as torque, but then continued with pound-feet. Besides that your video was very informative and concise, good job!

@52Ford 5 жыл бұрын

I agree with you on pick up the 2Ah batteries. The big battery packs are great if you're drilling a lot of large holes with a drill, but I really don't think they're necessary with a 1/4" impact. I know with my (non-Milwaukee) big cordless drill with a 1 1/2" paddle bit, I can kill a 2Ah battery in a few minutes and with my 3/8" cordless impact, the same battery lasts all day of regular use or a few hours of constant use.

@kennlawson6807 5 жыл бұрын

As a mechanic, I use the M12 1/4" ratchet and drill kit. This would be a great step up to have. I am a fan as well....of you and Milwaukee.

@Ladco77 5 жыл бұрын

Nice. I just got the M12 Fuel 3/8" impact. I may have to add this for larger jobs.

@chrislabar22 5 жыл бұрын

I will definitely have a use for these if I were to win. And it would be much appreciated. Keep up the content!

@MrCFH420 3 жыл бұрын

My tools were stolen from my truck. My company let me buy a new drill set. I bought these. They are very 👍🏻

@samwisegamgie8163 5 жыл бұрын

I would love to add them to my tool collection. They would come in handy.

@braddowns17 5 жыл бұрын

Oh hell yes I would love the set. My old Craftsman just don't cut it anymore.

@brotherbrian1 5 жыл бұрын

This would be a great set. I'm still doing everything by hand with my trusty Craftsman ratchet set I bought YEARS ago.

@awayhulala6778 5 жыл бұрын

Already have some tools(3/8 stubby impact wrench is on the way) in the m12 line. Would be very glad to have these in m18 line to expand my Milwaukee collection.

@williamreadon9052 5 жыл бұрын

i have been replacing all my snap-on electric tools with either mac/dewalt OR Milwaukee, they have much better battery life, are much better value for the money, much more durable and best of all i can run into the home center to grab a battery if i need one for much less than the snap-on ones

@HumbleMechanic 5 жыл бұрын

Yep. I didn’t buy in on the Snappy electric stuff. I always felt it was too expensive

@MPAutomotiveCrafts 3 жыл бұрын

Those tools take a lot of stress without any damage at all, I understand that is ideal not not max it everyday but it will deliver for most applications.

@HumbleMechanic 3 жыл бұрын

agree!!

@bunyaminmach6247 5 жыл бұрын

Great Review! Starting my first year Apprentice in automotive, would love to have these

@chrisprimavera7607 5 жыл бұрын

Have the M18 1/2" impact driver. Nice tool. Low speed is supposed to be 100 ft lbs but is less and will not tighten lug nuts properly.

@Ascendant_Nation 5 жыл бұрын

Great review. I'd like to see more power tool reviews, especially more Milwaukee tools. Definitely a fan of yours and a fan of Milwaukee Power tools. would love to get a kit like this.

@fuzzyfluffy9159 5 жыл бұрын

I could really use both of these Fuel Milwaukee tools. Thanks for the info.

@garrettmartin6267 5 жыл бұрын

Hey Charles! I would love to get a drill and impact! I just moved into an apartment at my college about a month ago. Week one was interesting...someone backing out next to my car in the parking lot ripped the bumper off my car. So instead of fixing the bumper I bought a light weight flywheel and metal slave cylinder for my B6 S4. It has really been a case of ballin on a budget with my story. Originally bought it for just over $2k and been dumping money into it ever since! Pulled the engine and did the timing chain job myself. Love the videos and the quality of your content. It's not over exaggerated and I greatly appreciate that! Keep being the dad your daughter needs! Shout out to one of the great dads! Build cardboard helicopters and make her laugh! Family is really all we got here!

@rafaelgon1979 5 жыл бұрын

DIYer here. weeked warrior working on my car!! would LOVE to have that Milwaukee kit as my first power tools!!

@metalback26 5 жыл бұрын

These would be great to have at work, (apprentice diesel tech). I had to borrow an impact yesterday to remove and reupholster seat bottoms.

@MrAcw1247 5 жыл бұрын

I'm just getting into the game and I have the baby brother m12 impact and it's so crazy how much torque comes out of it I love Milwaukee they are winning my my attention left right and center I love there stuff and hope to collect more and more and more

@myyord7963 4 жыл бұрын

Great, informative, no frills review. Thanks.

@salg500 5 жыл бұрын

Hey man, the last button is a self tapping mode for self tapping screws.. starts it off slow to minimize walking of screw then ramps it up to send it and stops just as you set screw in place to prevent stripping it out. Great video but wanted to clarify that for you and others that might not know. Cheers m8

@HumbleMechanic 5 жыл бұрын

Thanks for the addition. That is not a feature I've used in automotive. But I bet you can find a place for it. :)

@grgc5409 5 жыл бұрын

I would love to have this combo. Would be so useful around the garage

@Sly_Wolf_1 5 жыл бұрын

Nice review 👍

@HJCF0520 3 жыл бұрын

Very nice and honest review. Thanks!

@THEDRAGONBOOSTER8 5 жыл бұрын

I have just saved up enough and brought a brushless angle grinder but I went for a Makita ..I would like to give a impact driver a try but a Milwaukee.They are becoming popular..Great review..Thanks

@dewaynecurle7396 5 жыл бұрын

Thanks for the video. I have some of the M12s and they work great. I'll use those M18s for sure.

@ericpettett4842 5 жыл бұрын

Nice drills! I’m “jazzed up” about that impact driver

@bigd2203snuffy 5 жыл бұрын

I could use those every day. My old set is 15 years old and on its last legs. Batteries only last about 5-10 minutes after full charge.

@C4soulja 5 жыл бұрын

So I already have the older m12 brushless. Its treated me pretty well. I could use an upgrade but I'd never I'm doing ok for myself. I'd throw my hat in for an tech school graduate or apprentice though. Them young boys need all the help they can get with tools. If I see someone has serious drive and passion that I know is just getting started out I give him my old tools or take very little money. It's nice seeing new younger guys doing it. I feel as if that numbers falling to sadly... On a more AWESOME note! I just bought the new snapon thermal imaging camera. I know it's not a tool I need but I've been wanting one for.... shit.. at least 10 years. Pricey bastard but I'm looking forward to it!

@mikejf4377 5 жыл бұрын

Very impressive, I would love that tool.

@emkalime 5 жыл бұрын

I'm a Milwaukee fan as well. I have a M18 drill and angle grinder at my work and they are just awsome. I would realy like to have some for my self.

@markadams7597 5 жыл бұрын

Great review, as usual. Ty. Never really considered Milwaukee, being a DeWalt guy. The Fuel ID looks really great. I'll try to find a place I can "test drive" one.

@Richarddc9 5 жыл бұрын

Great show keep up the good work, from Australia.

@jonatwood7208 5 жыл бұрын

They do look nice, I wouldn't mind having them in my tool cart

@superXwhiteXninja 5 жыл бұрын

Those are some nice drills you've got there

@HoppysBronco 5 жыл бұрын

I support Home Depot motor sports. The impact would be awesome for my tool kit for auto tech school

@parkout95 3 жыл бұрын

Damn im old Remember when i just cared about candies Now i get excited for things like this lol

@craigdoesstuff5270 5 жыл бұрын

I just bought a house and have a ton of work to do and could really use these

@colinstu 5 жыл бұрын

Was actually just looking into these tools last week! Look great

@EdgarasSimanavicius 5 жыл бұрын

I'm from Europe so Milwaukee's are a little more expensive down here and are a little out of my reach just for working around the house and car. Would love to have some, maybe one day :)

@leelavinder2231 5 жыл бұрын

I’d love to have that combo kit for work and home!

@BrianA-bk6fx 5 жыл бұрын

This is almost exactly what I have been looking for...this particular kit is bit (no pun intended) out of my price range and I've been trying to decide between just going impact or drill.

@batterynice5280 3 жыл бұрын

@tylerlappa7356 5 жыл бұрын

Those tools are awesome!

@kacasio1 5 жыл бұрын

I would love to use the little impact gun. I borrowed a dewalt impact for a little bit and it really is a nice thing to just run down nuts and bolts really fast. Taking off exhaust with an impact helps a lot too.