Mini Bike Massimo Warrior 200 Clutch Install. External threaded uses lug nut.

Рет қаралды 3,652

Жыл бұрын

Please Subscribe!
Link for the part.
[Complete Torque Converter for Predator 212 Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2](www.amazon.com/dp/B07D9BNY91/...)
I recommend watching the entire video first before attempting the install to make sure you have the necessary tools.
Bravex clutch install on a Massimo Warrior 200 Mini Bike
This 196 Honda Clone engine uses the external threaded crankshaft, which requires the use of a shank lug nut.
I did my best with giving measurements to make the process faster and easier for your install.
Thanks for watching!

Пікірлер: 41

@AlShams69 7 ай бұрын

I owe you money for this video brother you don’t understand how much this helped

@mustangjackson67 7 ай бұрын

Thanks, this is the whole reason I do these videos with the hope to help people out.

@chuckhuff7123 4 ай бұрын

Let's just keep building, will yah 😮

@mustangjackson67 4 ай бұрын

lol. I have more mini bike content coming soon. Thanks for commenting and watching.

@AlShams69 7 ай бұрын

Was having so much trouble this helped me so much I ordered the lug nut

@mustangjackson67 7 ай бұрын

I am glad it helped. Thanks for watching and commenting.

@mrbuddyvlogs7316 6 ай бұрын

thanks mate this helped a ton

@mustangjackson67 6 ай бұрын

That’s great! Thanks for watching and commenting.

@chuckhuff7123 3 ай бұрын

Looking like raising that engine up would save you a bunck of cutting on your frame. And you can leave that tab, in case you want to go back to the stock application 😮.

@mustangjackson67 3 ай бұрын

The plate would have saved some. I didn’t modify the frame any, just the aluminum backing plate. Plus I never plan on going back stock 😈 just further modifications! Thanks for commenting and watching.

@eddiemiller7675 5 ай бұрын

Rubber strap wrench worked perfectly for me

@mustangjackson67 5 ай бұрын

Awesome! Thanks for the information and for watching.

@chuckhuff7123 10 күн бұрын

I got one of these, you got to start jacking with stuff on these, right out of the box, there slow 🐌 as shit. I hate to do it but off comes the governor and the we will start from there 😮.

@mustangjackson67 10 күн бұрын

Yeah they are definitely not speed demons. The clutch and exhaust helped a decent amount. Just remember you will have to go for billet flywheel at least when removing the governor. Thanks for watching and commenting!

@marklaramie7393 9 ай бұрын

Good job, very informative

@mustangjackson67 9 ай бұрын

Thanks! I appreciate the comment and kind words.

@marknye51.thefixitguy 6 ай бұрын

Aloha from Mark Nye thefixitguy here in Kaneohe Oahu. I have basically the same bike ans torque converter and need a cover just like that one but metal..if not metal the plastic will do. Where can I get one

@AlShams69 7 ай бұрын

This is a amazing video

@mustangjackson67 7 ай бұрын

Thanks for the kind words!

@MontanaMuzach Ай бұрын

Have you had any issues with the chain? Installing it shown like you did, the front small sprocket is definently out of alignment a bit with the rear sprocket. It cant be shimmed out with washers because that leaves hardly anything to thread onto on the shaft. Maybe I can loosen my motor bolts and get it to shift slightly to the drivers side.

@mustangjackson67 Ай бұрын

I have had zero issues with it and there has been a lot of miles put on this setup. I keep the chain clean and waxed pretty religiously. Thanks for comment and watching. Best of luck with your setup!

@PnVG22 4 ай бұрын

Awesome video, do you know if all of this applies to a 30 series torque converter installed on this same bike?

@mustangjackson67 4 ай бұрын

Yes it should install the same way. Thanks for commenting and watching!

@AlShams69 7 ай бұрын

Any problems with the 420 chain? I heard 410 is better

@mustangjackson67 7 ай бұрын

None at all. I ride it pretty frequently on and off road. I clean it and lube it every 2 hours of riding also.

@wayne4064 7 ай бұрын

Wouldn't a raised motor plate solve that clearance issue? Im looking into this exact one and several of them either come with or say a raised motor plate may be necessary.

@mustangjackson67 7 ай бұрын

Yes, you could have bought the plate and saved some hassle. I wanted to showcase it could be done without it. Thanks for commenting and watching.

@joer5057 6 ай бұрын

I bought a riser plate for my install, and between the gas tank, and exhaust, I couldn't get the plate I had to work. So, this method worked perfect.

@mustangjackson67 6 ай бұрын

@@joer5057 Thanks for the information and watching. Glad the video can help.

@MontanaMuzach Ай бұрын

Same. The plate made both the muffler heat shroud and the air box interfere with the top middle crossbar that the fake tank attached to. I tooke the airbox cover off, and banged the muffler but out of the way, but in the end, the muffler would be melting the seat and burning your leg. I ended up chopping the backplate like shown here, as well as trimming the mount for the old jackshaft plate. After lots of money in tools, a wasted riser plate, and about 4 hours, I've almost got it finished. @@joer5057

@marknye51.thefixitguy 6 ай бұрын

Can you tell me where you got the cover ?

@mustangjackson67 6 ай бұрын

The cover came on my mini bike new. I just modified it to fit over the torque converter. I get a lot of my factory parts from VMC Chinese Parts. You should be able to get one there. Thanks for watching and commenting!

@marknye51.thefixitguy 6 ай бұрын

@@mustangjackson67 I found one on Amazon

@mustangjackson67 6 ай бұрын

@@marknye51.thefixitguy Good deal!

@tomwarren7572 6 ай бұрын

I bought the exact part from auto zone and it didn't fit my Massimo 200

@mustangjackson67 6 ай бұрын

Do you know what model or year your Massimo 200 is? I don’t recall them having different pitches on the external threads.

@venuvee04 5 ай бұрын

@mustangjackson67 I'm not the same person, but what year is yours? looking for reference because i wanna do the same thing. mines a 2020. ashame they had to make these external, I'm dreading the process

@mustangjackson67 5 ай бұрын

@@venuvee04 Sorry for the delayed response. Mine is a 2022. I reached out to Massimo and they said 2022 was the first year for external threads. Thanks for watching and commenting.

@venuvee04 5 ай бұрын

@mustangjackson67 thank you so much for that information. that's amazing. my first worry was if it was a 3/4 or 5/8 and then that got cleared up. and it's awesome to know now it's also internally threaded