I've had my nox600 for 2 years now, I've used other detectors that are good, but this nox600 is a beast to me. Found deeper older coins at places I know we're hunted several times by others and myself. I've taken it to areas in the woods where I felt I wouldn't find anything and came out with relics/old coins. 98 silvers in 1 season.

That is an incredible buckle! Great video and awesome content. Thank you for sharing.

Yep the 600 is a beast and still to this day its find so many cool saves ⭐️⭐️⭐️⭐️⭐️

The Equinox is a very powerful machine...600 & 800. That said, to harness that power takes time to learn all the nuances of the machine. I spent the better part of 2019 getting acquainted with my 600, and it seemed like one day it just all came together like an epiphany moment. It’s a great machine, and even better when someone takes the time to apply what’s in the manual from the beginning to the end. My suggestion is to learn each mode, and try each mode on the same patch of ground to see what difference it makes. I’m a relic hunter and primarily hunt in Field 2 for greater depth. Recovery speed also controls depth, and you can gain depth by LOWERING the recovery speed. BUT, when you lower the recovery speed, you must slow down your swing as well to get the most from the machine. Lots to learn, but once you learn the machine, it will become your favorite. I own the 600 and the 800, and they both are capable of the identical depth. I own all three coils, with the 6” staying on my 600, the 11” on the 800, and the 15” used occasionally for large areas with little trash to cover more ground. If the 15” got stolen, I really wouldn’t even miss it. Good luck. The Equinox is not for people who like turn on and go machines like the Garrett machines. They take time to learn. I sold my Garrett AT Max and 5x8 coil, and don’t regret it at all. JMHO, YMMV

Good hunt. Congrats on the buckle. New equipment always has a curve to it. Have fun.

Great video and finds. Thanks and happy hunting and good luck 👍👍

Just got my Equinox 600 today can’t wait to get outside and try it. The ground is really hard already bent a Corona trowel

Hey Randy,ive been running the 600 since last Sept. My advice for starting out,park 1. Recovery speed 3,iron bias 3. 5 tones,Noise cancel,ground balance. If you wanna set it up to relic hunt,Field 2,recovery 3, iron bias zero, 2 tones . Dont be afraid to creep the coil along,low and slow.Happy Hunting👍🏻

Superb video, nice to see you try the minelab, nice change for you, that buckle is stunning, that definitely travelled from another country in the colonial era, 1600s guaranteed with out a doubt, get yourself an equinox 800 and have fun Randy

That Continental Distillery cap is not junk. Hope you saved it or contacted the local historical society.

Hey Randy I’ve seen buckles like that found by the Hoover Boys. Definitely 1600’s or earlier! It is Pre-Colonial. That is a rare and incredible find!

Terrific buckle I use the Nox on the beach mostly, but do well on land when I hunt with it.👋

The Equinox 600 is a very deep detector, I have found a couple of quarters at 12 inches deep here in Georgia. I crank up the discrimination to eliminate nails, don't care to dig up nails.

Randy Great finds. Love the buckle awesome find. I just picked up the Nox 800 and learning that machine. Managed to find quite a few CW relics

Tones .... Tones... I'm still learning 👍 good luck !!

That iron you pulled up with that bottle cap… kinda looked like it was from out of this world.

Great machine

Ive had my 600 since Christmas and it is a very tough machine for me to learn. A ton of options that will give you a ton of information. Nice hunt"s"

I had At Pro for only a year, found some good stuff with it. I bought the Nox 600 when it first came out as loved how light it was, got that in 2018 I believe and never gone back to AT 😆 as I found a ton of stuff where I had thought I hunted out. Check out my vids as I show what numbers come up on the Nox, I'm liking this channel, HH and stay safe.

Settings??? Friend has one on loan ask me if I know how to set it up. We’re both lost.

You missed it because you used a Garrett . Unapologetic Nokta fan here .

I noticed you got a lot of different readings before and after you pulled out the plugs? That dont seem good. Should get the same reading before and after you dig a plug. So it seems like the dirt changed your VDI

Does it pinpoint? You seemed to miss low a lot :)

Etrac is a bit like 600

What’s the best way to setup the 600 ?

How much meter deep detect gold

With all that digging go buy a root slayer less then 100.00 Home Depot

Nice video, love finding old buckles. Are you going to get an Equinox? Check out our channel, Pa Relic Hunters, we all use the Equinox 800.

Are you a minelab dealer?

That a good detector why pay 1000 1400 on these new ones let others pay that buy used one let others pay that cause I don’t have that much still swing my old whites idx pro still find lots with that one detectors are not made like them printed micro boards can’t be modded