Mini Cooper Engine Rebuild!

Рет қаралды 99,820

Күн бұрын

Its engine rebuild time for the mini cooper! Enjoy..
Hoodies/Stickers - www.thesavagegaragestore.bigcartel.com
Business - savagegaragebusiness@gmail.com
Music - "Dreams" Instrumental by Temper Beats KZfaq - • Video Spotify - open.spotify.com/artist/4msU1...

Пікірлер: 205

@TheSavageGarage 5 жыл бұрын

I DID NOT USE THE OLD HEAD BOLTS!!!! If you watched the whole mini series you’d know the head gasket came with them 🤫

@tommcdermott5641 5 жыл бұрын

The Savage Garage hey savage me and you have the same bbq......... amazing 🔥

@NickHudson2 5 жыл бұрын

As well as that mate if they'd bothered watching this video properly instead of just having a go at you they'd clearly of seen you removing the new bolts from their packaging it was clear as day to see. None of the criticisms I've seen on this video are justified you've done a grand job of this car just a shame a few sour keyboard warriors are seeing fit to try and bring you down. Keep your head held high James you're quality all the best a Loyal appreciative subscriber not going anywhere 👌

@TheSavageGarage 5 жыл бұрын

NickH I appreciate you nick 👌🏼

@NickHudson2 5 жыл бұрын

@@TheSavageGarage Likewise mate for sure 👍

@wenstafarni 5 жыл бұрын

Will I ever be excepted on your insta

@fli2011 5 жыл бұрын

You deserve more subs mate, much better content than most of the most popular diy car KZfaqrs.

@TheSavageGarage 5 жыл бұрын

Fli- thankyou very much :)

@fli2011 5 жыл бұрын

@@TheSavageGarage Just the truth bud, you're the only one that truly gets stuck in. 👌👍

@michaelgillie5208 5 жыл бұрын

Cliff hanger ending lol Good work on rebuild and attention to detail. Will be a two for one next video as we will hear new exhaust too.

@daningram7309 5 жыл бұрын

The best channel on youtube. Love your enthusiasm and the way you explain things. This channel just keeps getting better. 👌👍

@Raymond-Gibb 5 жыл бұрын

It's amazing how complicated this stuff looks at first glance. Then you see it all torn apart and it looks pretty straight forward! Thanks for sharing this, its truly inspiring! 🙌

@murraydalziel1091 5 жыл бұрын

You are doin great pal. When I started you could jump in the engine compartment beside the engine ( Ford Angela 105e) and yet I still did not get as much done as you. You are teachin not just yourself but many many others. Fed up watching folks with 2 post lifts, Air tools and covered premises, you are the real deal. Keep up the good work, MDL

@darkbyte2005 5 жыл бұрын

popcorn, (check), youtube (check), Savage Garage (check), and cup a tea (check) press play ahhhh Great stufff..

@Thejoker-zg1gk 5 жыл бұрын

Top work man respect 👍🏻 it’s hard to believe your not a fully qualified mechanic just god the show all we need is hands on experience an a little help for THE SAVAGE GARAGE 🏆👍🏻

@nikolil1031 4 жыл бұрын

Great vids, I used them to do my own mini and they helped tremendously! Couldn't have done it without them. Keep up the great work. Great respect from all the way across the pond in Texas!

@dirksiebens6507 5 жыл бұрын

So glad I came across your channel! You deserve all the credits of the world for the way you present the work to be done and do the actual work. I have myself a 2003 Cooper S with 193 k KM which needs I'm afraid BIG work: cylinder 1 with NO compression, knocking sound when I start the engine, yet all valves 'look' ok when I removed the valve cover. Further investigation is needed. Thank you for the guidance you already provided me with your videos!

@classicgamer4451 5 жыл бұрын

Really enjoyed that rebuild James found it relaxing you are doing such a good job well done 👍

@mrt864 5 жыл бұрын

Excellent work again there. May I recommend that you turn the crank by 2 full turns (the crank shall turn 1 full turn) to check that the timing marks all align and that there's no valve to piston contact. The mark on the timing chain will move of course but this test will reduce this risk. Keep up the good work, very enjoyable to watch.

@richardcallison1637 5 жыл бұрын

Another great video! Can’t wait to see the mini fire up! By far my fave project of yours! Thank you👍

@jameshowson8165 5 жыл бұрын

Bloody hell you have done it again I stop the video to get a coffee come back and I have to wait until the next video lol, great video dude you are doing really well and good job on the mini mate

@NickHudson2 5 жыл бұрын

Cracking video James, Your attention to detail in what you do and drive to do it well is just brilliant you're a definite inspiration that's for sure. Hope the Mini serves you well as the Focus replacement all the best mate you're doing great!

@richardcollings371 5 жыл бұрын

Ooh, you tease! As always, really looking forward to the next video. 👍👍

@andrewstait 5 жыл бұрын

Really loving this series on the Mini which has me watching the other videos that you are publishing. Quite simply awesome - well done, it’s addictive watching now 😊

@alekchodorowski8929 5 жыл бұрын

Good approach, do not rush this kind of job. This looks super easy when we watch you at work, but you look tired. Great job!

@Thanos.m 5 жыл бұрын

Excellent work great video ! Just a quick tip when I worked at a garage we used to clean engine parts like this valve cover gasket with petrol just stick a brush into a little bit of petrol and it got everything very clean

@adfinch69 5 жыл бұрын

You make it look easy. Job well done done 👍👍

@alchapman1052 5 жыл бұрын

Good job there, looking forward to the big turn on , you’ve done an amazing job .

@TheDaf95xf 5 жыл бұрын

Good work on the mini 👍🏻 love the blackbird singing in the background......😄 It gives a chilled out feeling to your video 🤣

@scottbikerdude4337 5 жыл бұрын

Great video,the little tips like cleaning out the holes where the head bolts go, I wouldn’t of thought of that. That’s why I don’t do these type of jobs although I enjoy watching how it’s done. Keep up the good work.

@fuckthis81 5 жыл бұрын

Great progress again mate. You have put a lot of work into the engine. Hopefully it runs well once started!

@markharris7662 5 жыл бұрын

Great work. Looking forward to the start up.

@robl1927 5 жыл бұрын

Hopefully when you mullered the top of the spark plug tunnels they won't knacker the new seals when cam cover is installed, check the plug tunnels for oil after a run. Otherwise top job. Good videos, keep up the good work James. We all learn or are reminded as we go, great value for all of us.

@cjmillsnun 5 жыл бұрын

There was clearance between the tubes and the seals as is normal for this engine. The top of the plug lead is what makes the seal. in other words. It'll be fine.

@gotany1 5 жыл бұрын

Did you ever think you would get to do these sorts of things many years ago, and do a outstanding service to the internet teaching people to be not scared to have ago, but the biggest bonus is having a smile all the time and seeing you are enjoying it.

@notmanynamesleft 5 жыл бұрын

Also endless opportunities for bigger and better builds as life goes on,if you have the knowledge and skills to do something like this you should prosper 👍

@glennmoffett6349 5 жыл бұрын

Loving the mini videos mate keep up the good work 👌

@steve0680657 5 жыл бұрын

When you do the torque wrench 🔧 you gotta stop literally as it clicks. By going that little extra bit after the click you could be adding on say 10% more..... Eg 44nm instead of 40, or 110nm instead of 100nm It probably won't matter but better safe.

@Riyazatron 5 жыл бұрын

@Kris Nicholson simple spring torque wrenches like the one used do add extra torque. You will over torque

@Riyazatron 5 жыл бұрын

@Kris Nicholson exactly. The click part is the spring giving way. However the head is still attached to the arm. Therefore you can still generate a force where your hand is and over that length, a torque. Also going over the same bolt after the click isn't right. But it is minor. The whole thing can be ignored if your tool hasn't been calibrated in a while. Most companies do it yearly. All depends how you store the wrench.

@steve0680657 5 жыл бұрын

@Kris Nicholson he went further that the 'play' that is literally the few degrees as it clicks. Watch again. And once it's clicked that's the 'play' of the click action gone....further turning = more torque.

@takemebacktothe80s15 5 жыл бұрын

Wicked video dude really like your explanation of things and your attention to detail your camera angles are fine too . The spanner God's will be proud my brother take care ✌

@bencrosbie 5 жыл бұрын

Loving the video content so much! awesome rebuild

@coolissimo69 5 жыл бұрын

Great job cant wait to see it complete.

@thenorthernlad1349 5 жыл бұрын

Some boy Mr savage garage just goes to show you can do anything if you put your mind to it top channel keep it up lad ( long long time subscriber ) 😎🖒

@thenorthernlad1349 5 жыл бұрын

@justin brown I tottaly agree I'm the same always do things myself it's easy when you do the right research and teach yourself save money and makes you feel good to look at what you've done 🖒

@tcpnetworks 5 жыл бұрын

Nice work! Very methodical.

@richie9777 5 жыл бұрын

Good work. Well executed..

@baldamature372 5 жыл бұрын

I personally think the next build should be a Kit Car, using what you have learnt and build something from scratch, like a 7 or Robin hood with a big lump in, top work lad!!

@ChazzCoombes 5 жыл бұрын

Forgot to mention James over the summer im gonna be doing my head gaskets on the ST220 double the work double the parts lol. Enjoying your vids

@markburchett7714 5 жыл бұрын

Another cracking video Savage.👍🏻

@Jacob_Field 5 жыл бұрын

Made sure with the mini you tightened the intake bolts up. Don’t want another Astra situation!! 🤣

@waltermelonz1487 5 жыл бұрын

Well done mate. Quality content 💪

@mariopires2000 5 жыл бұрын

Good work James ! Greetings from Portugal !

@christophersidaway 5 жыл бұрын

Looking forward to see it run again.

@Phil-1969 5 жыл бұрын

Great work again James

@taylorhaddock2782 5 жыл бұрын

Brilliant video as expected

@paulandsarahcaravanlife 5 жыл бұрын

Great video James. 😎👍👍👍👍👍👍👍👍👍👍

@jimwallace2296 5 жыл бұрын

a good tip I got told years ago is to mark each nut/ bolt with a piece of white chalk as you tighten them its then easy to check if you missed any

@sush1chef 3 жыл бұрын

Nice work bro

@alexdolling 5 жыл бұрын

Oddly soothing, thanks

@martinhall5980 5 жыл бұрын

Top top channel ! Keep it coming. Ignore the hate my man.

@Mrflash222006 5 жыл бұрын

At least there’s a little room around the bay, I just did the vanos solenoids on a R56 with a N12 1.6 twin cam and that is possibly one of the tightest bays I have worked on

@colwyn9 5 жыл бұрын

Glad to see there wasn't a woodruff for the cam sprocket, good job you really shouldn't keep turning the torque wrench after the initial click as it's still applying torque and would be like using a breaker bar instead, I would also invest in an torque angle gauge they cost pennies and are more accurate than the eye

@jusb1066 5 жыл бұрын

Nice job cracking on,

@millionairedonkeylover3034 5 жыл бұрын

Myself and everyone down on the farm loved the video. The donkeys told me to say hi to you 👋.

@lofty7180 5 жыл бұрын

great content as always,,if i was being picky id say stop appologising as theres really no need. looking forward to the start up vid of the mini.

@JustAnOrdinarySimmer 5 жыл бұрын

Good stuff James, would love to see a Celica project - can pick them up cheap

@nicksmith633 5 жыл бұрын

Are you going to crank the engine over a couple of times by hand after this I would do it on the starter with the plugs out . I would use cheap oil and change it say after 100 miles then refill with good stuff . Does the cooling system need flushing out as well , good job well done.

@thomasbennett9851 5 жыл бұрын

Awsome work 👌

@banditbeggers533 5 жыл бұрын

Nice work mate

@Cjrelectrical 5 жыл бұрын

Great video enjoyed that. Top work. Is that a 3/8s torque wrench your using?

@davidharris328 2 жыл бұрын

I saw the New head bolts you got in the white card board box (that came with the head gasget) watch the whole series in future. General note. The 90 deg turn stretches the bolt and changes the metal structure in the bolt. (Thats the reason you always use new bolts).

@silva-anderida7695 4 жыл бұрын

Added content at 12:29,as two male Blackbirds declare their respective territories.An excellent video,I earned a lot.Cheers.

@silva-anderida7695 4 жыл бұрын

'learned' a lot,obviously.Sorry.

@paulillingworth1242 5 жыл бұрын

Another good video 👍

@iPakistani 5 жыл бұрын

Good job bro love you videos

@astonrichardson4309 5 жыл бұрын

Good job 👏

@simantroo 2 жыл бұрын

If you cut the top off 2 old head bolts you can use them as guide pins to locate the cylinder head accurately without risking damage to gasket. Head bolts assembly fluid or oil not WD40 as its a releasing fluid not a lubricant. Cheers 👍

@notmanynamesleft 5 жыл бұрын

Good job 👌

@jaycifer6 5 жыл бұрын

Greay stuff :) hey when youve torqued the bolts down put a dot of paint on them so you know which ones have been done :)

@andrewreynolds2647 5 жыл бұрын

great job.

@brendanbradyfan3589 5 жыл бұрын

Savage garage good video

@milesfinch 5 жыл бұрын

I hope you turned the engine over by hand after fitting the head?

@ergz-vr6 5 жыл бұрын

Loving. Your content

@RedShiftStore 5 жыл бұрын

You’re very interesting and informative to watch. I’ve gained a lot of knowledge and interest for cars since watching your videos

@florescentshadow8386 3 жыл бұрын

Whats the manual you were looking at? Love the video.

@BillyNoMates1974 5 жыл бұрын

cant wait to see it all running again. you have done a lot of work. regarding the head being skimmed, will the engine need to be 'ran in'' ? or does it just need a bedding in ? driven gently for the first hundred miles

@michaeldavidson4510 5 жыл бұрын

This is great content.👍 God knows why you get thumbs down??

@TheSavageGarage 5 жыл бұрын

Michael Davidson the internet lol

@Mark-fe8qw 5 жыл бұрын

Trolls

@kriswalsh7680 5 жыл бұрын

I'm sure you will do this. Make sure you change the oil with flushing oil and then again. I'm sure your have water etc in the sump. Also maybe pour a jug of oil over the cams before you put the rocker cover on. Good video thou

@michaelgillie5208 5 жыл бұрын

Get onto OPIE oils through ebay for good quality stuff. They recommended fuchs for my astra. It's never been quieter and longer lasting oil too. Hasn't used a drop.

@harrysearle-ln6se 5 жыл бұрын

Loving the series so far but cant help notice the fiesta and wondering when it'll be back

@shann90 5 жыл бұрын

A right cliffhanger ending when is the next video up?

@AndykSuper2 5 жыл бұрын

Maybe a parts washer next mate? Great video..

@gwengo4167 5 жыл бұрын

Another amazing video👍🏻 I think you did a great job with filming at the same time. I’ve never done anything like this before, so just out of pure curiosity, do you not need to use gasket sealant of any kind on the head or the valve cover?

@cardude5323 5 жыл бұрын

Time to get an air compressor. Makes cleaning out those head bolt hole 100x easier.

@TheSavageGarage 5 жыл бұрын

Car Dude I do have one I was too lazy to get it though 😬

@bmwbandit86 Жыл бұрын

What gaskets are required besides head gasket and valve cover gasket and spark plug tube rings and exhaust manifold? Any others I will need? About to replace a head with shotty valves

@dustinjahn9227 5 жыл бұрын

I have a 2015 mini cooper s how much would it cost to forge the internals?and where would I find the parts I've looked everywhere

@anthonykenny1120 5 жыл бұрын

Good video Sav...you need to get a garage,,

@duckscrossingtheroad 5 жыл бұрын

Nice little trick with lining up the sprocket and chain, how did you know if the crankshaft stayed in place?

@spiked4735 5 жыл бұрын

Because even a stationary crank in an engine torn down this way requires a good bit of force to turn. Plus the chain held with the bungee cord means he knows it hasn't moved because the chain will be snug on the crank sprocket.

@chrischaos4 5 жыл бұрын

When's the next video up?

@vespamorelli7090 5 жыл бұрын

Fantastic content, learning so much from watching your vids but you may stop with this teasing caper ....... some of us are very impatient 😂😂😂 looking forward to seeing it start up 👍🏼

@Zadster 5 жыл бұрын

Keep your hair on guys, the new head bolts came with the head gasket kit.

@A6RXN 5 жыл бұрын

Zadster why were they in the cardboard? That’s what confused me

@Zadster 5 жыл бұрын

@@A6RXN I guess it stops the bolts rolling around in transit and damaging each other? Dunno.

@fedup2811 5 жыл бұрын

Come on James bursting to see it run

@Mark... 5 жыл бұрын

Nice work Sav, looking forward to seeing it running 👍 iam sure the millionaire donkey lover will too.

@millionairedonkeylover3034 5 жыл бұрын

Mark D , Myself and everyone down on the farm loved the video. The donkeys told me to say hi to you 👋.

@Mark... 5 жыл бұрын

Millionaire donkey lover tell them “hi” back and I hope they are being good and have stopped making asses of themselves.

@MrVidz 5 жыл бұрын

Where did you get the thermostat housing from ?

@magnump.i6906 5 жыл бұрын

Hi could you tell me if you tighten head bolts 11 and 12 also 90 degrees. Many thanks

@joshua123456789927 5 жыл бұрын

How did you stop the chain falling off the crank pulley at bottom ?

@jacklambo7346 5 жыл бұрын

Nice vid Next up midland box rebuild 😂

@carlosarteaga3250 5 жыл бұрын

That's what I'm waiting for...😂

@devliegendevlindertjes8896 4 жыл бұрын

I have a audi a4 2.4 v6. It needs a new head gasket and timing belt. Where can i find the torque for all the bolts?

@DavidinEssexUK 5 жыл бұрын

Where did you find the details for re torquing the head bolts, looked like a Haynes manual but I thought they didn’t make them any more.

@shann90 5 жыл бұрын

Im sure they still sell them in halfords or eurocar parts

@ergz-vr6 5 жыл бұрын

Mate. Have you got a link for the toque wrench you have please as I need one my self

@michaelperry4308 3 жыл бұрын

Try a syringe and plastic pipe to de oil the head bolt holes, saves time and tissue.

@miabidwell8324 3 жыл бұрын

to become a mechanic do you have to attend school if you do what gcse do you need

@lewishill64 5 жыл бұрын

Cheeky tip, rocker/head/cam covers come up well after a wash in a dishwasher.

@superseven220 5 жыл бұрын

And also ruin the dishwasher at the same time😂

@lewishill64 5 жыл бұрын

Peter Gillam, well I’ve never had any issues, I’ve done rocker covers, callipers, other engine parts, hoses. 😂