Minelab Manticore how to pair headphones and other headphone options tutorial

No video

Minelab Manticore how to pair headphones and other headphone options tutorial

Рет қаралды 6,732

Күн бұрын

Welcome to the Minelab Manticore audio tutorial. I’ll cover how to pair your wireless headphones first, then we will review other headphone options and the care and safety... I strongly suggest you stick around until the end as we will cover some important temperature information, including what to do if you submerge your detector without the dust cap installed properly. It’s important to Make sure your Headphones are off, turn on the detector, then a Long‐press (2 seconds) the Wireless Side Button. It’s really important you look at the status bar, if pressed correctly You should see The Wireless Audio Indicator flashing. This is telling you, it’s now searching to pair with the headphones. If no connection is made within 5 minutes, it will turn off. You must be no more than 3 feet from your detector to pair your headphones.
We also cover what headphones can be used with the Minelab Manticore and how to connect wired headphones.
I hope this answers the questions you may have.
Thank you so much for watching!
RDH Metal Detecting
Relic Dirtyhands

Пікірлер: 39

@mariuszdolinski67 5 ай бұрын

Thank You! One thing: to save auto connecting, never turn off headphones first, first turned off must be the detector.

@wbauerle Жыл бұрын

Thanks, this saved me at the beach

@RelicDirtyhands Жыл бұрын

You’re welcome ☺️

@kenb897 10 ай бұрын

Thanks Laurie and Eric..The adventure starts

@jimmymalone3494 Жыл бұрын

Great job I enjoyed your tutorial on the headphone.Thank you!!!

@RelicDirtyhands Жыл бұрын

You’re welcome ☺️

@bigdave10477 Жыл бұрын

It is crazy that a detector at this price doesn`t come with waterproof headphones, I detect in Ireland and rain is nearly always about. Another good video. Your Nox videos were my `go to` when I had any questions. Many thanks.

@RelicDirtyhands Жыл бұрын

Do you have waterproof headphones for the Equinox? They fit the Manticore to 👍. If you have any questions on the Manticore but you haven’t seen a video tutorial up, please ask the question and I can help. ☺️

@bigdave10477 Жыл бұрын

@@RelicDirtyhands Thank you, I need a full set of videos like you did for the nox please. I have shared those videos to lots of sites. Minelab should be paying you as the manual is rubbish. I am using the factory settings until I get more used to the Manticore. I will use a pair of wired lightweight headphones. Dave

@RelicDirtyhands Жыл бұрын

@@bigdave10477 Yes, I wish I had a full series complete, I found myself busier than usual and each video tutorial takes 2-4 days to create. It’s extremely time consuming. 😔

@bigdave10477 Жыл бұрын

@@RelicDirtyhands Thanks for all your hard work so far.

@alandraws7738 Жыл бұрын

Waterproof wireless or at least showerproof that are lightweight should have been standard , im not a fan of the big ones that make you look like Mickey mouse!.😆

@PinkPowerAllyTreasureHunter Жыл бұрын

Another excellent tutorial on the Minelab Manticore!!! WTG Laurie & Eric!!! I will be testing out my "Patriot Headphones" as I am told from a reliable source they too are compatible as underwater headphone. Spring can't come soon enough for some underwater recoveries!

@RelicDirtyhands Жыл бұрын

That’s awesome! Let me know how it goes ☺️👍

@GarnetCarmichael Жыл бұрын

Clear as a crotal bell, nice job!

@RelicDirtyhands Жыл бұрын

Thank you ☺️

@Looter8TreasureHunter Жыл бұрын

Need to get me one of those! 👍👍

@RelicDirtyhands Жыл бұрын

I seriously love mine!

@ajcrx0421 Жыл бұрын

I noticed the volume is a lot lower with the wired ML headphones. I have another pair of aftermarket headphones that I used on my equinox and they too sound lower in the Manticore compared to when I used them in the Equinox.

@RelicDirtyhands Жыл бұрын

Which wired headphones are you using? This is interesting, I came across a pair of headphones that had a lower volume. What helped was using the simple audio. The faint deep targets were difficult to hear but when I switched to simple, it was much easier to hear. Please let me know what headphones you were using. A product number if you can find it, or what detector the headphones originally came with. Example the Equinox 600 had wired headphones.

@Notime2readFXDLS Ай бұрын

Does anyone know if hard wiring the included bluetooth headphones disables the EMF output from them? I don't like wearing Bluetooth devices next to my head for extended periods. Anyone know?

@ReversXC Жыл бұрын

5:09 Will the headphone jack cover the LED light connected to the Montecore? The headphone jack is too close to the flashlight. The coil connector is located much further from the flashlight.

@RelicDirtyhands Жыл бұрын

I haven’t noticed it getting in the way as if yet 👍

@serenitybase9888 2 ай бұрын

you forgot to say what colour they go when fully charged?

@chuckbillings661 Жыл бұрын

Can I use the headphones in the rain or detecting in waist deep water

@RelicDirtyhands Жыл бұрын

It’s best to avoid getting them wet or humid, like my Equinox headphones. They seem resistant to a short light rain. I was once in a hail storm, I dropped my headphones to take cover and the inside got wet, the audio then became scratchy. If you can put a hood on, rain jacket I’m sure it wouldn’t be so bad.. but I’d recommend to be careful. Some have dropped them in the water, it’s a risk! They are expensive to replace so just be careful. The waterproof headphones no problem 👍

@BuenosDeus 5 ай бұрын

Manticore always sets off wireless connection, when detector is off and when I push on it again, no flashing icon on screen. How to set it, the connection will be automatic?

@RelicDirtyhands 5 ай бұрын

So once it’s connected, it’s so important that the next time you turn it on, you press the headphone button quickly and let go. If you press and hold the button on the headphone it will start the reset process. That means every time you turn it on it will need to repair. Try it, pair the headphones, then turn them both off. Turn it back on but this time press the headphone power button with a quick press and let it go. Don’t press and hold.

@Vidslayer 10 ай бұрын

If I do a factory reset will I have to redownload the update for the headphones?

@RelicDirtyhands 10 ай бұрын

Once an update is done, it will not be removed by a factory reset.

@petbytes7167 Жыл бұрын

What does it mean when there is a long high pitched tone in the headphones?

@RelicDirtyhands Жыл бұрын

Does it happen when you turn off your detector or walk away from it? If I remember correctly, in both cases I do get a tone in the headphones. Do you think this is what’s happening?

@hardyakka6200 Жыл бұрын

Damn, does this mean I need to buy one of these detectors? Otherwise, Laurie doesn't talk to me. I wonder if they find things? Have you thought of that Laurie they may be useless?

@RelicDirtyhands Жыл бұрын

Lol oh it finds things ha ha and I do talk to you 😝

@billclinton1059 2 ай бұрын

Manticore headphones are to big and to hot how do u use different headset like earbuds ect

@RelicDirtyhands 2 ай бұрын

Sorry I have no idea, I use the wireless and when it’s too hot I’m in the water with the waterproof ones. I haven’t tried anything else ☺️

@RelicDirtyhands 2 ай бұрын

I completely forgot about the WM09 Module, you can use earbuds with it, it still keeps you wireless from the detector. So sorry I should have thought of it.

@thecoinmagician 9 ай бұрын

The quality of the Headphones leaves much to be desired. For what you pay for the Detector the Headphones should have been far better. I tried some of the ML105'S on at a dealers , they are comfortable yes but they seem flimsy cheap china made headphones more for listening to music on than for metal detecting.

@RelicDirtyhands 9 ай бұрын

I’ve been using them and love them. I find them extremely comfortable and not flimsy cheap. 👍