【ミニ四駆】B-MAX Mach Frame Fm-A Ultimate Build Tutorial

Рет қаралды 119,778

11 ай бұрын

#B-MaxGP #XStock #mini4wd
Hello Guys, I am Introducing my second fm-a build, this time with a little more details of how I made the machine. It also included tips that might help beginners and ways to improve performance.
The B-Max category is so fun to build, with many possibilities and new ideas for newcomers even veterans.
If you think this video is helpful, please like and make comments, this actually helps me to motivate making another video. Also if you have any suggestions, feel free to write them down. There are so many things we need to share and learn to improve our mini4WD community.
Thank You guys for watching! God Bless!!
#bmax
#mini4wd
#tamiya

Пікірлер: 197

@vonfami2438 10 ай бұрын

Nice set up well done🎉🎉

@teohweekeatsamteoh775 8 ай бұрын

Thanks for sharing bro !! I also using FMA Mach Frame, use blue colour propeller shaft to go faster !!!!

@ianvaliente8843 11 ай бұрын

Angas ng build ❤ more power lods.

@johnandreilintag1642 8 ай бұрын

eto gusto build tutorial. hindi tinipid, lason kung lason. eto gayahin ko 99%, 1% kasi hindi ko lang gusto ung red. un lang. Tnx bro for sharing!

@user-wm2nz8fy6i 11 ай бұрын

Beautiful Mach Frame 👍👍👍

@minivictorydonkey 11 ай бұрын

Thank you sir. More power, TMAC Thailand 2023!!!

@juvz7764 8 ай бұрын

Sir good day po yung microlon ba na ginagamit mu is yung pang sasakyan yung treatment para sa transmision?

@giatriyadi7052 5 ай бұрын

How about using front sliding damper carbon? Have u ever try building it... and how its run?

@russelpineda2897 4 ай бұрын

can you include what size of screw did you use in everything components?

@MarkAmps 8 ай бұрын

Hi, I am new to BMAX build and I am curious on what is the whole thing you did with the hollow gear shaft. What is the purpose of pushing and pulling the pinions? Thank you.

@minivictorydonkey 7 ай бұрын

adding a marker, strengthening the gear from the shaft

@MarkAmps 7 ай бұрын

Got it. thank you for the explanation@@minivictorydonkey

@Benj0010 9 ай бұрын

Any substitutes on microlon same effect? I can’t find any in philippines

@panjileonartha5378 7 ай бұрын

nice❤❤❤❤❤❤

@horhorpig 8 ай бұрын

can explain what's the purpose of drilling through the wheels to expose the shafts?

@minivictorydonkey 8 ай бұрын

because it`s a 72mm shaft

@TheLauncherX Күн бұрын

What type of microlon you use? There are many types

@neilsagenes872 4 ай бұрын

Halos same settings po pero inconsistent ung akin sa traditional lane change. Mas ok po ba kung lagyan ko spacer front plate para mag down thrust ung front rollers?

@EMSAYMADA 11 ай бұрын

💯💯💯

@adzbefg 11 ай бұрын

Hi awesome vid! Can you explain what you did with the hollow propeller? Why were you filing it and was that permanent marker? What was it for?

@minivictorydonkey 11 ай бұрын

Thank you sir for commenting😊 Its an oil based marker, it gives strenght to contacting gears from loosing when dries. More reliable and easy to apply than superglue.

@adzbefg 11 ай бұрын

@@minivictorydonkey Oh that's what is was. Thank you!

@bienamorpesa1642 10 ай бұрын

@@minivictorydonkey follow up question. What's the brand? Meron din kaya dito sa pinas? Salamat Idol.

@KonzTech 2 ай бұрын

Does bmax allow ultra dash?

@arielbonghanoy9647 8 ай бұрын

Ano size ng spacer para sa gear??

@wllmndsTV 4 ай бұрын

Sir hello! Tanong ko lang po paano po iinstall yung wheels na maging equal yung nakaprotrude na shaft? Thanks po newbie here.

@legendary_brigade 7 ай бұрын

Hello. Quick question for a beginner like me. Why did you have to purchase those shafts when they are already included in the kit? Are they different in length or something?

@minivictorydonkey 7 ай бұрын

Thank you sir for commenting. I preffer hollow propeller shafts, and it has a better pinion gear attached in my opinion.

@legendary_brigade 7 ай бұрын

@@minivictorydonkey thank you for the reply. would you mind to explain the logic behind it? lighter for the shaft? and for the pinion gear?

@minivictorydonkey 7 ай бұрын

@@legendary_brigade basically it was made lighter and gears has less contact to chassis giving less friction. Since its a BMax build, modification is limited, strengtening a pinion is the only thing I can do.

@j.rinaldi 8 ай бұрын

Please enlighten me, why use a regular nut and not a lock nut on the rear roller? Will it not be loosened by roller pressure?

@minivictorydonkey 8 ай бұрын

Yes sir, since it's stainless steel, it is more stronger and durable when tightening with more pressure than aluminum locknut and also lighter than steel locknut.

@j.rinaldi 8 ай бұрын

@@minivictorydonkey thank you for your good insight, please keep on racing and share us more about the knowledge.

@BluePepper26 9 ай бұрын

How much total price?

@myHombre 6 ай бұрын

17:17 the free is Good😮😮 them master

@faizrozaini2922 7 ай бұрын

sir, for the bonus part. between reinforce plate 13/19mm and rear brake stay, are u sure u use 3mm spacer. its look like 1.5mm. thanks in advance. hope u reply

@faizrozaini2922 6 ай бұрын

notice me sir

@minivictorydonkey 6 ай бұрын

hi sir, sorry for the late reply. Yeah, it's a 1.5mm aluminum spacer

@bodrekt464 Ай бұрын

ano pong pwedeng alternative ng HG carbon rear stay na FRP plate po?

@lordhao17 4 ай бұрын

ano pong tawag metal thing na nilagay niyo sa yellow gear around 16:41?

@nixonmewengkang1030 10 ай бұрын

Can you try to build a suit from an SFM chassis?

@TIMOGLOCKY91 2 ай бұрын

Hi Sir, very helpful video! can i just check which type of microlon u are using? i saw there are mulitple types in the market. thanks in advance!

@minivictorydonkey 2 ай бұрын

I'm using red one

@jonathangarcia1209 2 ай бұрын

Sir where to buy the microlon? Im from philippines

@user-sc2yw1eb5d 20 күн бұрын

Fma는 아무것도 하지 않았을때 가장 좋다

@malevokeytmann6163 5 ай бұрын

Is the microlon oil? Can i use just regular bearing oil? And can regular bumper frame be used instead of HG ones?

@malevokeytmann6163 5 ай бұрын

and what did you use for the side damper screw cap? plastic tubes? or can ballcaps be used?

@raymonddelacruz4949 5 ай бұрын

which size po ng cap screw ginamit sa DAR?

@zaldydoc 6 ай бұрын

Hello sir, lagi ko pinapanood mga vid content mo lalo na itong bmax build mo. Interested lang ako dun sa microlon treatment mo. Ano specific type ng microlon gamit mo sir? Nag search kasi ako, marami palang variants ang microlon. I’m looking forward for more of your vid contents.😀 I’m from Calgary AB Canada btw.

@minivictorydonkey 6 ай бұрын

Hi sir, thank you po. I am using Microlon with the red packaging, it has two variants, a 236ml or 473ml

@ronparcs8990 6 ай бұрын

Microlon is a brand sir what type of chemicals did you use? because there's a lot of variants of microlon.

@minivictorydonkey 6 ай бұрын

Yes, im using the one that has red packaging. Havent tried yet, rest variant may have better result depends on its grade and use

@HarryOff 6 ай бұрын

Please make more vids!!!

@marnierochellecapanan4623 4 ай бұрын

Good afternoon. New subscriber here, im planning to copy this design where will i put my sponge brake

@minivictorydonkey 4 ай бұрын

Hi sir, thank you for commenting, Check my recent upload about brakes. Hope it will helps kzfaq.info/get/bejne/Y9pmopt90p-WdGw.htmlsi=WOMaJSbbou8LZ6SB

@rizkiwgaming1663 9 ай бұрын

hey sir, cap screw for what?

@minivictorydonkey 9 ай бұрын

44:10

@Pasaway453 Ай бұрын

Sa bmax ba kahit anong chasisi pwede?

@kakanini2350 11 ай бұрын

hi im trying to copy your build and im new in building B-max what's that black thing called in the tip of your front bumper hope you answer my question thanks 😇

@minivictorydonkey 11 ай бұрын

You mean the stabilizer (15528)?

@kakanini2350 11 ай бұрын

@@minivictorydonkey YESS thankss😊

@invalidinformation 11 ай бұрын

Fighting machine

@normanquitlong5405 6 ай бұрын

@@minivictorydonkey hi! how did u set up your front rollers up to the high mount stabs?

@pardselmertv 3 ай бұрын

Your store is still open?and where is your location?

@junjunjun5105 23 күн бұрын

Question lng sir.. para saan po ung Hg ball bearings na 4 pcs. And 4 pcs na ao 620 bearings? Dba meron na bearings din ung mga rollers? Kaya nagtataka ako pra saan ung 4 na ao bearings?

@ariefpradhanabrilliano365 7 ай бұрын

how you get tamiya 95259, it's out of stock dude? where you buying that?

@minivictorydonkey 6 ай бұрын

I have stock for myself

@kuyaJD22 11 ай бұрын

Hi can you send me the full specifications of your build? I wanted to try this build. Thanks!

@minivictorydonkey 10 ай бұрын

Hi sir, all informations you need about the build are already in the video😊

@carrot7473 8 ай бұрын

pwede po ba mag lagay mg bearing spacer sa mag wheels sa bmas??

@yobyggi 3 ай бұрын

Good day! Ask ko lang if nilakihan mo ba yung butas nung mga screw hole sa rear setting mo using a drill bit o nirekta screw mo lang? Currently using your setup kaso nagkakaproblema kami sa rear setting kasi ayaw tumagos ng mahabang screw, parang may tinatamaan siya tapos hindi ayaw na tumagos, worse, naii-stuck na yung mismong screw dun sa screw hole. Sana mapansin. Thank you!

@minivictorydonkey 3 ай бұрын

Hi sir, oo nga, tama po ung sabi nyo. This problem is common almost every chassis. Maybe making a tip video about this matter in the future. Ang ginagawa ko po is gumagamit muna ako ng maiksing screw na may malaking heads para mas madali ikutin gamit ang drivers. Bago ko kinakabit ung permanent screw na mahaba.

@yobyggi 3 ай бұрын

@@minivictorydonkey Thanks for the reply! Muntik na kami mag champion dahil sa setup mo, namali lang kami ng choice ng makina, instead of Power Dash, nag Hyper Dash 3 kami dahil natakot kami baka mag course out dahil medyo technical yung layout nung laro, after the race na namin triny yung Power Dash ayun sising sisi kami haha! Sobrang stable manakbo nitong setup mo. Salamat ulit!

@arielbonghanoy9647 7 ай бұрын

Sir yong para sa motor na gear may kaibahan po bah sa black at violet??

@minivictorydonkey 7 ай бұрын

Purple 8T pinion gear is prohibited from use on FMA and AR chassis

@arielbonghanoy9647 7 ай бұрын

Black lang pwede?

@TitoRaymzMini4wd 2 ай бұрын

Ano kaya problema nang FMA ko, pag lapag parang di kumakagat yung gear tapos ambagal. Sabi nang kaibigan ko yung lalagyan nang propeller shaft sa rear ay parang nag concave na daw kaya parang pag nilapag umaangat na yung propeller shaft

@rus8237 9 ай бұрын

Sir pwede po kaya fluorine coated steel bearing as substitute sa ao 620?

@minivictorydonkey 9 ай бұрын

Yes sir, use any 620 ball bearing depende sa budget👍

@erzhel14 9 ай бұрын

Drill size you used on mags? Thanks

@minivictorydonkey 9 ай бұрын

I always use 1.7mm or 1.8mm drill bit only

@erzhel14 9 ай бұрын

Another, can i use side stay MA instead of AR? Thanks

@Mendoroko 6 ай бұрын

Hi bro, around 37:45, ask ko lang na talagang medj may friction ang roller pag itry iikot? since need higpitan yung normal nut or else mag lloose siya.

@minivictorydonkey 6 ай бұрын

sometimes rollers don`t rotate smoothly, but as times goes by it will fix itself or got worse. Maybe bearing spacer is damaged already

@raphyconcepcion3277 6 ай бұрын

Hello po. Ilang linggo ko na po pinapanood to for reference. Salamat. Sir ask ko lang po - ano po ung black na nilagya mo sa shaft aa labas ng mags at un pong black sa screw ng mga dampers Salamat po

@minivictorydonkey 6 ай бұрын

hi sir, thank you for commenting. It's a rubber pipes

@godwinrazon Ай бұрын

Why dis you put a roller spacer on the counter gear? Is it allowed for BMAX category?

@minivictorydonkey Ай бұрын

Yes sir

@giatriyadi7052 7 ай бұрын

HI.... im from Indonesia... here we Usually use SFM carbon Chassis... but its expensive here... and we have this FMA try to beat thoose SFM domination.... and your vieos is helping us alot.... but in indonesia we have rules : Front : maximum 2 FRP/HD carbon, rear : maximum 3 FRP/HD Carbon.... can we use 1 Fully Cowled Stay for the front, and 1 stick carbon below for underguard and as a brake Stay? or may be you have a better option for the 2 FRP in the front...? thankyou! greeting from Indonesia

@minivictorydonkey 6 ай бұрын

Hi sir, thank you for your comments. I think you should use a much thicker plate for your front settings. Try to double your Fully cowled Stay and don't add any stick for brakes. All you have to do is use 13mm DAR on top then add 9mm bearing rollers below. Then use the FMA under guard for your front. Add more 2.5g mass damper each of your sides stays 10.1g total and the rear stays 6.7g. Use 40x20mm 2mm thickness for rear brakes.

@giatriyadi7052 6 ай бұрын

@@minivictorydonkey thank you bro for the replies... i will build it as similar as your advise... i have 2 machine, one is CopperFang BS with FMA Chassis and another one is Victory Magnum with carbon super II chassis... I hope we can get some Super II carbon ultimate guide for the next project 😁😁 keep going and have a nice day bro

@randymdade5226 4 ай бұрын

what size drill bit to pierce the rims?

@aperson4075 4 ай бұрын

1.8mm

@andreitolentino4231 10 ай бұрын

ano po diameter ng tires?? thankyou po ☺️

@manucalara6837 9 ай бұрын

Question lang sir, may cut po ba sa front yung mach frame mo, para mag fit siya dun sa 3mm na plate? Same kasi tayo ng plate sa harap kaso hindi mag fit yung mach frame ko. Thanks po.

@minivictorydonkey 9 ай бұрын

Hi sir, what I did is curved the edge and attached with little force

@thedarkst4r 6 ай бұрын

@@minivictorydonkey Same inquiry, but which part did you curve? The cowl or the plate itself? Thanks! Awesome build!

@devourment89 3 ай бұрын

Hi! Newbie question po. Will this kind of build be effective on S2 chassis as well?

@minivictorydonkey 3 ай бұрын

Hi sir, I don't know😄, not tried yet and my current S2 build totally different from Fm-A. Sorry

@devourment89 3 ай бұрын

@@minivictorydonkey Thank you, sir! I wish you could also show us your S2 build.hehe thanks again!

@ezraarevalo4902 10 күн бұрын

sir stock tires at mags lang ba yung gamit mo na kasama sa kit?

@minivictorydonkey 7 күн бұрын

Yes sir

@ezraarevalo4902 7 күн бұрын

@@minivictorydonkey sir last question yung pagkakasunod sunod ng mga parts sa DAR mo pwede ba malaman, wala kasi sa vid hehe newbie lang po

@defaultchannel5582 9 ай бұрын

B-MAXはポン付けが基本で、以下はレギュ違反です。　アルミベアリングローラーからベアリングを外す。タイヤをヤスリで削る。

@minivictorydonkey 9 ай бұрын

コメントありがとうございます。 B-MAXは、使用するパーツは無加工で基本です。ベアリング交換やメンテなど可能なので、もちろんベアリングはローラーから外すのはルール違反ではならない。だとしても、見分けられににくくなるだけです。基本的に、ローラーのベアリングはローラーでポン付けられているだけだから。ペラタイヤ不可能ですが、タイヤのバリ取りは大丈夫だとおもいます。何かまだ、不明な点等ございましたら、ぜひコメントで聞かせてくよろしくお願いいたします。

@imjopz 7 ай бұрын

How to do the countersink? Thanks

@minivictorydonkey 6 ай бұрын

Tamiya has a countersunk bit available

@lush_one1614 8 ай бұрын

how to countersink

@EMSAYMADA 11 ай бұрын

Pwede ho kaya Pertua Oil and Metal Treatment for substitution po para sa Microlon, Sensei?

@minivictorydonkey 11 ай бұрын

Hi sir, I checked what Pertua Oil can do and based on appearance, the oil is very thick and the purpose is to fill tiny gaps to engines core to brings back efficiency. Pag inaaply to sa tiny parts like mini4wd bearings, baka lalong hindi na umikot yung bearing.

@EMSAYMADA 11 ай бұрын

@@minivictorydonkey Salamat po sa insight and knowledge ☺

@GamerPro-si2hz 11 ай бұрын

Ano pa kaya pwedeng sub sa microlon

@DevilTryingToBeGood 4 ай бұрын

16:42 what you use ? bearing or something ?

@minivictorydonkey 3 ай бұрын

It just a small washer between Spur and crown gear.

@supachaiwiriyapanon2622 7 ай бұрын

⭐⭐⭐⭐⭐

@arielbonghanoy9647 8 ай бұрын

Sir yong spacer sa gear ano size?? Na try ko mgspacer pero hindi kasya

@minivictorydonkey 8 ай бұрын

Small washer yun sir🙂

@arielbonghanoy9647 8 ай бұрын

Ano code ng spacer na yon boss? Small spacer

@minivictorydonkey 8 ай бұрын

Small washer lang sir, kasama sa HG brake plates

@DvdR-st8yf 17 күн бұрын

X brace for AA batteries

@Schjoenz 2 ай бұрын

Copper is more conductive than gold. Pero bakit gold lagi lods ang advice na terminals?

@kcyroh 26 күн бұрын

saan po maka bili ng mga parts? bagohan lng po ako sa mga tamiya at gusto ko sana sumali dito sa mga tournament sa amin.

@edwinnacis389 4 ай бұрын

Hi sir., possible pwede din lagyan tapered rollers sa front?

@minivictorydonkey 4 ай бұрын

Yes sir, you can add tapered rollers when you feel needed👍

@edwinnacis389 4 ай бұрын

@@minivictorydonkey ilan spacer bearing ilalagay sa green gear sir?

@frangie9858 11 ай бұрын

FIGHTING OPPA!

@keylufire9918 4 ай бұрын

Pwede ko ba gayahin to with different mach frame chasis sir? Newbie lang po. Salamat.

@minivictorydonkey 3 ай бұрын

Yes sir, experimenting is very essential.

@happyRTK 3 ай бұрын

프론트 카본 플레이트에 영상처럼 댐퍼를 달게 되면 주행 후 이탈 시 댐퍼를 끼운 나사가 뒤로 휘게 되는 경우가 있는데, 그렇게 되면 프론트 롤러 각이 변할 수도 있기 때문에 개인적으로 비추천 합니다.

@minivictorydonkey 3 ай бұрын

Hi, I unsderstand what you're trying to say here. Thanks for google translation😅. Don't worry about screws to bend whenever machines comes off the track. Chassis is the most important when it comes to damage during impact. This is my challenge for you. Try my front build versus any front build you like. Then let it run and direct hit them to the hard wall. Then see the result for yourself. Screw is nothing important than chassis🫰🙂

@pushpopaddict 10 ай бұрын

what spray you use its in japanese

@minivictorydonkey 9 ай бұрын

Just a regular parts cleaner🙂

@impogoyo1156 7 ай бұрын

Sir ano po page nyo sa fb sir? May mga question po ako hehehe newbie palang po kasi

@minivictorydonkey 7 ай бұрын

Join ka sir dito "B-MAX PINAS MINI4WD", I am one of the admins facebook.com/groups/494340599565163/?ref=share

@imy004 11 ай бұрын

Why did you mixed the new and old bearings 😬

@minivictorydonkey 11 ай бұрын

Hi sir, the bearing you're meantioning is also brand new, it just opened a days ago

@imy004 11 ай бұрын

@@minivictorydonkey oh i thought the rest were old bearings 😆 anyway the rest were good and thanks for the video

@giancarlosta.romana8162 6 ай бұрын

Can you put all the accessories you put in your oppa tamiya

@minivictorydonkey 6 ай бұрын

Try 2:40

@MGMdPrince1 4 ай бұрын

Ano yung katumbas ng Microlon dito sa Pilipinas?

@junjunjun5105 12 күн бұрын

Sir size ng tamiya empty bottle? 10ml? Kasya ba if submerge ung motor?

@minivictorydonkey 7 күн бұрын

try the taller one, 46ml (81042)

@junjunjun5105 7 күн бұрын

@@minivictorydonkeythank you sir sa info

@nixonmewengkang1030 10 ай бұрын

Are all the Tamiya brand tracks in the last circuit?

@minivictorydonkey 10 ай бұрын

Hi sir thank you for asking. All section are genuine tamiya except for Digital curve, its a EXDT01 Digital Turn by "Street Jim".

@nixonmewengkang1030 10 ай бұрын

@@minivictorydonkey thanks for the answer. As far as your experience goes, have you ever tried to build a unit using the SFM chassis type?

@minivictorydonkey 10 ай бұрын

Honestly I don't have enough experince in Super FM, but will try to make one and see how it performs in modern style of racing. But I have friend using FM chassis and it's so good.

@nixonmewengkang1030 10 ай бұрын

@@minivictorydonkey that is good news from someone more experienced than me.. I really can't wait for your new build SFM ... 😇

@adityarahmansidqi6451 Ай бұрын

where i can buy microlon ?

@minivictorydonkey Ай бұрын

Microlon may not be available at certain region or country. Mines is from Japan👍

@user-nt8dp6ig8c 8 ай бұрын

weird front bumper if you ask me.

@minivictorydonkey 5 ай бұрын

Its actually rear plates, but the shape is perfect also for front🫰😁

@bienamorpesa 11 ай бұрын

may i know the item code for the rollers? tnx!

@minivictorydonkey 11 ай бұрын

Hi sir, all items and item numbers are already in the video

@bienamorpesa 11 ай бұрын

@@minivictorydonkey oh sorry. my bad! thanks for your help

@supermarkg7994 3 ай бұрын

Boss paturo pano ikabit yung hi mount tube stabilizer. Naskip sa vid hehe

@minivictorydonkey 2 ай бұрын

Hi sir, check here🙂 kzfaq.info/get/bejne/nc6UesqGyJiuoGg.htmlsi=6jNIkCQcVYXF_GbZ

@supermarkg7994 2 ай бұрын

@@minivictorydonkeythanks bossing!

@jnasty187 9 ай бұрын

akin nlng 2 please

@Carrot747 11 ай бұрын

ano yung propeller shaft mo idol holllow gitna??

@minivictorydonkey 11 ай бұрын

Yes sir, 3:10 mark

@Carrot747 11 ай бұрын

@@minivictorydonkey anu po name baka meron po sa shopee? at ilang mm po??

@godwinrazon 2 ай бұрын

Sir, pwede ba magpaturo ng magbuild po?

@ernestmendoza7795 Ай бұрын

San nkaka bili ng MICROLON lods?

@minivictorydonkey Ай бұрын

Sa Japan po meron😀

@thenextlevelplay4486 4 ай бұрын

Sir, sa 5:59 po, ano po name ng special tools? Newbie here. Thank you sir 😊

@KuyaNiks26 Ай бұрын

Disassembler boss

@andreitolentino4231 10 ай бұрын

idol sir, paturo po about sa fitting ng tires, sana ma contact ko po kayo kahit msnger lang po. salamat po. keep safe idol 💯💯💯💯💯💯

@minivictorydonkey 10 ай бұрын

Hi sir, thank you po sa comment You can meet me at this FB group facebook.com/groups/494340599565163/?ref=share

@andreitolentino4231 10 ай бұрын

@@minivictorydonkey wow thankyou sir :)

@sinsinsss5216 9 ай бұрын

Tergantung cc... Jarak

@dansoytv4597 4 ай бұрын

hello po sana mapansin pwede po ba ako maka hingi spare parts tamiya po newbie lang po kasi and gusto ko po sana maka alam paunti2x salamat po 🙏 pang Christmas lang po 🎄

@aiinaku123 10 ай бұрын

Sir anong brake settings nito?

@minivictorydonkey 10 ай бұрын

Hi sir, depende po sa track layout at laro ng car midair. Try 1mm front 3mm rear base sa setting ng car sa video.👍

@aiinaku123 10 ай бұрын

@@minivictorydonkey Thank you Sir. Anong kulay naman po ng brakes?

@sinsinsss5216 9 ай бұрын

Sing ta maksut awl mu tercepat paling ringan..... Podo prinsip kereta cepat...

@perry10161987 11 ай бұрын

What is microlon? Where can I get it?

@minivictorydonkey 11 ай бұрын

Hi sir, Microlon is a metal treatment oil that gives coating and makes metal surface very smooth and prevents any corrosion for decent period of time.

@perry10161987 11 ай бұрын

@@minivictorydonkey could you tell me where to get it?

@minivictorydonkey 11 ай бұрын

I am sorry to tell that it might difficult to find depends on your location. This elements is bit pricy too😔

@ronparcs8990 6 ай бұрын

Hello, Just to ask if what type of Microlon did you used? because microlon is a brand name.

@thenextlevelplay4486 4 ай бұрын

sir, ano po size nung spacer? Sana mapansin mo po. Salamat po

@minivictorydonkey 4 ай бұрын

6mm and 12mm for rear rollers thank you sir sa mga comments and questions

@thenextlevelplay4486 4 ай бұрын

@@minivictorydonkey salamat din po sir.