Milwaukee M18 Jigsaw | Unboxing & Overview

Рет қаралды 30,609

Жыл бұрын

Unboxing the Milwaukee cordless jigsaw.
Products Used*
Milwaukee M18 Jigsaw: amzn.to/3WQ4o6e
Diablo Jigsaw Blade Variety Pack: amzn.to/3hwi2vk
Rockler Dust Right Adapter Set: amzn.to/3NXudND
**************
Connect
Instagram: / northwestcraftsman
Facebook: / northwestcraftsman
Email: See contact section
**************
Audio Credits:
Room for Two by Dan Lebowitz (Licensed by KZfaq Audio Library)
More Audio from Soundstripe**:
app.soundstripe.com/referrals...
*As an amazon affiliate, your purchases provide a small amount back to the channel at no extra cost. Your support is appreciated.
**Link above is an affiliate link which provides you a discount of 20% on your first purchase and Northwest Craftsman a rebate on our subscription.

Пікірлер: 44

@builtbyaftee 8 ай бұрын

If you recheck the manual you've actually got the dust collection settings swapped backwards which is why it wasn't working as well probably, it says to set the shuttle to the 'X' to blow air out of the dust chute, and the other setting to blow air out of the front

@NorthwestCraftsman 8 ай бұрын

Well that sure would explain it! That's what I get for not reading the manual carefully enough. Thanks for the correction!

@maha77 8 ай бұрын

Thank you so much for that simple explanation of basic assembly, so helpful for a newbie

@NorthwestCraftsman 8 ай бұрын

So glad to help! Thats my goal in all of this

@user-bw5xf3yr3m 2 ай бұрын

Perfect video, you were clear and covered everything. Thank you for your hard work

@NorthwestCraftsman 2 ай бұрын

Thank you! Glad you found it helpful.

@haroldt1791 Жыл бұрын

Thank you. Great video.

@NorthwestCraftsman Жыл бұрын

Thanks! Glad you found it helpful!

@JoePro1911 7 ай бұрын

Great video!

@NorthwestCraftsman 7 ай бұрын

Thanks!

@LivingOnWheels Жыл бұрын

That blower feature is nice. The M12 version doesn't have it.

@NorthwestCraftsman Жыл бұрын

Yes, it is quite nice. I ended up taking the blade guard off later when I was cutting and it worked far better.

@cowboychris. 10 ай бұрын

Great intro 👌🏽

@NorthwestCraftsman 10 ай бұрын

Thanks!

@LivingTheLifeRetired Ай бұрын

I watched your video to save me from reading the manual. The print is too small. Good video, thanks. What does the orbital mode do?

@NorthwestCraftsman Ай бұрын

Thanks! The orbital mode moves the blade forward on the down stroke for quicker, albeit rougher cuts.

@LivingTheLifeRetired Ай бұрын

@@NorthwestCraftsman thanks. Yesterday I tried out the saw and figured that out trying at a slow speed I could see the blade kinda moving forward on an axis. This thing is a beast.

@NorthwestCraftsman Ай бұрын

Sure is! I love it

@jbarsness5514 Ай бұрын

I have the same one. I'm a little disappointed that the dust port and the m18 wet/dry vacuum hose dont connect well.

@NorthwestCraftsman Ай бұрын

Honestly, I am as well, I tried it some more and it really doesn’t work great. I just accept the dust at this point.

@BackyardBeardMan 4 ай бұрын

Nice video, just bought one, you helped me a bit with that :) , but, I bought a really cheap, used one, Today I posted a video testing it out :)

@NorthwestCraftsman 4 ай бұрын

Nice!

@WiscoWoodShop Жыл бұрын

What are you using for your dust collection?

@NorthwestCraftsman Жыл бұрын

For this test, my 6HP shop vac

@WiscoWoodShop Жыл бұрын

@@NorthwestCraftsman gotcha. I think my collection wenta little bit better. I’m using a Hilti extractor. Also, I have the barrel style by Milwaukee.

@NorthwestCraftsman Жыл бұрын

Oh awesome! That’s good to know.

@stevewiner6490 10 ай бұрын

For me heavier is always better Let tool do the work Means it’s built solid and not cheap

@NorthwestCraftsman 10 ай бұрын

Very true! It’s at least a decent analog.

@Papiiswagg Жыл бұрын

My blade keeps going to the side. Any ideas what I'm doing wrong?

@NorthwestCraftsman Жыл бұрын

Like you try to cut a straight line and it veers to the side? Or the blade isn’t cutting straight up and down?

@Papiiswagg Жыл бұрын

@NorthwestCraftsman the latter. The blade tends to rotate as the locking system tries to lock in the blade. I did more research and I think I'm using a blade that is not made for that specific saw.

@NorthwestCraftsman Жыл бұрын

That sounds about right for what you’re seeing. Below are the blades that I got for mine and they work great. Also, I noticed it’s really stiff when you’re trying to get them in so make sure they’re seated fully. Jigsaw blades amzn.to/3mdyT8M

@coreynaar6862 Ай бұрын

My blade doesn't line up straight. Does yours?

@NorthwestCraftsman Ай бұрын

Great question. Mine did when it wasn’t fully inserted and then the rotation lock would push it a little. I needed to shove the blade in pretty hard to get it to seat correctly.

@petroczinationalrailservic10 Жыл бұрын

Can you use it to cut through 2”

@NorthwestCraftsman Жыл бұрын

The jigsaw isn't the limiting factor there, the blades for it will be. I used this plus the blades below to cut through a nearly 2" thick maple table though. So double check the blades, but the tool is very capable. My Jigsaw Blades amzn.to/3M2Tua8

@petroczinationalrailservic10 Жыл бұрын

@@NorthwestCraftsman I watched your video before commuting to purchase yesterday. :) It worked really well for the header design on the garden we built! Cut through the 2x6 no problems. :)

@NorthwestCraftsman Жыл бұрын

Glad to hear it!

@MikeSmith-wp7tx Жыл бұрын

Just unboxed mine to your video. Thanks

@NorthwestCraftsman Жыл бұрын

Glad you found it helpful!