【ミニ四駆】Tamiya Mini 4WD Testing: How To Clear Jump Ramps

Рет қаралды 29,520

Z3N Bluster

Күн бұрын

Tutorial on how to clear Jump Ramps.

Пікірлер: 47

@michaelkristantoprasetyo2238 7 жыл бұрын

finally. thanks for the tutorial :D

@julianpermana1882 6 жыл бұрын

which one is better for clearing jump ramps, front body damper or rear body damper AR chassis?

@prasetyowangunhardjo6389 2 жыл бұрын

Are there any tutorial to beat jump ramp with a side damper class?

@galihargo6997 6 жыл бұрын

Hi mr i want to ask you does hanging damper setup affect youe jump? Like if the engine is on the rear you put the pivot point on the rear? Sorry my english is not good

@Z3NBluster 6 жыл бұрын

Galih Argo Probably. That's is not something I've tested.

@ArdaJsf 6 жыл бұрын

Hi this is nice information, how ever my cars keep flipping over to the front and land up side down, feels like its front heavy. im using MA Chassis. could you give a tips. cheers

@Z3NBluster 6 жыл бұрын

KAYA Studio I already mentioned in this video that if you follow same setup and use it on MA or MS, it should work.

@llawliet371 6 жыл бұрын

Hey man. Can you do a video on how to clear lane change? I'm having problem with it atm though I think I'll try to have a 19mm front rollers so that it'll align perfectly with my rear rollers. Hopefully it will be more stable then.

@Z3NBluster 6 жыл бұрын

Are you talking about the 3-lane lanechange? The best way that I can help you is if you send me pictures of your setup on Instagram. Send me a message there with a picture of your car and the layout of the track that you're having problems with.

@marclouiesulit7277 7 жыл бұрын

what is the front and back "roller to roller width" of your car?

@Z3NBluster 7 жыл бұрын

Front - 102.77 Rear 102.60

@budisetiawan3930 7 жыл бұрын

I wear ms suspension, hyperdash engine gear 3.5: 1 tire size 26mm, is it the same for setting pass jumpramp ???

@Z3NBluster 7 жыл бұрын

I don't know if wheel diameter matters. In the video on my car I use 26mm. I only talk about front underguard and rear brake clearance. 1.9-2mm front underguard clearance. 1mm clearance rear brake. (Do not put brake on front underguard)

@budisetiawan3930 7 жыл бұрын

ok,, thanks,, i try my ms suspensi,,,

@brentjames5450 5 жыл бұрын

how to align wheels?? can u make a vid of how to align mini4wd wheels?

@Z3NBluster 5 жыл бұрын

I don't align wheels. I just make sure the shafts I use are already straight before I mount them on the car.

@amrynursam304 7 жыл бұрын

Hey z3n, how bout AR chassis..? Today i have a race indo cup, and to bad i lose coz jump rump... :(

@Z3NBluster 7 жыл бұрын

I explain what to do in this video. The same setup also works on AR...

@amrynursam304 7 жыл бұрын

+Z3N Bluster ok. I ll try it. Today is the final. I hope its gona work.. Thx dude...

@Z3NBluster 7 жыл бұрын

+Amry Nursam Make sure you use no brake pads on the front underguard. If you do not follow that, it will not work.

@amrynursam304 7 жыл бұрын

+Z3N Bluster hy dude, im back, its work but when i use gear speed and ultra dash, my car is out, some times my car do a back flip. i think it coz my body damper..? What dou you think..?

@AndreTan28 6 жыл бұрын

Where do the jump ramps come from?

@Z3NBluster 6 жыл бұрын

Andre Tan Tamiya makes them

@AndreTan28 6 жыл бұрын

Oh. Alright. I'll look for some here. Thanks for the reply brother! Much love from the PH dude. Keep up the videos!

@riyadimarcelino7437 7 жыл бұрын

zen, my car is MA chassis and long tail so i can use your setup ini this video for jump ramps

@Z3NBluster 7 жыл бұрын

Riyadi Marcelino I can't say for sure that your car will be okay since I don't know what it looks like. But if you follow the exact clearances I mentioned in this video. Your car should be fine. No brakes in front 1.9-2mm front clearance no brakes at all. And rear 1mm clearance with brakes. MA and MS should be able to clear this just fine. I have noticed that FM-type setups will have more difficulty. And also, if you are asking a question, you should always end the question with a question mark, "???"

@riyadimarcelino7437 7 жыл бұрын

Z3N Bluster oh okay zen. sorry I'm not using mark "??" ahh and you have facebook or whatsapp?? so i can learn more setup from you. because I'm not always open my youtube.

@Z3NBluster 7 жыл бұрын

Riyadi Marcelino I'm on Instagram. I have my username in my KZfaq about page. Contact me there.

@riyadimarcelino7437 7 жыл бұрын

Z3N Bluster oke zen I'll follow your Instagram. thanks

@adrians5783 3 жыл бұрын

It better . It was slower when at the jump ramps. Better... . Good setting. I guessed. Stability.

@xbrym 5 жыл бұрын

how to clear it using prostock build???

@Z3NBluster 5 жыл бұрын

What are prostock rules?

@xbrym 5 жыл бұрын

using only parts from the kit..can mix parts from other kits.. - can use double plastic rollers - any motors(untampered and sealed) - no ball bearing guided part - parts from high end kits are not allowed

@Z3NBluster 5 жыл бұрын

Maybe you should go slow? Lol. We don't race that category here in the States.

@carllimp711 6 жыл бұрын

Kuya puwede ba gray and black spong brake

@Z3NBluster 6 жыл бұрын

Carl Limp whatever I say in the video is what you should do. Not Gray and Black. Gray in the back ONLY.

@Z3NBluster 6 жыл бұрын

But you can test Black ONLY. See if that also works. Mixing and matching doesn't really do anything. Because remember I said, "No Brakes in the Front."